Condition : Brand New

Warranty : 1 Year

Part Number : 3M 10336

Manufacturer : Mitsubishi Electric

Estimated Lead Time : 7-10 working days.

Manufacturer : Mitsubishi Electric

Product No. : A6TBX36E

Product type : Terminal Block Converter Module

For negative common type input modules (standard type)

Applicable wire size : 0.75 to 2mm

Shipping Weight : 1.5 Kg

Estimated Lead Time : 7-10 working days.

Manufacturer : Mitsubishi Electric

Product No. : AC30TB-E

Product type : Terminal Block Cable

Shipping Weight : 1.5 Kg

Estimated Lead Time : 7 - 10 working days.

Manufacturer : Mitsubishi Electric

Product No. : AJ65SBTB1-16DT1

Product type : Input/Output Combined Module

8 input points DC24V(5mA) 1-wire type response time 0.2ms 

8 output points DC24V(0.5A) 1-wire type transistor output terminal block type

Common wiring method 16 points/1 common (Terminal block single wire type) 

Number of stations occupied 1 station 32 points assignment (use 16 points)

Shipping weight : 5 Kg

Estimated Lead Time : In stock. Usually ships in 7-10 working days

Manufacturer : Mitsubishi Electric

Number of output points : 8 points

Isolation method : Photocoupler

Rated load voltage : 100 to 240 V AC 50/60 Hz±5 %

Load voltage distortion rate : Within 5 %

Max. load voltage : 264 V AC

Max. load current : 0.6 A/point 2.4 A/common

Min. load voltage/current : 50 V AC 100 mA, 100 V AC 10 mA, 240

Shipping Weight : 2.5 Kg

Estimated Lead Time : In stock. Usually ships in 7-10 working days.

Manufacturer : Mitsubishi Electric

AJ65VBTCU-68ADVN

CC-Link analog-to-digital conversion unit AJ65VBTCU-68ADVN

Number of analog input points : 8 points (8 channels)

Analog input Voltage : DC-10 to + 10 V (input resistance value: 1 MΩ)

Digital output : -4096 to + 4095

I / O characteristics, resolution Input range : Digital output value (maximum resolution)

Voltage input 0 to 5 V : 0 to 4000 (1.25 mV)

1 to 5 V : 0 to 4000 (1.0 mV)

-10 to 10 V : -4000 to 4000 (2.5 mV)

User range setting 1 (-10 to 10 V) : -4000 to 4000 (2.5 mV)

User range setting 2 (0 to 5 V) : 0 to 4000 (1.0 mV)

Accuracy (accuracy with respect to the maximum value of the digital output value) Ambient temperature: 25 ± 5 ° C : ± 0.3%

Ambient temperature: 0 to 55 ° C : ± 0.2%

A / D conversion speed : 1 ms / channel

Absolute maximum input Voltage : ± 15 V

Insulation method : Communication system and analog input at one time: Photocoupler Isolated power supply system and analog input at one time: Transformer Isolation channel to non-insulation

Withstand voltage : Power supply . Communication system all together and analog input Bulk: AC 500 V 1 minute

Protection grade : IP 1 XB

Station type : Remote device station (Ver.1 remote device station or Ver.2 remote device station)

Number of occupied stations : Ver.1 Remote device station: 3 stations Ver.2 Remote device station: 1 station (extended cyclic setting: 4 times)

Unit power supply Voltage : DC 24 V (DC 20.4 to 26.4 V, ripple ratio within 5%)

Current : 0.10 A (24 VDC)

Inrush current : 4.2 A, 1.2 ms or less

External wiring connection method : One-touch connector for communication (sold separately) Unit power supply unit: Power supply . One touch connector for FG (sold separately) Input / output unit: One touch connector for I / O (sold separately)

communication cable : Ver.1.10 compatible CC-Link dedicated cable: FANC-110SBH, FA-CBL 200PSBH, CS-110

External dimensions Height (H) : 115 mm

Width (W) : 41 mm

Depth (D) : 67 mm

mass : 0.17 Kg

Operating ambient temperature : 0 to 55 ° C

Storage ambient temperature : -20 to 75 ° C

Ambient operating humidity : 10 to 90% RH, non condensing

Storage ambient humidity : 10 to 90% RH, non condensing

Anti-vibration Meets JIS B 3502, IEC 61131-2 When there is intermittent vibration : Frequency: 5 to 8.4 Hz, One amplitude: 3.5 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 9.8 m / s 2 Sweep count: 10 times in X, Y, Z directions

When there is continuous vibration : Frequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2

Impact resistance : Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)

Use atmosphere : No corrosive gas

Use elevation : 0 to 2000 m

Installation location : In the control panel

Over voltage category : II or less

Pollution degree : 2 or less

Shipping Weight : 1.2 Kg

Estimated Lead Time : In stock. Usually ships in 7-10 working days.

Manufacturer : Mitsubishi Electric

AJ65VBTCU-68DAVN

CC - Link Digital - Analog Conversion Unit AJ65VBTCU - 68DAVN

Number of analog output points : 8 points (8 channels)

Digital input : -4096 to + 4095

Analog output Voltage : DC-10 to + 10 V (external load resistance value: 2 kΩ to 1 MΩ)

I / O characteristics, resolution Output range : Digital input value (maximum resolution)

Voltage output 0 to 5 V : 0 to 4000 (1.25 mV)

1 to 5 V : 0 to 4000 (1 mV)

-10 to 10 V : -4000 to 4000 (2.5 mV)

User range setting 1 (-10 to 10 V) : -4000 to 4000 (2.5 mV)

User range setting 2 (0 to 5 V) : 0 to 4000 (1 mV)

Accuracy (accuracy with respect to the maximum value of the analog output value) Ambient temperature: 25 ± 5 ° C : ± 0.2%

Ambient temperature: 0 to 55 ° C : ± 0.3%

D / A conversion speed : 1 ms / channel

Absolute maximum output Voltage : ± 12 V

Output short circuit protection : There

Insulation method : Communication system and analog output at one time: Photocoupler Isolated power supply system and analog output at one time: Transformer Isolation channel to non-insulation

Withstand voltage : Power supply . Communication system all together and analog output Batch: AC 500 V for 1 minute

