For non-Malaysian customers are required to make purchase from NEX Instrument Inc website at
Yokogawa
Sort by
Show result
  • Estimated Lead Time : 6 - 8 weeks.

  • Manufacturer : Rosemount

  • Product No. : 3144PD1A1E5B4M5T1Q4

  • Product type : 3144P Temperature Transmitter

  • Housing style : D1 = Field mount housing, dual-compartment housing, Aluminum material, 1/2?14-in. NPT Conduit entry size.

  • Transmitter output : A = 4?20 mA with digital signal based on HART Protocol

  • Measurement configuration : 1 = Single-sensor input

  • Product Certificates : E5 = FM Explosion-proof, Dust Ignition-Proof, and Non-incendive approval

  • Mounting bracket : B4 = ?U? mounting bracket for 2-in. pipe mounting - All SST

  • Diplay : M5 = LCD display

  • Transient protector : T1 = Integral transient protector

  • Calibration certification : Q4 = Calibration certificate (3-point calibration)

  • Weight : 1.4 Kg

  • Shipping Weight : 3 Kg

RM6,904.60
  • Estimated Lead Time : 10 - 12 weeks.
  • Manufacturer : Yokogawa
  • Product No. : AMM42T
  • Product type : 2-wire Transmitter Input Multiplexer Module
  • Input signal : -4 to 20 mA DC
  • Allowable input voltage : 40 mA or less
  • Transmitter power supply : 23.5 to 24.5 V DC (output power limit: 60 mA or less)
  • Input resistance : 250 O (can be changed to 70 O when connected to barrier)
  • Signal isolation : No isolation between system and field, and between channels
  • Data update period : 1 second/li>
  • Current consumption : 4 A or less (5.0 V DC)
  • Shipping weight : 1 Kg
RM10,836.00
  • Estimated Lead Time : 8 - 10 weeks.
  • Manufacturer : Yokogawa
  • Product No. : CV5P-0NE3L
  • Product type : Five Valve Group
  • CV Valve Block,three valve and cylindrical shut-off valves
  • Flat five-valve
  • Shipping weight : 7Kg
RM1,978.00
  • Estimated Lead Time : 2 - 4 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110A-DHS4B-32DC/FF1/X1/D3/C1/T02

  • Product Type : Differential Pressure Transmitter

  • Output Signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)

  • Measurement span(capsule) : M = 1 to 100 kPa {100 to 10000 mmH2O} {4 to 400 inH2O} {10 to 1000 mbar}

  • Wetted parts material : S

    • Body : SCS14A

    • Capsule : SUS316L

    • Vent plug : SUS316

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts materiaL : B = SUS630, Maximum working pressure : 16 MPa {160 kgf/cm2}*9

  • Installation : 3 = Vertical impulse piping type, right side high pressure, process connector downside

  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plug

  • Integral indicator : D = Digital indicator

  • Mounting bracket : C = SECC Carbon steel 2-inch pipe mounting (L type)

  • Factory Mutual (FM) : FF1 =

    • FM Explosionproof Approval *1 *3 *4

    • Applicable standard: FM3600, FM3615, FM3810, ANSI/NEMA250

    • Explosionproof for Class I, Division 1, Groups B, C and D

    • Dust-ignitionproof for Class II/III, Division 1, Groups E, F and G

    • Hazardous (classified) locations, indoors and outdoors (NEMA 4X)

    • Temperature class: T6

    • Amb. Temp.: ?40 to 60C (?40 to 140F)

  • Painting Coating change : X1 = Epoxy resin-baked coating

  • Calibration units : D3 = bar calibration (bar unit)

  • Failure alarm down-scale : C1 = Output status at CPU failure and hardware error is ?5%, 3.2 mA or less.

  • T02

  • Shipping Weight : 8 Kg

RM3,164.00
  • This product has been replaced with EJA110E-DHS4G-717DD/FF1/X2/C1/D3/T12 Differential pressure transmitters

  • Manufacturer : Yokogawa

  • Product No. : EJA110A-DHS4B-37DC/FF1/X1/C1/D3/T12

  • Product Type : Differential pressure transmitters

  • Performance Specifications : Zero-based calibrated span, linear output, wetted parts material code ?S? and silicone oil.

  • Overpressure Effects (M, H and V capsules) : 0.03 % of URL per 16 MPa {2300 psi}

  • Stability : 0.1 % of URL per 60 months (M, H and V capsules), 0.2 % of URL per 12 months (L capsule)

  • Power Supply Effects : 0.005 % per Volt (from 21.6 to 32 V DC, 350 )

  • Zero Adjustment Limits : Zero can be fully elevated or suppressed, within the Lower and Upper Range Limits of the capsule.

  • External Zero Adjustment : External zero is continuously adjustable with 0.01 % incremental resolution of span. Span may be adjusted locally using the digital indicator with range switch.

  • Mounting Position Effect : Rotation in diaphragm plane has no effect. Tilting up to 90 ? will cause zero shift up to 0.4 kPa {1.6 inH2 O} which can be corrected by the zero adjustment.

  • Shipping Weight : 5 Kg

RM4,334.00
  • Estimated Lead Time : 4 - 6 weeks

  • Manufacturer : Yokogawa

  • Model : EJA110A

  • Zero-based calibrated span

  • Linear output

  • Wetted parts material code ‘S’

  • Silicone oil

  • Stability : 0.1 % of URL per 60 months

  • Power Supply Effects : 0.005 % per Volt (from 21.6 to 32 V DC, 350 )

  • Zero Adjustment Limits : Zero can be fully elevated or suppressed, within the Lower and Upper Range Limits of the capsule.

  • External Zero Adjustment : External zero is continuously adjustable with 0.01 % incremental resolution of span. Span may be adjusted locally using the digital indicator with range switch.

  • Mounting Position Effect : Rotation in diaphragm plane has no effect. Tilting up to 90 will cause zero shift up to 0.4 kPa {1.6 inH2 O} which can be corrected by the zero adjustment.

  • Supply Voltage : 10.5 to 42 V DC for general use and flameproof type. 10.5 to 32 V DC for lightning protector (Optional code /A). 10.5 to 30 V DC for intrinsically safe, Type n, nonincendive, or non-sparking type. Minimum voltage limited at 16.4 V DC for digital communications, BRAIN and HART

  • Ambient Humidity Limits : 5 to 100 % RH @ 40 C (104 F)

  • Process Temperature Limits : -40 to 120 C (-40 to 248 F)

  • Dimensions (HxWxD), approx : 12.5 cm X 11 cm X 19.7 cm

  • Weight : 3.9 kg (8.6 lbs.) without integral indicator, mounting bracket, and process connector.

