This product has been replaced with 90056B : TC-K Temperature Probe

Manufacturer : Yokogawa

Product No. : 90056

Product type : TC-K Temperature Probe

-20 to 500?C (Straight)

Shipping Weight : 2 Kg

Estimated Lead Time : 6 - 8 weeks.

Manufacturer : Yokogawa

Product No. :

Estimated Lead Time : 6 - 8 weeks.

Manufacturer : Yokogawa

Product No. : DYC-1-05

Product type : Signal Cable

DYC : Signal Cable

Cable End : 1 = With End finish

Cable Length : 05 = 5 m

Shipping weight : 2 Kg

This product has been replaced with EJA110E-DMS4J-912NB/D44 Differential Pressure Transmitter

Manufacturer : Yokogawa

Product No. : EJA110A-DMS4A-92NA/D4

Product Type : Differential Pressure Transmitter

Output Signa : D = 4 to 20 mA DC with digital communication (BRAIN protocol)

Measurement span(capsule) : M = 1 to 100 kPa {100 to 10000 mmH2O} {4 to 400 inH2O} {10 to 1000 mbar}

Wetted parts material : S

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts material : A = SCM435 16 MPa {160 kgf/cm2}*9

Installation : 9 = Horizontal impulse piping type, left side high pressure

Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plug

Integral indicator : N = None

Mounting bracket : A = SECC Carbon steel 2-inch pipe mounting (flat type)

Calibration units : D4 = M calibration (kgf/cm2 unit)

Weight : 3.9 Kg

Shipping Weight : 5 Kg

Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJA110A-DMS4B-92DB/FF1/D4/ M11/T12

Product Type : Differential Pressure Transmitter

Output Signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)

Measurement span(capsule) : M = 1 to 100 kPa {100 to 10000 mmH2O} {4 to 400 inH2O} {10 to 1000 mbar}

Wetted parts material : S = Body : SCS14A, Capsule : SUS316L, Vent plug : SUS316

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts material : B = SUS630, Maximum working pressure : 16 MPa {160 kgf/cm2}

Installation : 9 = Horizontal impulse piping type, left side high pressure

Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plug

Integral indicator : D = Digital indicator

Mounting bracket : B = SUS304, 2-inch pipe mounting (flat type)

Factory Mutual (FM) : FF1

Calibration units : D4 = M calibration (kgf/cm2 unit)

Mill Certificate : M11 = Cover flange, Process connector

Pressure test/Leak test Certificate : T12 = Test Pressure: 16 MPa{160 kgf/cm2}

Weight : 3.9 Kg

Shipping Weight : 5 Kg

This product has been replaced with EJA110E-DMS4G-912DB/FF1/D4/M11/T12

Manufacturer : Yokogawa

Product No. : EJA110A-DMS4B-92DB/FF1/D4/M11/T12

Product Type : Differential Pressure Transmitter

Output Signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)

Measurement span(capsule) : M = 1 to 100 kPa {100 to 10000 mmH2O} {4 to 400 inH2O} {10 to 1000 mbar}

Wetted parts material : S

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts materiaL : B = SUS630, Maximum working pressure : 16 MPa {160 kgf/cm2}*9

Installation : 9 = Horizontal impulse piping type, left side high pressure

Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plug

Integral indicator : D = Digital indicator

Mounting bracket : B = SUS304 2-inch pipe mounting (flat type)

Factory Mutual (FM) : FF1 =

Calibration units : D4 = M calibration (kgf/cm2 unit)

Mill Certificate : M11 = Cover flange, Process connector

Pressure test/Leak test Certificate : T12 = Test Pressure: 16 MPa{160 kgf/cm2}

Weight : 3.9 Kg

Shipping Weight : 5 Kg

Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJA110A-FMS4B-22DD/KF25

Product Type : Differential Pressure Transmitter

Output Signal : F = Digital communication (FOUNDATION Fieldbus protocol, refer to GS 01C22T02-00E)

Measurement span(capsule) : M = 1 to 100 kPa {100 to 10000 mmH2O} {4 to 400 inH2O} {10 to 1000 mbar}

Wetted parts material : S

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts materiaL : B = SUS630, Maximum working pressure : 16 MPa {160 kgf/cm2}*9

Installation : 2 = Vertical impulse piping type, right side high pressure, process connector upside

Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plug

Integral indicator : D = Digital indicator

Mounting bracket : D = SUS304, 2-inch pipe mounting (L type)

Weight : 3.9 Kg

Shipping Weight : 5 Kg

Estimated Lead Time : 8 - 10 weeks.