Protection grade : IP 1 XB

Station type : Remote device station (Ver.1 remote device station or Ver.2 remote device station)

Number of occupied stations : Ver.1 Remote device station: 3 stations Ver.2 Remote device station: 1 station (extended cyclic setting: 4 times)

Unit power supply Voltage : DC 24 V (DC 20.4 to 26.4 V, ripple ratio within 5%)

Current : 0.15 A (at 24 VDC)

Inrush current : 4.3 A, 1.2 ms or less

External wiring connection method : One-touch connector for communication (sold separately) Unit power supply unit: Power supply . One touch connector for FG (sold separately) Input / output unit: One touch connector for I / O (sold separately)

communication cable : Ver.1.10 compatible CC-Link dedicated cable: FANC-110SBH, FA-CBL 200PSBH, CS-110

External dimensions Height (H) : 115 mm

Width (W) : 41 mm

Depth (D) : 67 mm

mass : 0.16 Kg

Operating ambient temperature : 0 to 55 ° C

Storage ambient temperature : -20 to 75 ° C

Ambient operating humidity : 10 to 90% RH, non condensing

Storage ambient humidity : 10 to 90% RH, non condensing

Anti-vibration Meets JIS B 3502, IEC 61131-2 When there is intermittent vibration : Frequency: 5 to 8.4 Hz, One amplitude: 3.5 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 9.8 m / s 2 Sweep count: 10 times in X, Y, Z directions

When there is continuous vibration : Frequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2

Impact resistance : Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)

Use atmosphere : No corrosive gas

Use elevation : 0 to 2000 m

Installation location : In the control panel

Over voltage category : II or less

Pollution degree : 2 or less

Shipping Weight : 1.2 Kg

Estimated Lead Time : In stock. Usually ships in 7-10 working days.

Manufacturer : Mitsubishi Electric

FX3U-3A-ADP

Analog input / output adapter FX3U - 3A - ADP

Analog input Analog input range Voltage input : DC 0 to 10 V (input resistance 198.7 kΩ)

Current input : DC 4 to 20 mA (input resistance 250 Ω)

Number of input channels : 2 channels

Absolute maximum input Voltage input : -0.5 V, +15 V

Current input : -2 mA, +30 mA

Input characteristics : Input mode (voltage / current input) can be set for each channel.

Digital output : 12 bit binary

resolution Voltage input : 2.5 mV (10 V x 1/4000)

Current input : 5 μA (16 mA X 1/3200)

Overall precision Voltage input : Ambient temperature 25 ° C ± 5 ° C ± 0.5% (± 50 mV) to full scale 10 V Ambient temperature 0 ° C to 55 ° C ± 1.0% (± 100 mV) to full scale 10 V

Current input : Ambient temperature 25 ° C ± 5 ° C ± 0.5 % (± 80 μA) against full scale 16 mA Ambient temperature 0 ° C to 55 ° C ± 1.0% (± 160 μA) for full scale 16 mA

A / D conversion time When FX3U / FX3UC sequencer is connected : 80 μs X Number of used input channels + 40 μs X Number of output output channels (data update every calculation cycle)

When FX3S / FX3G / FX3GC programmable controller is connected : 90 μs X number of used input channels + 50 μs X number of output output channels (data update every calculation cycle)

Insulation method : . Insulation between analog input / output section and sequencer by photo coupler . Insulation between drive power supply and analog input / output section by DC / DC converter . No isolation between each channel

Analog output Analog output range Voltage output : DC 0 to 10 V (external load resistance 5 k to 1 MΩ)

Current output : DC 4 to 20 mA (external load resistance 500 Ω or less)

Number of output channels : 1 channel

Output characteristics : Output mode (voltage / current output) can be set.

Digital input : 12 bit binary

resolution Voltage output : 2.5 mV (10 V x 1/4000)

Current output : 4 μA (16 mA X 1/4000)

Overall precision Voltage output : Ambient temperature 25 ° C ± 5 ° C ± 0.5% (± 50 mV) to full scale 10 V Ambient temperature 0 ° C to 55 ° C ± 1.0% (± 100 mV) to full scale 10 V External load resistance (Rs) is less than 5 kΩ In addition, the following calculations increase. (It increases by 100 mV per 1%.) 47 X 100 / (Rs + 47) - 0.9 (%)

Current output : Ambient temperature 25 ° C ± 5 ° C ± 0.5 % (± 80 μA) against full scale 16 mA Ambient temperature 0 ° C to 55 ° C ± 1.0% (± 160 μA) for full scale 16 mA

D / A conversion time When FX3U / FX3UC sequencer is connected : 80 μs X Number of used input channels + 40 μs X Number of output output channels (data update every calculation cycle)

When FX3S / FX3G / FX3GC programmable controller is connected : 90 μs X number of used input channels + 50 μs X number of output output channels (data update every calculation cycle)

Insulation method : . Insulation between analog input / output section and sequencer by photo coupler . Insulation between drive power supply and analog input / output section by DC / DC converter . No isolation between each channel

Number of occupied I / O points : 0 point (It does not relate to the maximum input / output point number of the sequencer)

Application sequencer : FX3S, FX3G (Ver.1.20 or later), FX3U (Ver.2.61 or later), FX3GC, FX3UC (Ver.2.61 or later) FX3S - CNV - ADP is required for connection to FX3S. For connection to FX 3 G, FX 3 G - CNV - ADP is required. To connect to FX3U and FX3UC - 32MT - LT (-2), a function expansion board is required.

mass : About 0.1 Kg

Power supply Conversion circuit drive power supply : DC24 V + 20% -15% 90 mA Connect a 24 VDC power supply to the terminal block and supply it.

Interface drive power supply : DC 5 V 20 mA Internal power is supplied from the DC 5 V power supply of the basic unit.