  • Shipping Weight : 8 Kg

RM5,009.40
  • Estimated Lead Time : 2 - 4 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110A-ELS4A-22DC/Z

  • Product type : EJA110A Differential Pressure Transmitter

  • E - Output signal : 4 to 20 mA DC with digital communication (HART protocol, see IM 01C22T01-01E)

  • L - 0.5 to 10 kPa {50 to 1000 mmH2O}

  • S - Wetted part material :  Body SCS14A, Capsule SUS316L, Vent plug SUS316

  • 4 - Process connection : with 1/2 NPT female process connector

  • A - bolt and nuts material : SCM435, 16 MPa {160 kgf/cm2}

  • 2 - Installation : Vertical impulse piping type, right side high pressure, process connector upside

  • 2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plug

  • D - Integral Indicator : Digital indicator

  • C - Mounting bracket : SECC Carbon steel, 2-inch pipe mounting (L type)

  • Ambient Temperature Limits: ?40 to 85?C (?40 to 185?F), ?30 to 80?C (?22 to 176?F) with LCD Display

  • Process Temperature Limits: ?40 to 120?C (?40 to 248?F)

  • Weight : 3.9 Kg

  • Shipping weight : 6 Kg

RM4,287.20
  • Manufacturer : Yokogawa
  • Product No. : EJA110A-EMS4B-67DD/T12
  • Product type : Differential Pressure Transmitter
  • Output Signal : E = 4 to 20 mA DC with digital communication (HART protocol, refer to GS 01C22T01-00E)
  • Measurement span(capsule) : M = 1 to 100 kPa {100 to 10000 mmH2O} {4 to 400 inH2O} {10 to 1000 mbar}
  • Wetted parts material*11 : S = [Body]*2 SCS14A, [Capsule] SUS316L*5, [Vent plug] SUS316*13
  • Process connections : 4 = With 1/2 NPT female process connector
  • Bolts and nuts material : B = [Maximum working pressure] SUS630 16 MPa {160 kgf/cm2}*9
  • Installation : 6 = Vertical impulse piping type, left side high pressure, process connector upside
  • Electrical connection : 7 = /2 NPT female, two electrical connections and a blind plug
  • Integral indicator : D = Digital indicator
  • Mounting bracket : D = SUS304, 2-inch pipe mounting (L type)
  • Pressure test/ Leak test Certificate : T12 = Test Pressure: 16 MPa{160 kgf/cm2},Nitrogen(N2) Gas, Retention time: 10 minutes
  • Weight : 3.9 kG
  • Shipping Weight : 5 Kg
RM4,305.60
  • Manufacturer : Yokogawa
  • Product No. : EJA110A-EMS4B-92DB/FF1/X1/A/D4
  • Product type : Differential Pressure Transmitter
  • Output signal : E = 4 to 20 mA DC with digital communication (HART protocol, refer to GS 01C22T01-00E)
  • Measurement span (capsule) : M =1 to 100 kPa {100 to 10000 mmH2O} {4 to 400 inH2O} {10 to 1000 mbar}
  • Wetted parts material : S = [Body] SCS14A,[Capsule] SUS316L, [Vent plug] SUS316
  • Process connections : 4 = With 1/2 NPT female process connector
  • Bolts and nuts material : B = SUS630 16 MPa {160 kgf/cm2}
  • Installation : 9 = Horizontal impulse piping type, left side high pressure
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plug
  • Integral indicator : D = Digital indicator
  • Mounting bracket : B = SUS304 2-inch pipe mounting (flat type)
  • Shipping weight : 5Kg
RM4,107.80
  • Estimated Lead Time : 2 - 4 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110A-EMS4B-92EA/CF1/D1
  • Product type : Differential Pressure Transmitter
  • Output Signal : E = 4 to 20 mA DC with digital communication (HART protocol, refer to GS 01C22T01-00E)
  • Measurement span(capsule) : M = 1 to 100 kPa {100 to 10000 mmH2O} {4 to 400 inH2O} {10 to 1000 mbar}
  • Wetted parts material*11 : S = [Body]*2 SCS14A, [Capsule] SUS316L*5, [Vent plug] SUS316*13
  • Process connections : 4 = With 1/2 NPT female process connector
  • Bolts and nuts material : B = [Maximum working pressure] SUS630 16 MPa {160 kgf/cm2}*9
  • Installation : 9 = Horizontal impulse piping type, left side high pressure*8
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plug
  • Integral indicator : E = Digital indicator with the range setting switch*10
  • Mounting bracket : A = SECC Carbon steel 2-inch pipe mounting (flat type)
  • Shipping Weight : 5Kg
RM3,813.40
  • Estimated Lead Time : 2 - 4 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110A-EMS4B-92NA/CF1/D1
  • Product type : Differential Pressure Transmitter
  • Output Signal : E = 4 to 20 mA DC with digital communication (HART protocol, refer to GS 01C22T01-00E)
  • Measurement span(capsule) : M = 1 to 100 kPa {100 to 10000 mmH2O} {4 to 400 inH2O} {10 to 1000 mbar}
  • Wetted parts material*11 : S = [Body]*2 SCS14A, [Capsule] SUS316L*5, [Vent plug]SUS316*13
  • Process connections : 4 = With 1/2 NPT female process connector
  • Bolts and nuts material : B = [Maximum working pressure SUS630 16 MPa {160 kgf/cm2}*9
  • Installation : 9 = Horizontal impulse piping type, left side high pressure*8
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plug
  • Integral indicator : N = (None)
  • Mounting bracket : A = SECC Carbon steel 2-inch pipe mounting (flat type)
  • Shipping Weight : 5Kg
RM3,707.60
  • Estimated Lead Time : 2 - 4 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110A-EVS4B-92DB/FF1/M11
  • Product type : EJA110A Differential Pressure Transmitter
  • Output Signal : E = 4 to 20 mA DC with digital communication (HART protocol, refer to GS 01C22T01-00E)
  • Measurement span(capsule) : V = 0.14 to 14 MPa { 1.4 to 140 kgf/cm2}*1 {20 to 2000 psi} {1.4 to 140 bar}
  • Wetted parts material*11 : S = [Body]*2 SCS14A, [Capsule] SUS316L*5, [Vent plug] SUS316*13
  • Process connections : 4 = With 1/2 NPT female process connector
  • Bolts and nuts material : B = [Maximum working pressure] SUS630 16 MPa {160 kgf/cm2}*9
  • Installation : 9 = Horizontal impulse piping type, left side high pressure*8
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plug
  • Integral indicator : D = Digital indicator
  • Mounting bracket : B = SUS304, 2-inch pipe mounting (flat type)
  • Factory Mutual (FM) : FF1 = FM Explosionproof Approval
  • Mill Certificate : M11 = Cover flange, Process connector
  • Weight : 3.9 Kg
  • Shipping Weight : 5Kg
RM3,003.80
  • Estimated Lead Time : 2 - 4 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-DFS3G-817DD/D3
  • Product type : EJA110E Differential Pressure Transmitter
  • Output signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)
  • Measurement span (capsule) : F = 0.5 to 5 kPa (2.0 to 20 inH2O) (For Wetted parts material code S)
  • Wetted parts material : S = Cover flange and process connector - ASTM CF-8M, Capsule - Hastelloy C-276 (Diaphragm)F316L SST, 316L SST (Others), Capsule gasket - Teflon-coated 316L SST, Vent/Drain plug - 316 SST
  • Process connections : 3 = with 1/4 NPT female process connector
  • Bolts and nuts material : G = 316L SST
  • Installation : 8 = Horizontal piping and right side high pressure
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug
  • Integral indicator : D = Digital indicator
  • Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
  • Calibration units : D3 = bar calibration (bar unit)
  • Weight : 3.7 Kg
  • Shipping Weight : 5 Kg
RM3,827.20
  • Estimated Lead Time : 8 - 12 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-DHS3J-914NN
  • Product type : Differential Pressure Transmitter
  • Output signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)
  • Measurement span (capsule) : H = 5 to 500 kPa (20 to 2000 inH2O)
  • Wetted parts material *2 : S = Cover flange and process connector - ASTM CF-8M *1, Capsule - Hastelloy C-276 *2 (Diaphragm)F316L SST, 316L SST (Others), Capsule gasket - Teflon-coated 316L SST, Vent/Drain plug - 316 SST
  • Process connections : 3 = with 1/4 NPT female process connector
  • Bolts and nuts material : J = B7 carbon steel
  • Installation : 9 = Horizontal piping and left side high pressure
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : N = None
  • Integral indicator : N = None
  • Shipping Weight : 5 Kg
RM4,577.00
  • Estimated Lead Time : In stock. Usually ships in 5-7 working days