Manufacturer : Yokogawa

Product No. : EJA110E-DHS4G-717DD/FF1/X2/C1/D3/T12

Product Type : Differential pressure transmitters

This product is a replacement for EJA110A-DHS4B-37DC/FF1/X1/C1/D3/T12 Differential pressure transmitters

Performance Specifications : Zero-based calibrated span, linear output, wetted parts material code ?S? and silicone oil unless otherwise mentioned

Overpressure condition: up to maximum working pressure M, H and V capsules, except for gold-plated diaphragm.

Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJA110E-DMS4B-917DB/FF1/A/D4/M11/T12/HE

Product Type : Differential Pressure Transmitter

Output Signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)

Measurement span(capsule) : M = 1 to 100 kPa (4 to 400 inH2O)

Wetted parts material : S

• Cover flange and process connector : ASTM CF-8M

• Capsule : Hastelloy C-276 *2 (Diaphragm), F316L SST, 316L SST (Others)

• Capsule gasket : Teflon-coated 316L SST

• Vent/Drain plug : 316 SST

Process connections : 4 = with 1/2 NPT female process connector

Installation : 9 = Horizontal piping and left side high pressure

Amplifier housing : 1 = Cast aluminum alloy

Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug

Integral indicator : D = Digital indicator

Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

Factory Mutual (FM) : FF1

• FM Explosionproof Approval

• Applicable standard: FM3600, FM3615, FM3810, ANSI/NEMA250

• Explosionproof for Class I, Division 1, Groups B, C and D,

• Dust-ignitionproof for Class II/III, Division 1, Groups E, F and G,

• in Hazardous locations, indoors and outdoors (Enclosure: Type 4X)

• ?FACTORY SEALED, CONDUIT SEAL NOT REQUIRED.?

• Temperature class: T6, Amb. Temp.: ?40 to 60?C (?40 to 140?F)

Lightning protector : A = Transmitter power supply voltage: 10.5 to 32 V DC (10.5 to 30 V DC for intrinsically safe type.) Allowable current: Max. 6000 A (1?40

Estimated Lead Time : 8 - 10 weeks.

Manufacturer : Yokogawa

Product No. : EJA110E-DMS4G-912DB/FF1/D4/M11/T12

Product Type : Differential Pressure Transmitter

This product is a replacement for EJA110A-DMS4B-92DB/FF1/D4/M11/T12 Differential Pressure Transmitter

Output signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)

Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)

Wetted parts material : S

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts materia : G = 316L SST

Installation : 9 = Horizontal piping and left side high pressure

Amplifier housing : 1 = Cast aluminum alloy

Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

Integral indicator : D = Digital indicator

Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

Factory Mutual (FM) : FF1

Calibration units : D4 = M calibration (kgf/cm2 unit)

Material certificate : M11 = Cover flange, Process connector

Pressure test/Leak test certificate : T12 = Test Pressure: 16 MPa(2300 psi)

Weight : 2.8 Kg

Shipping Weight : 4 Kg

Estimated Lead Time : 3 - 4 weeks.

Manufacturer : Yokogawa

Product No. : EJA110E-JMS4G-712DD/NF11/D4

Product Type : Differential Pressure Transmitter

Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)

Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts material : G = 316L SST

Installation : 7 = Vertical piping, left side high pressure, and process connection downside

Amplifier housing : 1 = Cast aluminum alloy

Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

Integral indicator : D = Digital indicator)

Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)

NF11

Calibration units : D4 = M calibration (kgf/cm2 unit)

Weight : 2.8 Kg

Shipping Weight : 4 Kg

Estimated Lead Time : 3 - 4 weeks.

Manufacturer : Yokogawa

Product No. : EJA110E-JMS4G-712EK/NS11/D4/X2

Product Type : Differential Pressure Transmitter

Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)

Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts material : G = 316L SST

Installation : 7 = Vertical piping, left side high pressure, and process connection downside

Amplifier housing : 1 = Cast aluminum alloy

Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

Integral indicator : E = Digital indicator with the range setting switch (push button)

Mounting bracket : K = 3316 SST or SCS14A 2-inch pipe mounting, L type (for vertical piping)

NS11

Calibration units : D4 = M calibration (kgf/cm2 unit)

Painting ( Coating change) : X2 = Anti-corrosion coating

Weight : 2.8 Kg

Shipping Weight : 4 Kg

Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJA110E-JMS4G-912EJ/KU22

Product Type : Differential Pressure Transmitter

Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)

Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts material : G = 316L SST

Installation : 9 = Horizontal piping and left side high pressure

Amplifier housing : 1 = Cast aluminum alloy

Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

Integral indicator : E = Digital indicator with the range setting switch (push button)

Mounting bracket : J = 316 SST 2-inch pipe mounting, flat type (for horizontal piping)

ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic *1 *3
[ATEX Intrinsically safe Ex ic]
Applicable Standard: EN 60079-0:2012, EN 60079-11:2012
II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?30 to 60?C (?22 to 140?F) *2
Ui=30 V, Ci=27.6 nF, Li=0

Estimated Lead Time : 3 - 4 weeks.

Manufacturer : Yokogawa

Product No. : EJA110E-JMS4G-917DB/NS11

Product Type : Differential Pressure Transmitter

Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)

Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts material : G = 316L SST

Installation : 9 = Horizontal piping and left side high pressure

Amplifier housing : 1 = Cast aluminum alloy

Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug*

Integral indicator : D = Digital indicator

Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

NS11

Weight : 2.8 Kg

Shipping Weight : 4 Kg

Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJA110E-JMS4J-912NA

Product type : EJA110E Differential pressure transmitter

Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)

Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts material : J = B7 carbon steel

Installation : 9 = Horizontal piping and left side high pressure

Amplifier housing : 1 = Cast aluminum alloy

Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

Integral indicator : N = None

Weight : 4.5 Kg

Shipping Weight : 8 Kg

Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJA110E-JVS5G-92CEJ/KU22

Product Type : Differential Pressure Transmitter

Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

Measurement span (capsule) : V = 0.14 to 14 MPa (20 to 2000 psi)

Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.

Process connections : 5 = without process connector (1/4 NPT female on the cover flanges)

Bolts and nuts material : G = 316L SST

Installation : 9 = Horizontal piping and left side high pressure

Amplifier housing : 2 = ASTM CF-8M stainless steel

Electrical connection : C = 1/2 NPT female, two electrical connections and a SUS316 blind plug

Integral indicator : E = Digital indicator with the range setting switch (push button)

Mounting bracket : J = 316 SST 2-inch pipe mounting, flat type (for horizontal piping)

ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic *1 *3
[ATEX Intrinsically safe Ex ic]
Applicable Standard: EN 60079-0:2012, EN 60079-11:2012
II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?30 to 60?C (?22 to 140?F) *2
Ui=30 V, Ci=27.6 nF, Li=0

Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJA118W-EMSA2AA-AA05-92DJ/FF1/D4

Product Type : Diaphragm Sealed Differential Pressure Transmitter (Flush Diaphragm Type)

Output Signal : E = 4 to 20 mA DC with digital communication (HART protoco)

Measurement span (capsule) : M = 2.5 to 100 kPa {250 to 10000 mmH2O}{10 to 400 inH2O}{25 to 1000 mbar}

Wetted parts material : S

Process flange rating : A2 = ANSI Class 300

Cover flange bolts material : A = JIS SCM435

Fill fluid : A

A : Always A

Capillary length (m) : 05 = 5m

Installation : 9 = Horizontal impulse piping type, left side high pressure

Integral indicator : 2 = 1/2 NPT female, two electrical connections without blind plug

Integral indicator : D = Digital indicator

Mounting bracket : J = JIS SUS316 2-inch pipe mounting (flat type)

Factory Mutual (fm) : FF1 = FM Explosionproof Approval *1 *3 *4
Applicable standard: FM3600, FM3615, FM3810, ANSI/NEMA250
Explosionproof for Class I, Division 1, Groups B, C and D
Dust-ignitionproof for Class II/III, Division 1, Groups E, F and G
Hazardous (classified) locations, indoors and outdoors (NEMA 4X)
Division 2, ?SEALS NOT REQUIRED?,
Temp. Class: T6
Amb. Temp.: ?40 to 60?C (?40 to 140?F)

Calibration units : D4 = M calibration (kgf/cm2 unit)

Weight : 17.3 Kg

Shipping Weight : 19 Kg

Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJA120A-DES4B-92EA/FS1/D4

Product Type : Differential Pressure Transmitter

Output Signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)

Measurement span (capsule) : E = 0.1 to 1 kPa {10 to 100 mmH2O}

Wetted parts material : S

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts material : B = SUS630, [Maximum working pressure] : 50 kPa {0.5 kgf/cm2}