Ambient temperature : 0 to 55 ° C. ... Operating -25 to 75 ° C. ..... Save

Relative humidity : 5 to 95% RH (noncondensing).... in operation

Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total)

Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 X, Y, Z 10 times in each direction (80 minutes in total)

Direct installation Frequency: 10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total)

Frequency: 57 to 150 Hz : Acceleration: 9.8 m / s 2 10 times in X, Y, Z directions (80 minutes in total)

Impact resistance : 147 m / s 2 , working time 11 ms, three times in X, Y, Z directions with a sine half-wave pulse

Noise immunity : Noise voltage with 1,000 Vp-p, noise width 1 μs, rising 1 ns, with noise si

tor with period of 30 to 100 Hz

Withstand voltage : Between all terminals and ground terminal: 500 VAC for 1 minute

Insulation resistance : Between all terminals and ground terminal: 500 MV DC 500 MΩ or more with an insulation resistance meter

ground : Class D grounding (grounding resistance: 100 Ω or less)Grounding should be dedicated ground or common ground.

Use atmosphere : There is no corrosive property, flammable gas, conductive dust (dust) is not serious

Use altitude : Can not be used in an environment pressurized to 2000 m or less under atmospheric pressure. It may break down.

Shipping Weight : 1.1 Kg

Estimated Lead Time : In stock. Usually ships in 7-10 working days.

Manufacturer : Mitsubishi Electric

FX3U-4AD-PT-ADP

Analog input adapter for Pt 100 type temperature sensor FX 3 U - 4 AD - PT - ADP

Temperature sensor . temperature control input signal : Platinum resistance temperature detector 3 wire type Pt 100 JIS C 1604 - 1997

Number of input channels : 4 channels

Rated temperature range : -50 ° C to + 250 ° C (-58

Estimated Lead Time : In stock. Usually ships in 7-10 working days.

Manufacturer : Mitsubishi Electric

FX1N-1DA-BD

Analog output board FX1N - 1DA - BD

Analog output Analog output range Voltage output : DC 0 V to 10 V (external load resistance 2 kΩ to 1 MΩ)

Current output : DC 4 mA to 20 mA (external load resistance 500 Ω or less)

Number of output channels : 1 channel

Output characteristics : Output characteristics can not be adjusted.

Digital input Voltage output : 12 bit binary

Current output : 11 bit binary

resolution Voltage output : 2.5 mV (10 V x 1/4000)

Current output : 8 μA (16 mA X 1/2000)

Overall precision Voltage output : ± 1% (± 0.1 V) for full scale 10 V

Current output : ± 1% (± 0.16 mA) for full scale 16 mA

D / A conversion time : Approximately 10 ms (D / A conversion started with the END instruction, output after approximately 10 ms)

Insulation method : No isolation between analog input and sequencer, between channels

Number of occupied I / O points : 0 point (It does not relate to the maximum input / output point number of the sequencer)

Application sequencer : FX 1 S (V 2.0 or later), FX 1 N (V 2.0 or later)

Power supply : Internal power supply from the sequencer

Ambient temperature : 0 to 55 ° C. ... Operating -20 to 70 ° C. ... Save

Relative humidity : 35 to 85% RH (noncondensing)...at operation

Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz : Amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total)

Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 X, Y, Z 10 times in each direction (80 minutes in total)

Direct installation Frequency: 10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total)

Frequency: 57 to 150 Hz : Acceleration: 9.8 m / s 2 10 times in X, Y, Z directions (80 minutes in total)

Impact resistance : 147 m / s 2 , working time 11 ms, three times in X, Y, Z directions with a sine half-wave pulse

Noise immunity : Noise voltage with 1,000 Vp-p, noise width 1 μs, rising 1 ns, with noise si

tor with period of 30 to 100 Hz

Withstand voltage : Non-insulated between analog output part and PLC main body (Do not perform withstand voltage test)

Insulation resistance : Non-insulated between the analog output part and the programmable controller (Do not conduct the insulation resistance test)

Use atmosphere : There is no corrosive property, flammable gas, conductive dust (dust) is not serious

Use altitude : It can not be used under an environment pressurized to 2,000 m or less under atmospheric pressure. It may break down.

Shipping Weight : 1.5 Kg

Estimated Lead Time : In stock. Usually ships in 7-10 working days

Manufacturer : Mitsubishi Electric

Part number : A0J2CPU

Control method : Stored program, repetitive operation

I/O control method : Direct system

Programming language : Language dedicated to sequence control (combined use of relay symbol type, logic symbolic language and SAP language)

Sequence Instruction : 21 types

Basic instruction : 38 types

Application instruction : 21 types

Processing speed : Sequence instruction 4.4 to 5.6μs/step

Memory capacity : Max, 7k steps

Number of I/O points : 336 points (maximum 480 points when using extension base unit)

Self diagnostic function : Watch dog timer error monitor, battery error

AC down detection blown fuse detection, etc

Allowable instantaneous power failure period : Within 20ms

Weight : 0.75 kg

Shipping Weight : 2.8 Kg

Estimated Lead Time : In stock. Usually ships in 7-10 working days.

Manufacturer : Mitsubishi Electric

Q2MEM-16MBA

Q2MEM-16MBA

Memory type : ATA card

Memory capacity after formatting : 15982 KB

Number of storable files : 512 pieces

Number of insertion and removal : 5000 times

Number of writes : A million times

External dimensions Height (H) : 45 mm

Width (W) : 42.8 mm

Depth (D) : 3.3 mm

mass : 15 g

General specification : Refer to general specifications of CPU module.

Shipping Weight : 1 Kg

Estimated Lead Time : In stock. Usually ships in 7-10 working days.

Manufacturer : Mitsubishi Electric

Q2MEM-32MBA

ATA card Q2MEM-32MBA

Memory type : ATA card

Memory capacity after formatting : 31854 KB

Number of storable files : 512 pieces

Number of insertion and removal : 5000 times

Number of writes : A million times

External dimensions Height (H) : 45 mm

Width (W) : 42.8 mm

Depth (D) : 3.3 mm

mass : 15 g

General specification : Refer to general specifications of CPU module.

Shipping Weight : 1 Kg

Estimated Lead Time : In stock. Usually ships in 7-10 working days.

Manufacturer : Mitsubishi Electric

Q2MEM-8MBA

ATA card Q2MEM-8MBA

Memory type : ATA card

Memory capacity after formatting : 7982 KB

Number of storable files : 512 pieces

Number of insertion and removal : 5000 times

Number of writes : A million times

External dimensions Height (H) : 45 mm

Width (W) : 42.8 mm

Depth (D) : 3.3 mm

mass : 15 g

Shipping Weight : 1 Kg

Estimated Lead Time : In stock. Usually ships in 3-5 working days.