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-DHS3J-914NN/D4

  • Product type : EJA110E Differential Pressure Transmitter

  • Output signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)

  • Measurement span (capsule) : H = 5 to 500 kPa (20 to 2000 inH2O)

  • Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others), Teflon-coated 316L SST Capsule gasket, 316 SST Vent/Drain plug.

  • Process connections : 3 = with 1/4 NPT female process connector

  • Bolts and nuts material J = B7 carbon steel

  • Installation : 9 = Horizontal piping and left side high pressure

  • Amplifier housing : 1 = Cast aluminum alloy

  • IElectrical connection : 4 = M20 female, two electrical connections without blind plugs

  • Integral indicator : N = None

  • Mounting bracket : N = None

  • D4 : Calibration units = M calibration (kgf/cm2 unit).

  • Shipping Weight : 5 Kg

RM4,774.80
  • Estimated Lead Time : 2 - 4 weeks.

  • Manufacturer : Yokogawa

  • Product No. :

RM4,462.00
  • Estimated Lead Time : 8 - 10 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-DMS4G-719DD/D4
  • Product type : EJA110E Differential Pressure Transmitter
  • Output signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)
  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
  • Wetted parts material : S = Cover flange and process connector - ASTM CF-8M, Capsule - Hastelloy C-276 (Diaphragm)F316L SST, 316L SST (Others), Capsule gasket - Teflon-coated 316L SST, Vent/Drain plug - 316 SST
  • Process connections : 4 = With 1/2 NPT female process connector
  • Bolts and nuts material : G = 316L SST
  • Installation : 7 = Vertical piping, left side high pressure, and process connection downside
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 9 = M20 female, two electrical connections and a blind plug
  • Integral indicator : D = Digital indicator
  • Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
  • Calibration units : D4 = M calibration (kgf/cm2 unit)
  • Weight : 2.8 Kg
  • Shipping Weight : 4 Kg
RM5,474.00
  • Estimated Lead Time : 8 - 10 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-DMS4J-912NB/D4
  • Product Type : Differential Pressure Transmitter
  • This product is a replacement for EJA110A-DMS4A-92NA/D4 Differential Pressure Transmitter

  • Output signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)
  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
  • Wetted parts material : S

    • Cover flange and process connector : ASTM CF-8M

    • Capsule : Hastelloy C-276 *2 (Diaphragm), F316L SST, 316L SST (Others)

    • Capsule gasket : Teflon-coated 316L SST

    • Vent/Drain plug : 316 SST

  • Process connections : 4 = with 1/2 NPT female process connector
  • Bolts and nuts materia : J = B7 carbon steel
  • Installation : 9 = Horizontal piping and left side high pressure
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
  • Integral indicator : N = None
  • Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
  • Calibration units : D4 = M calibration (kgf/cm2 unit)
  • Weight : 2.8 Kg
  • Shipping Weight : 4Kg

 

RM3,665.00
  • Estimated Lead Time : In stock. Usually ships in 5-7 working days
  • Manufacturer : Mitsubishi
  • Product No. : EJA110E-DMS4J-912NB/D4
  • Product Type : Differential Pressure Transmitter
  • Output signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)
  • Measurementspan (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
  • Wetted parts material code : S = Cover flange and process
  • connector:ASTM CF-8M *1 ,Capsule:Hastelloy C-276 *2 (Diaphragm)
  • F316L SST,316L SST (Others),Capsule gasket:Teflon-coated 316L SST, Vent/Drain plug:316 SST
  • Process connections : 4 = 1/2 NPT female process connector
  • Bolts and nuts materia : J = B7 carbon steel
  • Installation : 9 = Horizontal piping and left side high pressure
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
  • Integral indicator : N = None
  • Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
  • Shipping Weight : 4Kg

 

RM2,967.00
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-DMS4J-912NN/D4

  • Product type : EJA110E Differential Pressure Transmitter

  • Output signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)

  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)

  • Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others), Teflon-coated 316L SST Capsule gasket, 316 SST Vent/Drain plug.

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts material J = B7 carbon steel

  • Installation : 9 = Horizontal piping and left side high pressure

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

  • Integral indicator : N = None

  • Mounting bracket : N = None

  • D4 : Calibration units = M calibration (kgf/cm2 unit).

