Estimated Lead Time : 2- 8 Weeks

Product Number : EJA210A-EMHA1F4B-97DN/D4/T/M13/T36/N4

Manufacturer : Yokogawa

Model Description : EJA210A Flange-mounted differential pressure transmitter

Output signal
E : 4 to 20 mA DC with digital communication (HART protocol, refer to GS 01C22T01-00EN)

Measurement span (Capsule)
M : 1 to 100 kPa {100 to 10000 mmH2O} {4 to 400 inH2O} {10 to 1000 mbar}

High pressure side (Process flange side) wetted parts material
H :[Diaphragm]: Hastelloy C-276/[Others] : Hastelloy C-2764

Process flange range
A1 : ANSI Class 150

Process flange size/material
F : 3-inch (80 mm) / SUS3165

Low pressure side process connection
4 : with 1/2NPT female process connector

Bolts and nuts material
B : SUS630

Installation
9 : Horizontal impulse piping type, left side high pressure

Electrical connection
7 : 1/2 NPT female, two electrical connections and a blind plug

Integral indicator
D : Digital indicator
N : Always N

Optional codes
D4-Process flange rating : DIN PN25/40

T-Teflon film : Diaphragm protection from sticky process fluid by FEP Teflon film attached with fluorinated oil.
Operation range: 20 to 120?C, 0 to 2 MPa (Not applicable for vacuum service).

M13-Mill Certificate/For model EJA210A
High pressure side: Process flange, Block *14
Low pressure side: Cover flange, Process connector

T36-Pressure test/Leak test Certificate : ANSI/JPI Class 150 3 MPa{29.8 kgf/cm2}

N4-Wired tag plate : Stainless steel tag plate wired onto transmitter

/T : Factory Mutual

FM Explosionproof Approval6, 7, 8
Applicable standard: FM3600, FM3615, FM3810, ANSI/NEMA250
Explosionproof for Class I, Division 1, Groups B, C and D
Dust-ignitionproof for Class II/III, Division 1, Groups E, F and G
Hazardous (classified) locations, indoors and outdoors (NEMA 4X)
Temperature class: T6
Teflon film9
Diaphragm protection from sticky process fluid by FEP Teflon film attached with fluorinated oil.
Operation range: 20 to 120?C, 0 to 2 MPa (Not applicable for vacuum service).

The * marks indicate the most typical selection for each specification. Example: EJA210A-DMWA1A5A-92NN/ .
The # marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use of SUS316 material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for details.

(1) Low pressure side wetted parts material: Cover flange; SCS14A, Process connector; SCS14A, Capsule; SUSF316L, SUS316L or ASTM grade 316L (Diaphragm; Hastelloy C-276 or ASTM
N10276), Vent plug; SUS316 or ASTM grade 316
(2) Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process
fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid
can contaminate the user s process fluids.
Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150?C [302?F] or above).
Contact Yokogawa for detailed information of the wetted parts material.
(3) SUS316 or ASTM grade 316.
(4) Hastelloy C-276 or ASTM N10276.
(5) SUS316 or ASTM grade 316. Forged version may be used.
(6) Applicable for Electrical connection code 2, 7 and C (1/2 NPT female).
(7) Applicable for Output signal code D and E.
For intrinsically safe approval, use the safety barrier certified by the testing laboratories (BARD-400 is not applicable).
(8) Lower limit of ambient temperature is 15?C (5?F) when /HE is specified.
(9) Teflon film can only be specified for model EJA210A.

Shipping Weight : 12 Kg

This product has been replaced with CA150 Multifunction Calibrator (Handheld)

Manufacturer : Yokogawa

Product No. : 2422

Product type : Portable Calibrator

Divided Output: Output = set value?n/m, m (no, of divisions) =15, n=0,1, 2 ... m

Set-Value Memory : 20 steps (10 steps?2, excluding polarity signal)

Auto Step : n/m and memory channel automatic feed, step time-2,5, 10, 20s

Output Monitor : Load current monitor at 1, 10 and 30 V ranges (accuracy

Estimated Lead Time : 6 - 8 weeks.