Manufacturer : Mitsubishi Electric

Q00JCPU

Basic model QCPU Q00JCPU

control method : Stored program iteration operation

Input / output control method : Refresh method (Direct access input / output possible by specifying direct access input / output (DX, DY))

Programming language Sequence control language : Relay symbol word, logic symbolic word, MELSAP 3 (SFC), MELSAP-L, function block, structured text (ST)

processing speed Sequence instructions LD X 0 : 200 ns

MOV D 0 D 1 : 700 ns

Constant scan : 1 ~ 2000 ms (Can be set in 1 ms increments)

Program capacity : 8K steps (32K bytes)

Memory capacity Program memory (drive 0) : 58 KB

Standard ROM (Drive 4) : 58 KB

Maximum number of stored files Program memory : 6

Standard ROM : 6

Intelligent functional unit Parameter Maximum setting number Initial setting : 512 pieces

refresh : 256 pieces

Number of input / output devices : 2048 points (X / Y 0 to 7 FF)

Number of input / output points : 256 points (X / Y 0 to FF)

Number of device points Internal relay [M] : Default 8192 points (M0 to 8191) (changeable)

Latch relay [L] : Default 2048 points (L0 to 2047) (changeable)

Link relay [B] : Default 2048 points (B 0 - 7 FF) (changeable)

Timer [T] : Default 512 points (T0 to 511) (Shared with low-speed timer / high-speed timer) (Changeable) Low-speed timer / high- speed timer specified by instruction Low-speed timer / high-speed timer measurement unit is set by parameter (low-speed timer: 1 to 1000 ms, 1 ms increment, default 100 ms) (High-speed timer: 0.1 to 100.0 ms, 0.1 ms increments, default 10.0 ms)

Integration timer [ST] : Default 0 point (Shared with low speed integration timer / high speed integration timer) (Changeable) Low speed integration timer / high speed integration timer specified by instruction Set the measurement unit of low speed integration timer / high speed integration timer by parameter (low speed integration timer: 1000 ms, 1 ms increment, default 100 ms) (High-speed integration timer: 0.1 to 100.0 ms, 0.1 ms increments, default 10.0 ms)

Counter [C] : Normal counter: default 512 points (C 0 to 511) (changeable) Interrupt counter: maximum 128 points (default 0 point, set by parameter)

Data register [D] : Default 11136 points (D0 to 11135) (changeable)

Link register [W] : Default 2048 points (W 0 to 7 FF) (changeable)

Annunciator [F] : Default 1024 points (F0 to 1023) (changeable)

Edge relay [V] : Default 1024 points (V 0 to 1023) (changeable)

Link special relay [SB] : 1024 points (SB 0 to 3 FF) (Device number is fixed)

Link special register [SW] : 1024 points (SW 0 to 3 FF) (the number of device points is fixed)

Step relay [S] : 2048 points (S 0 ~ 127 / block) (Device number is fixed)

Index register [Z] : 10 points (Z 0 ~ 9) (Device number is fixed)

Pointer [P] : 300 points (P 0 ~ 299) (Device number is fixed)

Interrupt pointer [I] : 128 points (I 0 to 127) ( Number of device points is fixed) Periodic interval of system interrupt pointer I 28 to 31 can be set by parameter. (2 to 1000 ms, 1 ms increments) Default I 28: 100 ms, I 29: 40 ms, I 30: 20 ms, I 31 : 10 ms

Special relay [SM] : 1024 points (SM 0 ~ 1023) (Device number is fixed)

Special register [SD] : 1024 points (SD 0 ~ 1023) (Device number is fixed)

Function input [FX] : 16 points (FX 0 to F) (Device number is fixed)

Function output [FY] : 16 points (FY 0 to F) (the number of device points is fixed)

Function register [FD] : 5 points (FD 0 ~ 4) (Device number is fixed)

Link direct device : J□□ \ X□□, J□□ \ Y□□, J□□ \ SB□□, J□□ \ SB□□, J□□ \ SB□□, J□□ \ SW□□, J□□ \ SW□ Device specification form for directly accessing the link device of the network unit□

Intelligent functional unit device : Device specification that directly accesses buffer memory of intelligent function module Format: U□□ \ G□□

Latch (power outage hold) range : L 0 to 2047 (default 2048 points) [latch range can be set for B, F, V, T, ST, C, D, W]

RUN / PAUSE contact : One point of each RUN / PAUSE contact can be set from X 0 to 7 FF

Clock function : Year, month, day, hour, minute, second, day of the week (leap year automatic discrimination) accuracy: -3.20 ~ + 5.27s (. TYP + 1.98s) / d at 0 °C accuracy: -2.57 ~ + 5.27s (TYP + . 2.22 s) / d at 25 ° C. Accuracy: -11.68 to +3.65 s (TYP. -2.64 s) / d at 55 ° C.

Allowable momentary power failure time : Within 20 ms (AC 100 V or more)

DC 5 V Internal current consumption : 0.26 A

External dimensions Height (H) : 98 mm

Width (W) : 244.4 mm

Depth (D) : 98 mm

mass : 0.66 Kg

Power supply part :

Input supply voltage : AC 100 to 240 V (-15% to + 10%)

Input frequency : 50/60 Hz ± 5%

Input voltage distortion ratio : Within 5%

Input maximum apparent power : 105VA

Inrush current : 40 A within 8 ms

Rated output current DC 5V : 3A

Overcurrent protection DC 5V : 3.3 A or more

Overvoltage protection DC 5V : 5.5 to 6.5 V

efficiency : 65% or more

Withstand voltage : Input . LG collective and output . FG all at once AC 2300 V / 1 min (altitude 0 to 2000 m)

Insulation resistance : Input . LG collective and output . Between FG batch, input batch and LG, batch output and FG: 500 MV DC insulation resistance meter 10 MΩ or more

Operation indication : LED display (normal: green lighting, abnormal: off, CPU part "POWER" LED)

fuse : Built-in (user replaceable)

Contact output unit : None

External wiring connection method : Screw terminal block (M3.5 screw)

Base part :

Number of input / output units : Five

Applicable unit : MELSEC-Q series unit

Operating ambient temperature : 0 to 55 ° C

Storage ambient temperature : -25 to 75 ° C

Ambient operating humidity : 5 to 95% RH, non condensing

Storage ambient humidity : 5 to 95% RH, non condensing

Anti-vibration Meets JIS B 3502, IEC 61131-2 When there is intermittent vibration : Frequency: 5 to 8.4 Hz, One amplitude: 3.5 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 9.8 m / s 2 Sweep count: 10 times in X, Y, Z directions

When there is continuous vibration : Frequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2

Impact resistance : Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)

Use atmosphere : No corrosive gas

Use elevation : 0 to 2000 m

Installation location : In the control panel

Over voltage category : II or less

Pollution degree : 2 or less

Device class : Class I

Shipping Weight : 1.7 Kg

Estimated Lead Time : In stock. Usually ships in 7-10 working days.