  • Shipping Weight : 5 Kg

RM5,211.80
  • Estimated Lead Time : 4 - 6 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-JFS4G-919DD-KU22
  • Product type : Differential Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
  • Measurement span (capsule) : F = 0.5 to 5 kPa (2.0 to 20 inH2O) (For Wetted parts material code S)
  • Wetted parts material *2 : S = Cover flange and process
  • connector ASTM CF-8M *1, Capsule Hastelloy C-276 *2 (Diaphragm)F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
  • Process connections : 4 = With 1/2 NPT female process connector
  • Bolts and nuts material : G = 316L SST
  • Installation : 9 = Horizontal piping and left side high pressure
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 9 = M20 female, two electrical connections and a blind plug*7
  • Integral indicator : D = Digital indicator*8
  • Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
  • Shipping weight : 5Kg
RM4,080.20
  • Estimated Lead Time : 8 - 10 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-JHS4G-322DD/KS21
  • Product type : Differential Pressure Transmitter
  • Output signal: J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)?
  • Measurement span (capsule) : H = 5 to 500 kPa (20 to 2000 inH2O)
  • Wetted parts material? : S = Cover flange and process connector : ASTM CF-8M? , Capsule: Hastelloy C-2764 (Diaphragm); F316L SST, 316L SST (Others) , Capsule gasket: Teflon-coated 316L SST , Vent/Drain plug: 316 SST
  • Process connections : 4 = with 1/2 NPT female process connector
  • Bolts and nuts material : G = 316L SST
  • Installation: -3
  • Amplifier housing : 2 = ASTM CF-8M stainless steel6
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs plug5
  • Integral indicator : D = Digital indicator5
  • Mounting bracket : D = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
  • Shipping Weight : 6Kg
RM5,828.20
  • Estimated Lead Time : 4 - 8 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JHS4G-722ND/KU22/A/D4

  • Product type : EJA110E Differential pressure transmitter

  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : H = 5 to 500 kPa (20 to 2000 inH2O)

  • Wetted parts material : S =ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts material : G = 316L SST

  • Installation : 7 = Vertical piping, left side high pressure, and process connection downside

  • Amplifier housing : 2 = ASTM CF-8M stainless steel

  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

  • Integral indicator : N = None

  • Mounting bracket : D =304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)

  • ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic *1 *3 [ATEX Intrinsically safe Ex ic] Applicable Standard: EN 60079-0:2012, EN 60079-11:2012 II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?30 to 60?C (?22 to 140?F) *2 Ui=30 V, Ci=27.6 nF, Li=0

RM3,643.20
  • Estimated Lead Time : 3 - 4 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-JHS4G-817EB/D3/M11
  • Product type : EJA110E Differential Pressure Transmitter
  • Model : EJA110E = Differential pressure transmitter
  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
  • Measurement span (capsule) : H = 5 to 500 kPa (20 to 2000 inH2O)
  • Wetted parts material *2 : S = Cover flange and process connector ASTM CF-8M *1 , Capsule Hastelloy C-276 *2(Diaphragm) F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
  • Process connections : 4 = with 1/2 NPT female process connector
  • Bolts and nuts material : G = 316L SST
  • Installation : 8 = Horizontal piping and right side high pressure
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug
  • Integral indicator : E = Digital indicator with the range setting switch (push button)*9
  • Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
  • Calibration units : D3 = bar calibration (bar unit)
  • Material certificate : M11 = Cover flange, Process connector
  • Weight : 2.8 Kg
  • Shipping weight : 8 Kg
RM3,736.00
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. :

RM3,270.60
  • Estimated Lead Time : 8 - 10 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-JHS4G-912EB/KS21/X2/A
  • Product type : Differential Pressure Transmitter
  • Model : EJA110E = Differential pressure transmitter
  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
  • Measurement span (capsule) : H = 5 to 500 kPa (20 to 2000 inH2O)
  • Wetted parts material *2 : S = Cover flange and process connector ASTM CF-8M *1 , Capsule Hastelloy C-276 *2(Diaphragm) F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
  • Process connections : 4 = with 1/2 NPT female process connector
  • Bolts and nuts material : G = 316L SST
  • Installation : 9 = Horizontal piping and left side high pressure
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
  • Integral indicator : E = Digital indicator with the range setting switch (push button)*9
  • Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
  • ATEX : KS21 = ATEX Intrinsically safe Approval *1 *3 Applicable Standard: EN 60079-0:2012/A11:2013, EN 60079-11:2012, EN 60079-26:2007 Certificate: DEKRA 11ATEX0228 X II 1G, 2D Ex ia IIC T4 Ga, Ex ia IIIC T85?C T100?C T120?C Db Degree of protection: IP66/IP67 Amb. Temp. (Tamb) for EPL Ga: ?50 to 60?C (?58 to 140?F) Maximum Process Temp. (Tp) for EPL Ga:120?C Electrical data: Ui=30 V, Ii=200 mA, Pi=0.9 W, Ci=27.6 nF, Li=0
RM4,055.00
  • Estimated Lead Time : 8 - 10 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-JHS4G-912EJ
  • Product type : EJA110E Differential Pressure Transmitter
  • Model : EJA110E = Differential pressure transmitter
  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
  • Measurement span (capsule) : H = 5 to 500 kPa (20 to 2000 inH2O)
  • Wetted parts material *2 : S = Cover flange and process connector ASTM CF-8M *1 , Capsule Hastelloy C-276 *2(Diaphragm) F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
  • Process connections : 4 = with 1/2 NPT female process connector
  • Bolts and nuts material : G = 316L SST
  • Installation : 9 = Horizontal piping and left side high pressure
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
  • Integral indicator : E = Digital indicator with the range setting switch (push button)*9
  • Mounting bracket : J = 316 SST 2-inch pipe mounting, flat type (for horizontal piping)
  • Weight : 2.8 Kg
  • Shipping weight : 5 Kg
RM3,883.00
  • Estimated Lead Time : 4 - 6 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-JHS4G-919DD-KU22
  • Product type : Differential Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
  • Measurement span (capsule) : H = 5 to 500 kPa (20 to 2000 inH2O)
  • Wetted parts material *2 : S = Cover flange and process connector ASTM CF-8M *1, Capsule Hastelloy C-276 *2(Diaphragm)F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
  • Process connections : 4 = With 1/2 NPT female process connector
  • Bolts and nuts material : G = 316L SST
  • Installation : 9 = Horizontal piping and left side high pressure
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 9 = M20 female, two electrical connections and a blind plug*7
  • Integral indicator : D = Digital indicator*8
  • Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
  • Shipping weight : 4Kg
RM3,735.20
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JLH4G-712DD/KU22

  • Product type : EJA110E Differential pressure transmitter

  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : L = 0.5 to 10 kPa (2.0 to 40 inH2O) (For Wetted parts material code M, H, T, A, D, B and W)

  • Wetted parts material : H = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 Capsule, PTFE Teflon Capsule gasket , 316 SST Vent/Drain plug.