Installation : 9 = Horizontal impulse piping type, left side high pressure

Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plug

Integral indicator : E = Digital indicator with the range setting switch

Mounting bracket : A = SECC Carbon steel, 2-inch pipe mounting (flat type)

Factory Mutual (FM) : FS1

FM Intrinsically safe Approval
Intrinsically Safe for Class I, Division 1, Groups A, B, C & D, Class II, Division 1,
Groups E, F & G and Class III, Division 1 Hazardous Locations.
Nonincendive for Class I, Division 2, Groups A, B, C & D, Class II, Division. 2,
Groups E, F & G, and Class III, Division 1 Hazardous Locations.
Enclosure: ?NEMA 4X?, Temp. Class: T4, Amb. Temp.: ?40 to 60C (?40 to 140F)
Intrinsically Safe Apparatus Parameters
[Groups A, B, C, D, E, F and G] : Vmax=30 V, Imax=165 mA, Pmax=0.9 W, Ci=22.5 nF, Li=730 H
[Groups C, D, E, F and G] : Vmax=30 V, Imax=225 mA, Pmax=0.9 W, Ci=22.5 nF, Li=730 H

Calibration units : D4 = M calibration (kgf/cm2 unit )

Weight : 3.9 Kg

Shipping Weight : 5 Kg

Estimated Lead Time : 8 - 10 weeks.

Manufacturer : Yokogawa

Product No. : EJA120E-DES4G-912EB/FS1/D4/M11/T04

Product Type : Differential Pressure Transmitter

Output Signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)

Measurement span (capsule) : E = 0.1 to 1 kPa (0.4 to 4 inH2O)

Wetted parts material : S

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts material : G = 316L SST

Installation : 9 = Horizontal piping and left side high pressure

Amplifier housing : 1 = Cast aluminum alloy

Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

Integral indicator : E = Digital indicator with the range setting switch (push button)

Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

Factory Mutual (FM) : FS1

FM Intrinsically safe Approval
Applicable Standard: FM 3600, FM 3610, FM 3611, FM 3810, ANSI/ISA-60079-0, ANSI/ISA-60079-11,ANSI/ISA-61010-1, NEMA 250
Intrinsically Safe for Class I, Division 1, Groups A, B, C & D, Class II, Division 1,
Groups E, F & G and Class III, Division 1, Class I, Zone 0, in Hazardous Locations, AEx ia IIC
Nonincendive for Class I, Division 2, Groups A, B, C & D, Class II, Division. 2,
Groups F & G, Class I, Zone 2, Group IIC, in Hazardous Locations
Enclosure: Type 4X, Temp. Class: T4, Amb. Temp.: ?60 to 60?C (?75 to 140?F)
Intrinsically Safe Apparatus Parameters
[Groups A, B, C, D, E, F and G] Vmax=30 V, Imax=200 mA, Pmax=1 W, Ci=6 nF, Li=0

Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJA210A-EHHD2D4A-97DN/T

Product Type : Flange-mounted Differential Pressure Transmitter

Output Signal : E = 4 to 20 mA DC with digital communication (HART protocol, refer to GS 01C22T01-00E)

Measurement span (capsule) : H = 5 to 500 kPa {0.05 to 5 kgf/cm2} {20 to 2000 inH2O} {50 to 5000 mbar}

High pressure side (Process flange side) wetted parts material : H = Diaphragm : Hastelloy C-276*4 , Others : Hastelloy C-276*4

Process flange rating : D2 = DIN PN10/16

Process flange size / material : D = 3-inch (80 mm) / S25C

Low pressure side process connection : 4 = with 1/2NPT female process connector

Bolts and nuts material : A = SCM435

Installation : 9 = Horizontal impulse piping type, left side high pressure

Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug

Integral indicator : D = Digital indicator

N : Always N

Optional codes : T

Weight : 10.7 Kg

Shipping Weight : 12 Kg

Estimated Lead Time : 8 - 10 weeks.