Manufacturer : Mitsubishi Electric

Q80BD-J71GP21S-SX

CC-Link IE Controller Network Interface Board Q80BD-J71GP21S-SX

Maximum number of links per network LB : 32 K points (32768 points, 4 K bytes)

LW : 128K points (131072 points, 256 Kbytes)

LX : 8K points (8192 points, 1 Kbyte)

LY : 8K points (8192 points, 1 Kbyte)

Maximum link points per station LB : 16 K points (16384 points, 2 K bytes), extended mode: 32 K points (32768 points, 4 K bytes)

LW : 16 K points (16384 points, 2 K bytes), extended mode: 128 K points (131072 points, 256 K bytes)

LX : 8K points (8192 points, 1 Kbyte)

LY : 8K points (8192 points, 1 Kbyte)

Transient transmission capacity : Maximum 1920 bytes

communication speed : 1 Gbps

communication cable : Optical fiber cable that meets 1000 BASE-SX standards: multimode optical fiber (GI)

Applicable connector : Double LC type connector

Laser class (JIS C 6802, IEC 60825-1) : Class 1 laser products

Total extension distance : 66000 m (when 120 units are connected)

Maximum Inter-Station Distance : 550 m

Maximum number of connected stations : 120 units (management station: 1 unit, normal station: 119 units)

Maximum number of networks : 239

Maximum number of groups : 32

Communication method : Token ring method

Transmission path format : Double loop

External power supply Voltage : DC 20.4 to 31.2 V

Current : 0.27 A

Allowable momentary power failure time : 1 ms (level PS 1)

Number of installable sheets : Up to 4 sheets

Mounting slot : PCI slot or PCI-X slot (half size)

Number of occupied slots : 1

DC 5 V Internal current consumption : 1.10 A

mass : 0.14 Kg

Operating ambient temperature : 0 to 55 ° C

Storage ambient temperature : -25 to 75 ° C

Ambient operating humidity : 5 to 95% RH, non condensing

Storage ambient humidity : 5 to 95% RH, non condensing

Anti-vibration Meets JIS B 3502, IEC 61131-2 When there is intermittent vibration : Frequency: 5 to 8.4 Hz, One amplitude: 3.5 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 9.8 m / s 2 Sweep count: 10 times in X, Y, Z directions

When there is continuous vibration : Frequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2

Impact resistance : Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)

Use atmosphere : No corrosive gas

Use elevation : 0 to 2000 m

Installation location : In the control panel

Over voltage category : II or less

Pollution degree : 2 or less

Shipping Weight : 1.2 Kg

Estimated Lead Time : In stock. Usually ships in 7-10 working days.

Manufacturer : Mitsubishi Electric

QJ71GP21S-SX

CC-Link IE Controller Network Unit QJ71GP21S-SX

Maximum number of links per network LB : 32 K points (32768 points, 4 K bytes)

LW : 128K points (131072 points, 256 Kbytes)

LX : 8K points (8192 points, 1 Kbyte)

LY : 8K points (8192 points, 1 Kbyte)

Maximum link points per station LB : 16 K points (16384 points, 2 K bytes), extended mode: 32 K points (32768 points, 4 K bytes)

LW : 16 K points (16384 points, 2 K bytes), extended mode: 128 K points (131072 points, 256 K bytes)

LX : 8K points (8192 points, 1 Kbyte)

LY : 8K points (8192 points, 1 Kbyte)

Transient transmission capacity : Maximum 1920 bytes

communication speed : 1 Gbps

communication cable : Optical fiber cable that meets 1000 BASE-SX standards: multimode optical fiber (GI)

Applicable connector : Double LC type connector

Laser class (JIS C 6802, IEC 60825-1) : Class 1 laser products

Total extension distance : 66000 m (when 120 units are connected)

Maximum Inter-Station Distance : 550 m

Maximum number of connected stations : When the management station is the universal model QCPU: 120 (management station: 1 unit, normal station: 119 units) When the management station is a high performance model QCPU: 64 units (management station: 1 unit, normal station: 63 units)

Maximum number of networks : 239

Maximum number of groups : 32

Communication method : Token ring method

Transmission path format : Double loop

External power supply Voltage : DC 20.4 to 31.2 V

Current : 0.28 A

Allowable momentary power failure time : 1 ms (level PS 1)

Number of occupied I / O points : 48 points, 2 slots (I / O assignment: free 16 points + intelli 32 points)

DC 5 V Internal current consumption : 0.90 A

External dimensions Height (H) : 98 mm

Width (W) : 55.2 mm

Depth (D) : 90 mm

mass : 0.28 Kg

Shipping Weight : 1.3 Kg

Estimated Lead Time : In stock. Usually ships in 7-10 working days.