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts material : G = 316L SST

  • Installation : 7 = Vertical piping, left side high pressure, and process connection downside

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

  • Integral indicator : D = Digital indicator with the range setting switch (push button)

  • Mounting bracket : D =Digital indicator

  • ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic *1 *3 [ATEX Intrinsically safe Ex ic] Applicable Standard: EN 60079-0:2012, EN 60079-11:2012 II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?30 to 60?C (?22 to 140?F) *2 Ui=30 V, Ci=27.6 nF, Li=0

RM5,827.00
  • Estimated Lead Time : 4 - 8 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JLH4G-722ED/KU22/A/D4

  • Product type : EJA110E Differential pressure transmitter

  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : L = 0.5 to 10 kPa (2.0 to 40 inH2O) (For Wetted parts material code M, H, T, A, D, B and W)

  • Wetted parts material : H = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 Capsule, PTFE Teflon Capsule gasket , 316 SST Vent/Drain plug.

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts material : G = 316L SST

  • Installation : 7 = Vertical piping, left side high pressure, and process connection downside

  • Amplifier housing : 2 = ASTM CF-8M stainless steel

  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

  • Integral indicator : E = Digital indicator with the range setting switch (push button)

  • Mounting bracket : D =304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)

  • ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic *1 *3 [ATEX Intrinsically safe Ex ic] Applicable Standard: EN 60079-0:2012, EN 60079-11:2012 II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?30 to 60?C (?22 to 140?F) *2 Ui=30 V, Ci=27.6 nF, Li=0

RM4,379.20
  • Estimated Lead Time : 2 - 4 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JLH4G-912DJ

  • Product type : Differential Pressure Transmitter

  • EJA110E : Differential pressure transmitter

  • J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • L - Measurement span (capsule) : 0.5 to 10 kPa (2.0 to 40 inH2O)(For Wetted parts material code M, H, T, A, D, B and W)

  • H - Wetted parts material 

  • Cover flange and process connector : ASTM CF-8M

  • Capsule : Hastelloy C-276

  • Capsule gasket : PTFE Teflon 

  • Vent/Drain plug : 316 SST 

  • 4 - Process connections : with 1/2 NPT female process connector

  • G - Bolts and nuts material : 316L SST

  • 9 - Installation : Horizontal piping and left side high pressure

  • 1 - Amplifier housing : cast aluminum alloy

  • 2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

  • D - Integral indicator : Digital Indicator

  • J - Mounting bracket : 316 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • Weight : 2.8 Kg

  • Shipping weight : 4 Kg

RM4,071.00
  • Estimated Lead Time : 2 - 4 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JLH4G-917NB/K

  • Product type : EJA110E Differential pressure transmitter

  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : L = 0.5 to 10 kPa (2.0 to 40 inH2O) (For Wetted parts material code M, H, T, A, D, B and W)

  • Wetted parts material : H = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 Capsule, PTFE Teflon Capsule gasket , 316 SST Vent/Drain plug.

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts material : G = 316L SST

  • Installation : 9 = Horizontal piping and left side high pressure

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug

  • Integral indicator : N = None

  • Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • Shipping Weight : 4.5 Kg

RM4,797.80
  • Estimated Lead Time : 8 - 10 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-JLS4G-322DD/KS21
  • Product type : Differential Pressure Transmitter
  • Output signal: J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)?
  • Measurement span (capsule) : L = 0.5 to 10 kPa (2.0 to 40 inH2O) (For Wetted parts material code M, H, T, A, D, B and W)
  • Wetted parts material? : S = Cover flange and process connector : ASTM CF-8M? , Capsule: Hastelloy C-2764 (Diaphragm); F316L SST, 316L SST (Others) , Capsule gasket: Teflon-coated 316L SST , Vent/Drain plug: 316 SST
  • Process connections : 4 = with 1/2 NPT female process connector
  • Bolts and nuts material : G = 316L SST
  • Installation: -3
  • Amplifier housing : 2 = ASTM CF-8M stainless steel6
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs plug5
  • Integral indicator : D = Digital indicator5
  • Mounting bracket : D = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
  • Shipping Weight : 6Kg
RM8,390.40
  • Estimated Lead Time : 4 - 6 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JLS4J-912EB/KU22/D3/M11

  • Product type : EJA110E Differential pressure transmitter

  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : L = 0.5 to 10 kPa (2.0 to 40 inH2O) (For Wetted parts material code M, H, T, A, D, B and W)

  • Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts material : J = B7 carbon steel

  • Installation : 9 = Horizontal piping and left side high pressure

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

  • Integral indicator : E = Digital indicator with the range setting switch (push button)

  • Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic

  • Calibration units. : D3 = bar calibration (bar unit)

  • Material certificate. : M11 = Cover flange, Process connector

  • Shipping Weight : 4.5 Kg

RM4,282.60
  • Estimated Lead Time : 2 - 4 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JMB5G-72DDK/KS21/D3/M01/T12

  • Product type : EJA110E Differential Pressure Transmitter

  • EJA110E : Differential pressure transmitter

  • J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • M - Measurement span (capsule) : 1 to 100 kPa (4 to 400 inH2O)

  • B - Wetted parts material 

  • Cover flange and process connector : Monel equivalent

  • Capsule : Monel

  • Capsule gasket : PTFE Teflon

  • Vent/Drain plug : Monel

  • 5 - Process connections See the table in the next page for the codes for a diaphragm seal system : Without process connector (1/4 NPTfemale on the cover flanges)

  • G - Bolts and nuts material : 316L SST

  • 7 - Installation : Vertical piping, left side high pressure, and process connection downside

  • 2 - Amplifier housing : ASTM CF-8M stainless steel

  • D - Electrical connection : M20 female, two electrical connections and a SUS316 blind plug

  • D - Integral indicator : Digital indicator

  • K - Mounting bracket : 316 SST or SCS14A 2-inch pipe mounting, L type (for vertical piping)