Manufacturer : Yokogawa

Product No. : EJA210E-JMS2J-917DN-WJ13B2SW00-B

Product Type : Flange Mounted Differential Pressure Transmitter

Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

Measurement span (capsule) : M = 1 to 100kPa (4 to 400 inH2O)

Low pressure side wetted parts material : S

Low pressure side Process connections : 2 = with Rc 1/2 female process connector

Coverflange bolts and nuts material : J = B7 carbon stee

Installation : 9 = Horizontal piping type and left side high pressure

Amplifier housing : 1 = Cast aluminum alloy

Electrical connection : 7 = 1/2 NPT female, two electrical connections with a blind plug

Integral indicator : D = Digital indicator

N : Always N

Transmitter body section

Process connection style : W = Flush type

Flange rating : J1 = JIS 10K

Flange size : 3 = 3-inch (80mm)

Flange material : B = 304 SST

Gasket contact surface : 2 = Flat (no serration)

Wetted parts material (high pressure side) : SW

Flushing connection ring : 0

Extension : 0 = None

Fill fluid : B

Weight : 8.3 Kg

Shipping Weight : 9.5 Kg

Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJA310A-FAS4B-X2DD

Product Type : Absolute Pressure Transmitters

Output Signal : F = Digital communication (FOUNDATION Fieldbus protocol,

Measurement span (capsule) : A = 0.03 to 3 MPa {0.3 to 30 kgf/cm2}

Wetted parts material : S

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts materia : B

X

Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plug

Integral indicator : D = Digital indicator

Mounting bracket : D = SUS304 or SCS13A, 2-inch pipe mounting (L type)

Weight : 3.9 Kg

Shipping Weight : 5 Kg

Estimated Lead Time : 8 - 10 weeks.

Manufacturer : Yokogawa

Product No. : EJA430E-JBS4G-912EB/KF22/A/D1/M11/T12

Product Type : Gauge pressure transmitter

Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

Measurement span (capsule) : B = 0.14 to 16 MPa (20 to 2300 psi)

Wetted parts material : S

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts material : G = 316L SST

Installation : 9 = Horizontal piping and left side high pressure

Amplifier housing : 1 = Cast aluminum alloy

Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

Integral indicator : E = Digital indicator with the range setting switch (push button)

Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

ATEX : KF22 = ATEX Flameproof Approval
Applicable Standard: EN 60079-0:2012/A11:2013, EN 60079-1:2007, EN 60079-31:2009
Certificate: KEMA 07ATEX0109 X
II 2G, 2D Ex d IIC T6...T4 Gb, Ex tb IIIC T85?C Db
Degree of protection: IP66/IP67
Amb. Temp. (Tamb) for gas-proof :
T4; ?50 to 75?C (?58 to 167?F), T5; ?50 to 80?C (?58 to 176?F), T6; ?50 to 75?C (?58 to 167?F)
Process Temp. for gas-proof (Tp):
T4; ?50 to 120?C (?58 to 248?F), T5; ?50 to 100?C (?58 to 212?F), T6; ?50 to 85?C (?58 to 185?F)
Max. surface Temp. for dust-proof: T85?C (Tamb: ?30 to 75?C, Tp: ?30 to 85?C)

Lightning protector : A = Transmitter power supply voltage: 10.5 to 32 V DC ( 10.5 to 30 V DC for intrinsically safe type, 9 to 32 V DC for Fieldbus communication type.) Allowable current: Max. 6000 A ( 1?40

Estimated Lead Time : 8 - 10 weeks.

Manufacturer : Yokogawa

Product No. : EJA530E-JCS7N-017EN/CS1/N4

Product Type : Gauge pressure transmitter

Output signal : J = 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

Measurement span (capsule) : C = 0.5 to 10 MPa (72.5 to 1450 psi)

Wetted parts material : S

Process connections : 7 = 1/2 NPT male

N : Always N

0 : Always 0

Amplifier housing : 1 = Cast aluminum alloy

Electrical connection : 7 = 1/2 NPT female, two electrical connections with a blind plug

Integral indicator : E = Digital indicator with the range setting switch (push button)

Mounting bracket : N = None

Canadian Standards Association (CSA) : CSI = CSA Intrinsically safe Approval

Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJX110A-EMS4G-912EB/KU21

Product Type : Differential Pressure Transmitter

Output signal : E = 4 to 20 mA DC with digital communication (HART 5 protocol)

Measurement span (capsule) : M = 0.5 to 100 kPa (2 to 400 inH2O)

Wetted parts material : S = Cover flange and process connector ASTM CF-8M *1, Capsule Hastelloy C-276 *2 (Diaphragm)F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts material : G = 316L SST

Installation : 9 = Horizontal piping and left side high pressure

Amplifier housing : 1 = Cast aluminum alloy

Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

Integral indicator : E = Digital indicator with the range setting switch (push button)

Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

Weight : 2.8 Kg

Shipping Weight : 5 Kg

Estimated Lead Time : 8 - 10 weeks.