Manufacturer : Mitsubishi Electric

AJ65BT-64RD4

CC-Link platinum resistance temperature detector Pt 100 temperature input unit AJ65BT-64RD4

Number of channels : 4 channels

Digital output Temperature measurement value : 16-bit signed binary (-1800 to 6000: value to the first decimal place X 10 times) 32-bit signed binary (-180000 to 600000: value up to the third decimal place X 1000 times)

Measuring method : 4 wire type

Usable resistance temperature detector : Pt 100, JPt 100

Measurement temperature range Pt 100 : -180 to 600 ° C

JPt 100 : -180 to 600 ° C

Output current for temperature detection : 1 mA

resolution : 0.025 °C

Overall accuracy (accuracy with respect to maximum value) Ambient temperature: 25 ± 5 ° C : ± 0.1%

Ambient temperature: 20 ° C or less, 30 ° C or more : ± 0.25%

Conversion speed : 40 ms / channel

Insulation method : Between platinum resistance temperature detector input and CC-Link transmission system: Photocoupler isolation Channel to non-insulation

Withstand voltage : Between power supply system batch and earth, power supply system batch and communication system batch, communication system batch and temperature input batch, between temperature input batch and ground: AC 500 V for 1 minute

Insulation resistance : Between power supply system batch and earth, power supply system batch and communication system batch, between communication system batch and temperature input batch, between temperature input batch and ground: 500 MV with insulation resistance meter 10 MΩ or more

Station type : Remote device station (Ver.1 remote device station)

Number of occupied stations : 4 stations

Unit power supply Voltage : DC 24 V (DC 18 to 30 V)

Current : 0.17 A

Allowable momentary power failure time : 1 ms

External wiring connection method : Communication unit, Unit power supply unit: 7 points 2-piece terminal block (M3.5 screw) I / O section: 27 points 2 piece terminal block (M3.5 screw)

communication cable : CC-Link dedicated cable

External dimensions Height (H) : 65 mm

Width (W) : 151.9 mm

Depth (D) : 63 mm

mass : 0.38 Kg

Operating ambient temperature : 0 to 55 ° C

Storage ambient temperature : -20 to 75 ° C

Ambient operating humidity : 10 to 90% RH, non condensing

Storage ambient humidity : 10 to 90% RH, non condensing

Anti-vibration Meets JIS B 3502, IEC 61131-2 When there is intermittent vibration : Frequency: 5 to 8.4 Hz , Amplitude: 3.5 mm Frequency: 8.4 to 150 Hz, Acceleration: 9.8 m / s 2 Sweep count: 10 times in X, Y, Z directions

When there is continuous vibration : Frequency: 5 to 8.4 Hz, Amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Acceleration: 4.9 m / s 2

Impact resistance : Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)

Use atmosphere : No corrosive gas

Use elevation : 0 to 2000 m

Installation location : In the control panel

Over voltage category : II or less

Pollution degree : 2 or less

Shipping Weight : 1.4 Kg

Estimated Lead Time : In stock. Usually ships in 7-10 working days.

Manufacturer : Mitsubishi Electric

AJ65BT-64RD3

CC-Link platinum resistance temperature detector Pt100 temperature input unit AJ65BT-64RD3

Number of channels : 4 channels

Digital output Temperature measurement value : 16-bit signed binary (-1800 to 6000: value to the first decimal place X 10 times) 32-bit signed binary (-180000 to 600000: value up to the third decimal place X 1000 times)

Measuring method : 3 wire type

Usable resistance temperature detector : Pt 100, JPt 100

Measurement temperature range Pt 100 : -180 to 600 ° C

JPt 100 : -180 to 600 ° C

Output current for temperature detection : 1 mA

resolution : 0.025 °C

Overall accuracy (accuracy with respect to maximum value) Ambient temperature: 25 ± 5 ° C : ± 0.1%

Ambient temperature: 20 ° C or less, 30 ° C or more : ± 0.25%

Conversion speed : 40 ms / channel

Insulation method : Between platinum resistance temperature detector input and CC-Link transmission system: Photocoupler isolation Channel to non-insulation

Withstand voltage : Between power supply system batch and earth, power supply system batch and communication system batch, communication system batch and temperature input batch, between temperature input batch and ground: AC 500 V for 1 minute

Insulation resistance : Between power supply system batch and earth, power supply system batch and communication system batch, between communication system batch and temperature input batch, between temperature input batch and ground: 500 MV with insulation resistance meter 10 MΩ or more

Station type : Remote device station (Ver.1 remote device station)

Number of occupied stations : 4 stations

Unit power supply Voltage : DC 24 V (DC 18 to 30 V)

Current : 0.17 A

Allowable momentary power failure time : 1 ms

External wiring connection method : Communication unit, Unit power supply unit: 7 points 2-piece terminal block (M3.5 screw) I / O section: 27 points 2 piece terminal block (M3.5 screw)

communication cable : CC-Link dedicated cable

External dimensions Height (H) : 65 mm

Width (W) : 151.9 mm

Depth (D) : 63 mm

mass : 0.38 Kg

Operating ambient temperature : 0 to 55 ° C

Storage ambient temperature : -20 to 75 ° C

Ambient operating humidity : 10 to 90% RH, non condensing

Storage ambient humidity : 10 to 90% RH, non condensing

Anti-vibration Meets JIS B 3502, IEC 61131-2 When there is intermittent vibration : Frequency: 5 to 8.4 Hz , Amplitude: 3.5 mm Frequency: 8.4 to 150 Hz, Acceleration: 9.8 m / s 2 Sweep count: 10 times in X, Y, Z directions

When there is continuous vibration : Frequency: 5 to 8.4 Hz, Amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Acceleration: 4.9 m / s 2

Impact resistance : Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)

Use atmosphere : No corrosive gas

Use elevation : 0 to 2000 m

Installation location : In the control panel

Over voltage category : II or less

Pollution degree : 2 or less

Shipping Weight : 1.4 Kg

Estimated Lead Time : In stock. Usually ships in 7-10 working days.

Manufacturer : Mitsubishi Electric

AJ65BT-D75P2-S3

CC-Link Positioning Unit (Open Collector Output Type) AJ65BT-D75P2-S3

Number of control axes : 2 axes

Interpolation function : 2 axis linear interpolation 2 axis circular interpolation

control method : PTP (Point To Point) control trajectory control (both linear and arc configurable) Speed ??control Speed ??/ position switching control

Control unit : mm, inch, degree, pulse

Positioning data : 600 data / axis

backup : Parameter and positioning data can be saved in flash ROM (battery less)

Positioning Positioning method PTP control : Increment method / absolute method

Speed ??/ position switching control : Increment method / absolute method

Trajectory control : Increment method / absolute method

Positioning range Absolute method : Standard mode ? -214748364.8 to 214748364.7 μm ? -21474.83648 to 21474.83647 inch ? 0 to 359.99999 degree ? -2147483648 to 2147483647 pulse stepping motor mode ? -13421772.8 to 13421772.7 μm ? -1342.17728 to 1342.17727 inch ? 0 to 359.99999 degree ? -134217728 to 134217727 pulse

Increment method : Standard mode ? -214748364.8 to 214748364.7 μm ? -21474.83648 to 21474.83647 inch ? -21474.83648 to 21474.83647 degree ? -2147483648 to 2147483647 pulse stepping motor mode ? -13421772.8 to 13421772.7 μm ? -1342.17728 to 1342.17727 inch ? -1342.17728 to 1342.17727

Estimated Lead Time : In stock. Usually ships in 7-10 working days.