Manufacturer : Rosemount

Product No. : 3144PD1A1E5B4M5T1Q4

Product type : 3144P Temperature Transmitter

Housing style : D1 = Field mount housing, dual-compartment housing, Aluminum material, 1/2?14-in. NPT Conduit entry size.

Transmitter output : A = 4?20 mA with digital signal based on HART Protocol

Measurement configuration : 1 = Single-sensor input

Product Certificates : E5 = FM Explosion-proof, Dust Ignition-Proof, and Non-incendive approval

Mounting bracket : B4 = ?U? mounting bracket for 2-in. pipe mounting - All SST

Diplay : M5 = LCD display

Transient protector : T1 = Integral transient protector

Calibration certification : Q4 = Calibration certificate (3-point calibration)

Weight : 1.4 Kg

Shipping Weight : 3 Kg

Condition : Brand New

Warranty : 1 Year

Part Number : 436106-2

Manufacturer : Yokogawa

Condition : Brand New

Warranty : 1 Year

Part Number : 436106-3

Manufacturer : Yokogawa

Condition : Brand New

Warranty : 1 Year

Part Number : 437112

Manufacturer : Yokogawa

This product has been replaced with 90056B : TC-K Temperature Probe

Manufacturer : Yokogawa

Product No. : 90056

Product type : TC-K Temperature Probe

-20 to 500?C (Straight)

Shipping Weight : 2 Kg

Estimated Lead Time : 6 - 8 weeks.

Manufacturer : Yokogawa

Product No. :

Estimated Lead Time : 8 - 10 weeks.

Manufacturer : Yokogawa

Product No. : EJA438E-DASCG-910DA-WA12B1SW00-AA27

Product Type : Diaphragm sealed gauge pressure transmitter

Output signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)

Measurement span (capsule) : A = 0.06 to 3.5 MPa (8.6 to 500 psi)

S : Always S

C : Always C

Coverflange bolts and nuts material : G = 316L SST

Installation : 9 = Horizontal piping type and left side high pressure

Amplifier housing : 1 = Cast aluminum alloy

Integral indicator : D = Digital indicator

Mounting bracket : A

Process connection style : W = Flush type

Flange rating : A1 = ANSI class 150

Process connection size (Process flange size) : 2 = 2-inch (50 mm)

Flange material : B = 304 SST

Gasket contact surface : 1 = Serration (for ANSI flange with wetted parts material SW only) Flat (no serration)

Wetted parts material : SW = [Diaphragm] = 316L SST, [Others] = 316L SST

Flushing connection ring : 0 = Ring = None, Vent/Drain plugs = -, Material = -

Extension : 0 = None

Fill fluid : A = Process temperature : For general use (silicone oil), Ambient temperature = ?10 to 250?C ?10 to 60?C

Capillary connection : A = Side of diaphragm seal unit

2 : Always 2

Capillary length : 7 = 7m

Weight : approx. 9.8 Kg

Shipping Weight : 11 Kg

Condition : Brand New

Warranty : 1 Year

Part Number : A1327EF

Manufacturer : Yokogawa

Condition : Brand New

Warranty : 1 Year

Part Number : AAI135-H50/13S00

Manufacturer : Yokogawa

Condition : Brand New

Warranty : 1 Year

Part Number : AAI135-H53/K4A00

Manufacturer : Yokogawa

Condition : Brand New

Warranty : 1 Year

Part Number : AAI135-S50/13S00

Manufacturer : Yokogawa

This product has been replaced with AAI141-H50/K4A00 AAI141 Analog Input Module

Manufacturer : Yokogawa

Product No. : AAI141-H00/K4A00

Product type : AAI141 Analog Input Module

Weight : 1.5 Kg

Condition : Brand New

Warranty : 1 Year

Part Number : AAI141-S00/K4A00

Manufacturer : Yokogawa

Condition : Brand New

Warranty : 1 Year

Part Number :AAI143-S00

Manufacturer : Yokogawa

Condition : Brand New

Warranty : 1 Year

Part Number :AAI143-S50

Manufacturer : Yokogawa

Condition : Brand New

Warranty : 1 Year

Part Number : AAI543-H00/K4A00

Manufacturer : Yokogawa