  • KS21 : ATEX Intrinsically safe Approval = Applicable Standard: EN 60079-0:2012+A11:2013, EN 60079-11:2012 Certificate: DEKRA 11ATEX0228 X II 1G, 2D Ex ia IIC T4 Ga, Ex ia IIIC T85?C T100?C T120?C Db Degree of protection: IP66/IP67 Amb. Temp. (Tamb) for EPL Ga: ?50 to 60?C (?58 to 140?F) Maximum Process Temp. (Tp) for EPL Ga:120?C Electrical data: Ui=30 V, Ii=200 mA, Pi=0.9 W, Ci=27.6 nF, Li=0

RM5,299.20
  • Estimated Lead Time : 8 - 10 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-JMH4G-322DD/KS21
  • Product type : Differential Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)
  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
  • Wetted parts material : H = Cover flange and process connector ASTM CF-8M *1,Capsule Hastelloy C-276 *2, Capsule gasket PTFE Teflon,Vent/Drain plug 316 SST
  • Process connections : 4 = with 1/2 NPT female process connector
  • Bolts and nuts material : G = 316L SST
  • Amplifier housing : 3 = Cast aluminum alloy with corrosion resistance properties*5
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
  • Integral indicator : D = Digital indicator*8
  • Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
  • Shipping Weight : 6Kg
RM5,828.20
  • Estimated Lead Time : 4 - 6 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JMH4G-929DB/FF1/D3

  • Product type : EJA110E Differential pressure transmitter

  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)

  • Wetted parts material : H = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 Capsule, PTFE Teflon Capsule gasket , 316 SST Vent/Drain plug.

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts material : G = 316L SST

  • Installation : 9 = Horizontal piping and left side high pressure

  • Amplifier housing : 2 = ASTM CF-8M stainless steel

  • Electrical connection : 9 = M20 female, two electrical connections and a blind plug

  • Integral indicator : D = Digital indicator

  • Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • Factory Mutual (FM) : FF1 = FM Explosionproof Approval

  • Calibration units. : D3 = bar calibration (bar unit)

  • Shipping Weight : 6 Kg

RM5,681.00
  • Estimated Lead Time : 4 - 6 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-JMH5J-912DA/NF2
  • Product type : Differential Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)
  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
  • Wetted parts material : H = Cover flange and process connector ASTM CF-8M *1,Capsule Hastelloy C-276 *2, Capsule gasket PTFE Teflon,Vent/Drain plug 316 SST
  • Process connections : 5 = without process connector (1/4 NPT female on the cover flanges)
  • Bolts and nuts material : J = B7 carbon steel
  • Installation : 9 = Horizontal piping and left side high pressure
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
  • Integral indicator : D = Digital indicator*8
  • Mounting bracket : A
  • NF2
  • Shipping Weight : 8 Kg
RM3,929.00
  • Estimated Lead Time : 6 - 8 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JMS4G-712DC

  • Product type : EJA110E Differential Pressure Transmitter

  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)

  • Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts material : G = 316L SST

  • Installation : 7 = Vertical piping, left side high pressure, and process connection downside

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

  • Integral indicator : D = Digital indicator

  • Mounting bracket : C

  • Weight : 2.8 Kg

  • Shipping Weight : 4 Kg

RM5,052.50
  • Estimated Lead Time : 8 - 10 weeks.

  • Product replacement for EJA110A-EMS4B-67DD/T12

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JMS4G-717DD/T12

  • Product type : EJA110E Differential pressure transmitter

  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)

  • Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts material : G = 316L SST

  • Installation : 7 = Vertical piping, left side high pressure, and process connection downside

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug

  • Integral indicator : D = Digital indicator

  • Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)

  • Pressure test/ Leak test certificate : T12 = Test Pressure: 16 MPa(2300 psi), Nitrogen(N2), Gas Retention time: one minute.

  • Weight : 2.8 Kg

  • Shipping Weight : 4 Kg

RM4,305.60
  • Estimated Lead Time : 2 - 4 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JMS4G-717ND/D4

  • Product type : EJA110E Differential pressure transmitter

  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)

  • Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts material : G = 316L SST

  • Installation : 7 = Vertical piping, left side high pressure, and process connection downside

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug

  • Integral indicator : N = None

  • Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)

  • Calibration units. : D4 = M calibration (kgf/cm2 unit)

  • Shipping Weight : 4.5 Kg

RM3,735.20
  • Estimated Lead Time : 4 - 6 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JMS4G-71CDD/D4

  • Product type : EJA110E Differential Pressure Transmitter

  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)

  • Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts material : G = 316L SST

  • Installation : 7 = Vertical piping, left side high pressure, and process connection downside

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : C = 1/2 NPT female, two electrical connections and a SUS316 blind plug

  • Integral indicator : D = Digital indicator

  • Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)

  • Calibration units : D4 = M calibration (kgf/cm2 unit)

  • Weight : 2.8 Kg

  • Shipping Weight : 4 Kg

RM3,036.00
  • Estimated Lead Time : 2 - 4 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JMS4G-817EB/D4

  • Product type : EJA110E Differential pressure transmitter

  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)

  • Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts material : G = 316L SST

  • Installation : 8 = Horizontal piping and right side high pressure

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug

  • Integral indicator : E = Digital indicator with the range setting switch (push button)

  • Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • Calibration units. : D4 = M calibration (kgf/cm2 unit)

  • Shipping Weight : 4.5 Kg

RM3,707.60
  • Estimated Lead Time : 8 - 10 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-JMS4G-912DB/FF1/X2/A/D4
  • Product type : Differential Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
  • Wetted parts material : S = Cover flange and process connector ASTM CF-8M, Capsule Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) , Capsule gasket Teflon-coated 316L SST , Vent/Drain plug 316 SST
  • Process connections : 4 = With 1/2 NPT female process connector
  • Bolts and nuts material : G = 316L SST
  • Installation : 9 = Horizontal piping and left side high pressure
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
  • Integral indicator : D = Digital indicator
  • Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
  • Shipping weight : 4Kg
RM6,251.40
  • Estimated Lead Time : 2 - 4 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JMS4G-917DB/D4/HE

  • Product Type : Differential Pressure Transmitter

  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)

  • Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts material : G = 316L SST

  • Installation : 9 = Horizontal piping and left side high pressure

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug*

  • Integral indicator : D = Digital indicator

  • Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • Calibration units : D4 = M calibration (kgf/cm2 unit)

  • Fluoro-rubber O-ring : HE = All O-rings of amplifier housing. Lower limit of ambient temperature: ?15?C (5?F)