Manufacturer : Mitsubishi Electric

AJ65BTB2-16DR

CC-Link remote I / O unit (DC input / contact output, terminal block) AJ65BTB2-16DR

Input specification :

Input format : DC input (plus common / minus common common type)

Number of input points : 8 points

Rated input voltage : DC 24 V (ripple ratio within 5%) (Allowable voltage range DC 19.2 to 28.8 V)

Rated input current : About 7 mA

Maximum number of simultaneous input points : 100%

ON voltage / ON current : 14 V or more / 3.5 mA or more

OFF voltage / OFF current : 6 V or less / 1.7 mA or less

Input resistance : About 3.3 kΩ

Input response time OFF → ON : 10 ms or less

ON → OFF : 10 ms or less

Input common type : 8 points / common (terminal trapezoid 2 wire type)

Input isolation method : Photocoupler isolation

Number of output points : 8 points

Rated switching voltage / current : DC 24 V 2A (resistance load) / 1 point, AC 240 V 2 A (cos φ = 1) / 1 point, 8 A / 1 common

Minimum opening / closing load : DC 5 V 1 mA

Maximum switching voltage : AC 250V DC 110V

lifespan mechanical : Over 20 million times

Electrical : Rated switching voltage . current load: 100,000 times or more AC 200 V 1.5 A, AC 240 V 1A (COS φ = 0.7): 100 thousand times or more AC 200 V 1A, AC 240 V 0.5 A (COS φ = 0.35): 100,000 times or more DC 24 V 1A, DC 100 V 0.1 A L / R = 7 ms): 100 thousand times or more

Maximum switching frequency : 3600 times / hour

Output response time OFF → ON : 10 ms or less

ON → OFF : 12 ms or less

Surge suppressor : None

Output section External power supply Voltage : DC 24 V ± 10% (ripple voltage 4 V pp or less)

Current : 45 mA or less (TYP. DC 24 V, all points ON)

Output common method : 8 points / common (terminal trapezoid 2 wire type)

Output isolation method : Photocoupler isolation

Withstand voltage : Between AC external terminal and ground: AC 1500 V 1 min DC external terminal Between ground and ground: AC 500 V 1 min

Insulation resistance : AC external terminal all together and ground, DC external terminal collective to ground: 500 MV DC insulation resistance meter 10 MΩ or more

Station type : Remote I / O station

Number of occupied stations : 1 station

Unit power supply Voltage : DC 24 V (ripple ratio within 5%) (allowable voltage range DC 15.6 to 28.8 V)

Current : 70 mA or less (TYP. At 24 VDC)

External wiring connection method : Communication part, Unit power supply part: 7 points 2 piece terminal block (M3.5 screw) I / O power supply part, input / output part: 37 points 2 piece terminal block (M3.5 screw)

External dimensions Height (H) : 65 mm

Width (W) : 197.4 mm

Depth (D) : 46 mm

mass : 0.43 Kg

Operating ambient temperature : 0 to 55 ° C

Storage ambient temperature : -20 to 75 ° C

Ambient operating humidity : 10 to 90% RH, non condensing

Storage ambient humidity : 10 to 90% RH, non condensing

Anti-vibration Meets JIS B 3502, IEC 61131-2 When there is intermittent vibration : Frequency: 5 to 8.4 Hz, One amplitude: 3.5 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 9.8 m / s 2 Sweep count: 10 times in X, Y, Z directions

When there is continuous vibration : Frequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2

Impact resistance : Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)

Use atmosphere : No corrosive gas

Use elevation : 0 to 2000 m

Installation location : In the control panel

Over voltage category : II or less

Pollution degree : 2 or less

Shipping Weight : 1.4 Kg

Estimated Lead Time : In stock. Usually ships in 7-10 working days.

Manufacturer : Mitsubishi Electric

AJ65BTB1-16DT

CC-Link remote I / O unit (DC input / transistor output, terminal block) AJ65BTB1-16DT

Input specification :

Input format : DC input (plus common type)

Number of input points : 8 points

Rated input voltage : DC 24 V (ripple ratio within 5%) (Allowable voltage range DC 19.2 to 28.8 V)

Rated input current : About 7 mA

Maximum number of simultaneous input points : 100%

ON voltage / ON current : 14 V or more / 3.5 mA or more

OFF voltage / OFF current : 6 V or less / 1.7 mA or less

Input resistance : About 3.3 kΩ

Input response time OFF → ON : 10 ms or less

ON → OFF : 10 ms or less

Input common type : 8 points / common (terminal trapezoid 1 wire type)

Input isolation method : Photocoupler isolation

Output format : Transistor output (sink type)

Number of output points : 8 points

Rated load voltage : DC12 / 24V (ripple ratio within 5%)

Used load voltage range : DC 10.2 to 28.8 V

Maximum load current : 0.5 A / 1 point, 4 A / 1 common

Maximum inrush current : 4 A 10 ms or less

Leakage current at OFF : 0.1 mA or less

Maximum voltage drop during ON : DC 0.9 V or less (TYP.) 0.5 A, DC 1.5 V or less (MAX.) 0.5 A

Output response time OFF → ON : 2 ms or less

ON → OFF : 2 ms or less (resistance load)

Surge suppressor : Zener diode

Output section External power supply Voltage : DC 12/24 V (ripple ratio within 5%) (allowable voltage range DC 10.2 to 28.8 V)

Current : 50 mA or less (TYP. DC 24 V, per common) External load current is not included

Output common method : 8 points / common (terminal trapezoid 1 wire type)