Manufacturer : Yokogawa

Product No. : FX1004-4-3-H/C3/C7/F1/M1

Product Type : FX1000 Paperless Recorder

FX1004 : 4ch, Shortest measurement interval: 125ms

External storage medium slot : 4 = With CF card slot and medium (512MB)

3

Withstanding voltage between measuring input terminals : H = 1000 VAC(50/60 Hz), 1 min

Options

Dimensions ( D x W x H ) : 16.17 cm x 18.37 cm x 16.17 cm

Weight : 1.30 Kg (not including options)

Shipping Weight : 2.50 Kg

Estimated Lead Time : 10 - 12 weeks.

Manufacturer : Yokogawa

Product No. : GCRV-GBARS78N2373/B036

Product Type : Rotary Valve

Bellows material : G = Rubber

O-Ring materia : B = Viton

Valve material : A = Gas sampling

Sheet material : R = Rulon

Grand materia : S = SUS316

Sample volume of B side : 7 = Gas sample : 50

Estimated Lead Time : 10 - 12 weeks.

Manufacturer : Yokogawa

Product No. : GCRV-GBARS88N0151/A080/B036

Product Type : Rotary Valve

Bellows material : G = Rubber

O-Ring materia : B = Viton

Valve material : A = Gas sampling

Sheet material : R = Rulon

Grand materia : S = SUS316

Sample volume of B side : 8 = Gas sample: more than 100

Estimated Lead Time : 10 - 12 weeks.

Manufacturer : Yokogawa

Product No. : GCRV-GBARS88N2373/A020/B036

Product Type : Rotary Valve

Bellows material : G = Rubber

O-Ring materia : B = Viton

Valve material : A = Gas sampling

Sheet material : R = Rulon

Grand materia : S = SUS316

Sample volume of B side : 8 = Gas sample: more than 100

Estimated Lead Time : 10 - 12 weeks.

Manufacturer : Yokogawa

Product No. : GCRV-GBARS88N2373/A040/B036

Product Type : Rotary Valve

Bellows material : G = Rubber

O-Ring materia : B = Viton

Valve material : A = Gas sampling

Sheet material : R = Rulon

Grand materia : S = SUS316

Sample volume of B side : 8 = Gas sample: more than 100

Estimated Lead Time : 10 - 12 weeks.

Manufacturer : Yokogawa

Product No. : GCRV-GBARS88N2373/A080/B036

Product Type : Rotary Valve

Bellows material : G = Rubber

O-Ring materia : B = Viton

Valve material : A = Gas sampling

Sheet material : R = Rulon

Grand materia : S = SUS316

Sample volume of B side : 8 = Gas sample: more than 100

Estimated Lead Time : 10 - 12 weeks.

Manufacturer : Yokogawa

Product No. : GCRV-GBARS88N2935/A660/B036

Product Type : Rotary Valve

Bellows material : G = Rubber

O-Ring materia : B = Viton

Valve material : A = Gas sampling

Sheet material : R = Rulon

Grand materia : S = SUS316

Sample volume of B side : 8 = Gas sample: more than 100

Estimated Lead Time : 8 - 10 weeks

Manufacturer : Yokogawa

Product No. : GCRV-GBCRCCN0711

Product Type : Yokogawa Rotary Valve

G :

B :

C :

R :

C :

N :

Shipping Weight : 5 Kg

Estimated Lead Time : 10 - 12 weeks.

Manufacturer : Yokogawa

Product No. : GCRV-GBCRSCNN190

Product Type : Rotary Valve

Bellows material : G = Rubber

O-Ring materia : B = Viton

Valve material : C = Back flash & column switching

Sheet material : R = Rulon

Grand material : S = SUS316

Sample volume of B side : C = Switching valve

Sample volume of A side : N = Not Provided

Purge/Suction Yes/No : N = Not Provided

Shipping Weight : 250 Kg

Estimated Lead Time : 10 - 12 weeks.

Manufacturer : Yokogawa

Product No. : GCRV-GBCRSCNN4100

Product Type : Rotary Valve

Bellows material : G = Rubber

O-Ring materia : B = Viton

Valve material : C = Back flash & column switching

Sheet material : R = Rulon

Grand materia : S = SUS316

Sample volume of B side : C = Switching valve

Sample volume of A side : N = Not Provided

Purge/Suction Yes/No : N = Not Provided

Shipping Weight : 250 Kg