  • Weight : 2.8 Kg

  • Shipping Weight : 8 Kg

RM2,769.00
  • Estimated Lead Time : 8 - 10 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-JMS4G-917DB/FU1
  • Product type : EJA110E Differential Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
  • Wetted parts material *2 : S = Cover flange and process connector ASTM CF-8M *1, Capsule Hastelloy C-276 *2(Diaphragm)F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
  • Process connections : 4 = With 1/2 NPT female process connector
  • Bolts and nuts material : G = 316L SST
  • Installation : 9 = Horizontal piping and left side high pressure
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug
  • Integral indicator : D = Digital indicator*8
  • Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
  • Integral indicator : D = Digital indicator*8
  • Factory Mutual (FM) : FU1 = Combined FF1 and FS1
  • Weight : 2.8 Kg
  • Shipping weight : 4Kg
RM4,094.00
  • Estimated Lead Time : 4 - 6 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-JMS4G-919DD-KU22
  • Product type : Differential Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
  • Wetted parts material *2 : S = Cover flange and process connector ASTM CF-8M *1, Capsule Hastelloy C-276 *2(Diaphragm)F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
  • Process connections : 4 = With 1/2 NPT female process connector
  • Bolts and nuts material : G = 316L SST
  • Installation : 9 = Horizontal piping and left side high pressure
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 9 = M20 female, two electrical connections and a blind plug*7
  • Integral indicator : D = Digital indicator*8
  • Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
  • Shipping weight : 4Kg
RM3,735.20
  • Estimated Lead Time : 4 - 6 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JMS4J-912EB/KU22/D3/M11

  • Product type : EJA110E Differential pressure transmitter

  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)

  • Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts material : J = B7 carbon steel

  • Installation : 9 = Horizontal piping and left side high pressure

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

  • Integral indicator : E = Digital indicator with the range setting switch (push button)

  • Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic

  • Calibration units. : D3 = bar calibration (bar unit)

  • Material certificate. : M11 = Cover flange, Process connector

  • Shipping Weight : 4.5 Kg

RM3,675.40
  • Estimated Lead Time : 2 - 4 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JMS4J-914NB/D4

  • Product type : EJA110E Differential pressure transmitter

  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)

  • Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts material : J = B7 carbon steel

  • Installation : 9 = Horizontal piping and left side high pressure

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : 4 = M20 female, two electrical connections without blind plugs

  • Integral indicator : N = None

  • Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • Calibration units. : D4 = M calibration (kgf/cm2 unit)

  • Shipping Weight : 4.5 Kg

RM3,762.80
  • Estimated Lead Time : 4 - 8 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-JMS4J-917EB/D4
  • Product type : Differential Pressure Transmitter
  • Model : EJA110E = Differential pressure transmitter
  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
  • Wetted parts material *2 : S = Cover flange and process connector ASTM CF-8M *1 , Capsule Hastelloy C-276 *2(Diaphragm) F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
  • Process connections : 4 = with 1/2 NPT female process connector
  • Bolts and nuts material : J = B7 carbon steel
  • Installation : 9 = Horizontal piping and left side high pressure
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug*7
  • Integral indicator : E = Digital indicator with the range setting switch (push button)*9
  • Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
  • Calibration units : D4 = M calibration (kgf/cm2 unit)
  • Shipping weight : 5 Kg
RM7,792.40
  • Estimated Lead Time : 8 - 10 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-JMS4J-917EB/KU22
  • Product type : Differential Pressure Transmitter
  • Model : EJA110E = Differential pressure transmitter
  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
  • Wetted parts material *2 : S = Cover flange and process
  • connector ASTM CF-8M *1 , Capsule Hastelloy C-276 *2(Diaphragm) F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
  • Process connections : 4 = with 1/2 NPT female process connector
  • Bolts and nuts material : J = B7 carbon steel
  • Installation : 9 = Horizontal piping and left side high pressure
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug*7
  • Integral indicator : E = Digital indicator with the range setting switch (push button)*9
  • Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
  • Shipping weight : 5Kg
RM5,087.60
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JMS5G-912NJ

  • Product type : Differential Pressure Transmitter

  • EJA110E : Differential pressure transmitter

  • J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • M - Measurement span (capsule) : 1 to 100 kPa (4 to 400 inH2O)

  • S - Wetted parts material 

  • Cover flange and process connector : ASTM CF-8M

  • Capsule : Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) 

  • Capsule gasket : Teflon-coated 316 SST 

  • Vent/Drain plug : 316 SST 

  • 5 - Process connections See the table in the next page for the codes for a diaphragm seal system : Without process connector (1/4 NPTfemale on the cover flanges)

  • G - Bolts and nuts material : 316L SST

  • 9 - Installation : Horizontal piping and left side high pressure

  • 1 - Amplifier housing : cast aluminum alloy

  • 2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

  • N - Integral indicator : None 

  • J - Mounting bracket : 316 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • Weight : 2.8 Kg

  • Shipping weight : 8 Kg

RM4,833.00
  • Estimated Lead Time : 2 - 4 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JMS5G-912NJ

  • Product type : Differential Pressure Transmitter

  • EJA110E : Differential pressure transmitter

  • J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • M - Measurement span (capsule) : 1 to 100 kPa (4 to 400 inH2O)

  • S - Wetted parts material 

  • Cover flange and process connector : ASTM CF-8M

  • Capsule : Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) 

  • Capsule gasket : Teflon-coated 316 SST 

  • Vent/Drain plug : 316 SST 

  • 5 - Process connections See the table in the next page for the codes for a diaphragm seal system : Without process connector (1/4 NPTfemale on the cover flanges)

  • G - Bolts and nuts material : 316L SST

  • 9 - Installation : Horizontal piping and left side high pressure

  • 1 - Amplifier housing : cast aluminum alloy

  • 2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

  • N - Integral indicator : None 

  • J - Mounting bracket : 316 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • Weight : 2.8 Kg

  • Shipping weight : 8 Kg

RM3,735.20
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JMS5G-914DB/KU22/M01/A1

  • Product type : EJA110E Differential Pressure Transmitter

  • EJA110E : Differential pressure transmitter

  • J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • M - Measurement span (capsule) : 1 to 100 kPa (4 to 400 inH2O)

  • S - Wetted parts material 

  • Cover flange and process connector : ASTM CF-8M

  • Capsule : Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) 

  • Capsule gasket : Teflon-coated 316 SST 

  • Vent/Drain plug : 316 SST 

  • 5 - Process connections See the table in the next page for the codes for a diaphragm seal system : Without process connector (1/4 NPTfemale on the cover flanges)