Output isolation method : Photocoupler isolation

Withstand voltage : Between DC external terminal and ground: AC 500 V for 1 minute

Insulation resistance : DC external terminal collective to ground: 500 VDC DC insulation resistance meter 10 MΩ or more

Station type : Remote I / O station

Number of occupied stations : 1 station

Unit power supply Voltage : DC 24 V (ripple ratio within 5%) (allowable voltage range DC 15.6 to 28.8 V)

Current : 70 mA or less (TYP. At 24 VDC)

External wiring connection method : Communication part, Unit power supply part: 7 points 2 piece terminal block (M3.5 screw) I / O power supply part, input / output part: 27 points 2 piece terminal block (M3.5 screw)

External dimensions Height (H) : 65 mm

Width (W) : 151.9 mm

Depth (D) : 46 mm

mass : 0.33 Kg

Operating ambient temperature : 0 to 55 ° C

Storage ambient temperature : -20 to 75 ° C

Ambient operating humidity : 10 to 90% RH, non condensing

Storage ambient humidity : 10 to 90% RH, non condensing

Anti-vibration Meets JIS B 3502, IEC 61131-2 When there is intermittent vibration : Frequency: 5 to 8.4 Hz, One amplitude: 3.5 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 9.8 m / s 2 Sweep count: 10 times in X, Y, Z directions

When there is continuous vibration : Frequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2

Impact resistance : Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)

Use atmosphere : No corrosive gas

Use elevation : 0 to 2000 m

Installation location : In the control panel

Over voltage category : II or less

Pollution degree : 2 or less

Shipping Weight : 1.3 Kg

Estimated Lead Time : In stock. Usually ships in 7-10 working days.

Manufacturer : Mitsubishi Electric

AJ65BTB1-16D

CC-Link remote I / O unit (DC input, terminal block) AJ65BTB1-16D

Input format : DC input (plus common / minus common common type)

Number of input points : 16 points

Rated input voltage : DC 24 V (ripple ratio within 5%) (Allowable voltage range DC 19.2 to 28.8 V)

Rated input current : About 7 mA

Maximum number of simultaneous input points : 100%

ON voltage / ON current : 14 V or more / 3.5 mA or more

OFF voltage / OFF current : 6 V or less / 1.7 mA or less

Input resistance : About 3.3 kΩ

Input response time OFF → ON : 10 ms or less

ON → OFF : 10 ms or less

Input common type : 16 points 1 common (terminal trapezoid 1 wire type)

Input isolation method : Photocoupler isolation

Withstand voltage : Between DC external terminal and ground: AC 500 V for 1 minute

Insulation resistance : DC external terminal collective to ground: 500 VDC DC insulation resistance meter 10 MΩ or more

Station type : Remote I / O station

Number of occupied stations : 1 station

Unit power supply Voltage : DC 24 V (ripple ratio within 5%) (allowable voltage range DC 15.6 to 28.8 V)

Current : 60 mA or less (TYP. At 24 VDC)

External wiring connection method : Communication part, Unit power supply part: 7 points 2 piece terminal block (M3.5 screw) I / O power supply part, input / output part: 27 points 2 piece terminal block (M3.5 screw)

External dimensions Height (H) : 65 mm

Width (W) : 151.9 mm

Depth (D) : 46 mm

mass : 0.32 Kg

Operating ambient temperature : 0 to 55 ° C

Storage ambient temperature : -20 to 75 ° C

Ambient operating humidity : 10 to 90% RH, non condensing

Storage ambient humidity : 10 to 90% RH, non condensing

Anti-vibration Meets JIS B 3502, IEC 61131-2 When there is intermittent vibration : Frequency: 5 to 8.4 Hz, One amplitude: 3.5 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 9.8 m / s 2 Sweep count: 10 times in X, Y, Z directions

When there is continuous vibration : Frequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2

Impact resistance : Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)

Use atmosphere : No corrosive gas

Use elevation : 0 to 2000 m

Installation location : In the control panel

Over voltage category : II or less

Pollution degree : 2 or less

Shipping Weight : 1.3 Kg

Estimated Lead Time : In stock. Usually ships in 7-10 working days.

Manufacturer : Mitsubishi Electric

AJ65SBT-RPT

CC-Link repeater (T branch) unit AJ65SBT-RPT

Transmission speed : 156 kbps / 625 kbps / 2.5 Mbps / 5 Mbps / 10 Mbps (selectable)

Maximum number of connected stages : AJ65SBT-RPT only: Combination of 10-stage AJ65SBT-RPT and AJ65SBT-RPS: combination of 4-stage AJ65 SBT-RPT, AJ65 FBTA-RPH, AJ65 BTS-RPH, AJ 65 SBT RPG and AJ 65 BT-RPI: 3 steps

Maximum transmission distance of each segment : Different according to transmission speed

Maximum number of connected units : 64 units

Number of occupied stations : 0 (None)

Station number : No station number

Withstand voltage : Between DC external terminal and ground: AC 500 V for 1 minute

Insulation resistance : DC external terminal collective to ground: 500 VDC DC insulation resistance meter 10 MΩ or more

External wiring connection method : Communication unit, Unit power supply unit: 7 point 2-piece terminal block (M3.5 screw)

Unit power supply Voltage : DC 20.4 to 26.4 V

Current : 60.0 mA (TYP. At 24 VDC)

External dimensions Height (H) : 50 mm

Width (W) : 87.3 mm

Depth (D) : 40 mm

mass : 0.2 Kg

Operating ambient temperature : 0 to 55 ° C

Storage ambient temperature : -20 to 75 ° C

Ambient operating humidity : 10 to 90% RH, non condensing

Storage ambient humidity : 10 to 90% RH, non condensing

Anti-vibration Meets JIS B 3502, IEC 61131-2 When there is intermittent vibration : Frequency: 5 to 8.4 Hz, One amplitude: 3.5 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 9.8 m / s 2 Sweep count: 10 times in X, Y, Z directions

When there is continuous vibration : Frequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2

Impact resistance : Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)

Use atmosphere : No corrosive gas

Use elevation : 0 to 2000 m

Installation location : In the control panel

Over voltage category : II or less

Pollution degree : 2 or less

Shipping Weight : 1.2 Kg