  • G - Bolts and nuts material : 316L SST

  • 9 - Installation : Horizontal piping and left side high pressure

  • 1 - Amplifier housing : cast aluminum alloy

  • 4 - Electrical connection : M20 female, two electrical connections without blind plugs

  • D - Integral indicator : Digital indicator

  • B - Mounting bracket : 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • KU22 : ATEX = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic *1 *3 [ATEX Intrinsically safe Ex ic] Applicable Standard: EN 60079-0:2012+A11:2013, EN 60079-11:2012 II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?30 to 60?C (?22 to 140?F) *2 Ui=30 V, Ci=27.6 nF, Li=0

RM6,679.20
  • Estimated Lead Time : 8 - 10 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-JMS5G-91CEJ
  • Product type : Differential Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 1 to 100 kPa (4 to 400 inH2O)inH2O)
  • Wetted parts material *2 : S = Cover flange and process connector ASTM CF-8M *1, Capsule Hastelloy C-276 *2 (Diaphragm)F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
  • Process connections : G = 316L SST
  • Installation : 9 = Horizontal piping and left side high pressureAmplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : C = 1/2 NPT female, two electrical connections and a SUS316 blind plug
  • Integral indicator : E = Digital indicator with the range setting switch (push button)*9
  • Mounting bracket : J = 316 SST 2-inch pipe mounting, flat type (for horizontal piping)
  • Shipping weight : 4Kg
RM6,817.20
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JMS5G-922DJ/KU22

  • Product type : EJA110E Differential Pressure Transmitter

  • EJA110E : Differential pressure transmitter

  • J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • M - Measurement span (capsule) : 1 to 100 kPa (4 to 400 inH2O)

  • S - Wetted parts material 

  • Cover flange and process connector : ASTM CF-8M

  • Capsule : Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) 

  • Capsule gasket : Teflon-coated 316 SST 

  • Vent/Drain plug : 316 SST 

  • 5 - Process connections See the table in the next page for the codes for a diaphragm seal system : Without process connector (1/4 NPTfemale on the cover flanges)

  • G - Bolts and nuts material : 316L SST

  • 9 - Installation : Horizontal piping and left side high pressure

  • 2 - Amplifier housing : ASTM CF-8M stainless steel*

  • 2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

  • D - Integral indicator : Digital indicator

  • J - Mounting bracket : 316 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • KU22 : ATEX = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic *1 *3 [ATEX Intrinsically safe Ex ic] Applicable Standard: EN 60079-0:2012+A11:2013, EN 60079-11:2012 II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?30 to 60?C (?22 to 140?F) *2 Ui=30 V, Ci=27.6 nF, Li=0

RM6,467.00
  • Estimated Lead Time : 3 - 6 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JMS5G-92DDN/KS21/D3/N4/M01/T12

  • Product type : EJA110E Differential Pressure Transmitter

  • EJA110E : Differential pressure transmitter

  • J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • M - Measurement span (capsule) : 1 to 100 kPa (4 to 400 inH2O)

  • S - Wetted parts material 

  • Cover flange and process connector : ASTM CF-8M

  • Capsule : Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) 

  • Capsule gasket : Teflon-coated 316 SST 

  • Vent/Drain plug : 316 SST 

  • 5 - Process connections See the table in the next page for the codes for a diaphragm seal system : Without process connector (1/4 NPTfemale on the cover flanges)

  • G - Bolts and nuts material : 316L SST

  • 9 - Installation : Horizontal piping and left side high pressure

  • 2 - Amplifier housing : ASTM CF-8M stainless steel*

  • D - Electrical connection : M20 female, two electrical connections and a SUS316 blind plug

  • D - Integral indicator : Digital indicator

  • N - Mounting bracket : None

  • KS21 : ATEX = ATEX Intrinsically safe Approval *1 *3 Applicable Standard: EN 60079-0:2012+A11:2013, EN 60079-11:2012 Certificate: DEKRA 11ATEX0228 X II 1G, 2D Ex ia IIC T4 Ga, Ex ia IIIC T85?C T100?C T120?C Db Degree of protection: IP66/IP67 Amb. Temp. (Tamb) for EPL Ga: ?50 to 60?C (?58 to 140?F) Maximum Process Temp. (Tp) for EPL Ga:120?C Electrical data: Ui=30 V, Ii=200 mA, Pi=0.9 W, Ci=27.6 nF, Li=0

RM6,099.60
  • Estimated Lead Time :  6 - 8 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-JMS5J-912DD
  • Product type : EJA110E Differential pressure transmitter
  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
  • Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
  • Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket, 316 SST Vent/Drain plug.
  • Process connections : 5 = without process connector (1/4 NPT female on the cover flanges)
  • Bolts and nuts material : J = B7 carbon steel
  • Installation : 9 = Horizontal piping and left side high pressure
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
  • Integral indicator : D = Digital indicator
  • Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
  • Weight : 2.8 Kg
  • Shipping weight : 4 Kg
RM6,490.60
  • Estimated Lead Time : 4 - 6 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA110E-JVS0G-710DD/NF2/D3/X2
  • Product type : EJA110E Differential Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
  • Measurement span (capsule) : V = 0.14 to 14 MPa (20 to 2000 psi)
  • Wetted parts material : S = Cover flange and process connector - ASTM CF-8M, Capsule - Hastelloy C-276 (Diaphragm)F316L SST, 316L SST (Others), Capsule gasket - Teflon-coated 316L SST, Vent/Drain plug - 316 SST
  • Process connections : 0 = without process connector (Rc1/4 female on the cover flanges)
  • Bolts and nuts material : G = 316L SST
  • Installation : 7 = Vertical piping, left side high pressure, and process connection downside
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 0 = G1/2 female, one electrical connection without blind plugs
  • Integral indicator : D = Digital indicator
  • Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
  • NF2
  • Calibration units : D3 = bar calibration (bar unit)
  • Painting : X2 = Coating change Anti-corrosion coating
  • Shipping Weight : 8 Kg
RM4,589.00
  • Estimated Lead Time : 4 - 6 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA110E-JVS4J-912EB/KU22/D3/M11

  • Product type : EJA110E Differential pressure transmitter

  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : V = 0.14 to 14 MPa (20 to 2000 psi)

  • Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts material : J = B7 carbon steel

  • Installation : 9 = Horizontal piping and left side high pressure

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

  • Integral indicator : E = Digital indicator with the range setting switch (push button)

  • Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic

  • Calibration units. : D3 = bar calibration (bar unit)

  • Material certificate. : M11 = Cover flange, Process connector

  • Shipping Weight : 4.5 Kg

RM3,675.40