Estimated Lead Time : 5 - 7 working days.

Manufacturer: Honeywell

Product No : 10006/2/1

Product type : 3400310 Diagnostic and battery module (DBM)

The diagnostic and battery module (DBM) 10006/2/1 provides a low-cost interface for diagnosing the FSC system

Type number: 10006/2/1 08801*

Approvals : CE, T

Estimated Lead Time: 4-6 Weeks

Manufacturer: Honeywell

Type number: 10024/H/F 26801

Description: Enhanced COM Module

Series: FSC

Part Number: 3400302

Serial: 2052610006

Shipping Weight: 1.3 Kg

Estimated Lead Time: 5 - 7 working days

Manufacturer: Honeywell

Product number: 10101/2/1

Product type : Fail-safe digital input module(24 Vdc, 16 channels)

The modules are tested for: ability to receive logic level '0' signals, ability to receive logic level '1' signals, andcrosstalk between inputs.

Approvals: CE, TUV, UL

Software versions: = 3.00

Space requirements: 4 TE, 3 HE (= 4 HP, 3U)

Power requirements: 5 Vdc 8 mA,24 Vdc int. 110 mA,24 Vdc ext. 110 mA (input currents)

Ripple content (on 5 Vdc): < 0.5 Vp-p (0-360 Hz)

Number of input channels: 16

Maximum input voltage: 36 Vdc

Input current: 7 mA at 24 Vdc

Input HIGH: > 15 Vdc

Input LOW: < 9 Vdc (I < 2 mA)

Input delay: typically 10 ms

Weight : 0.2 Kg

Shipping Weight : 2 Kg

Estimated Lead Time: 4-6 Weeks

Manufacturer : Honeywell

Product No : 10105/2/1

Product type : Fail-safe high-density analog input module (24 Vdc, 16 channels)

The analog inputs of the 10105/2/1 module require the field signals to be converted from 0-20 mA to a level that can be used by the 10105/2/1 module.

This conversion can be established in two ways:on the field termination assembly module FTA-T-14, or using the analog input conversion module 10105/A/1, which is

placed on a programming connector (Px) on the back of the I/O backplane in the 19-inch rack.

Type number: 10105/2/1 16900

Approvals: CE; T

Estimated Lead Time : 5 - 7 working days.

Manufacturer: Honeywell

Product No : 10302/2/1

Product type : Watchdog repeater (WDR)

watchdog repeater is required in multiple-PSU configurations, for each subsequent 24 Vdc to 5 Vdc power supply unit, e.g. PSU 2, 3, 4.

watchdog repeater is required if the 24 Vdc is supplied via an M24-20 HE or M24-12 HE powersupply.

watchdog repeater is required if the 24 Vdc is supplied via a power supply which can provide supply voltages that exceed 31.0 Vdc. (The maximum output voltage of the 24 Vdc supply must be less than 37

Vdc under any single or double fault condition of the 24 Vdc power supply unit.)

watchdog repeater is required if the required watchdog current exceeds 900 mA.

watchdog repeater is required in configurations which combine redundant and non-redundant I/O, in order to create the watchdog output for the output modules of the non-redundant I/O part.

watchdog repeater is required in configurations with redundant Central Parts and non-redundant I/O, in order to monitor the 5 Vdc power supply (if no 5 Vdc monitoring is done).

Type number: 10302/2/1 12600

Approvals: CE, T

Estimated Lead Time: 8-10 Weeks

Manufacturer: Honeywell

Honeywell Chart Motor Kit For DR4500

30756113-501

Chart Recorder Drive Motor

Shipping Weight: 1 Kg

Estimated Lead Time: 5-7 Working Days

Manufacturer : Honeywell

30756150-001

Chart Hub Kit

Shipping Weight : 1 Kg

In Stock, Same Day Delivery

Manufacturer: Honeywell

Pen Arm Assembly 30756304-501(High Speed)

Honeywell Pen Assembly 1/Pkg

To Fit Truline Recorder

Shipping Weight : 1 Kg

Estimated Lead Time : 6-8 Weeks

Manufacturer : ABB

Product ID : 3BHT300007R1

ABB Type Designation : DO630

Catalog Description : DO630 Digital Output 16Ch 250VAC Isolated,16 Groups

Channel Type:N/A

Technical Information:Digital Output 16 Ch

Note! This part is exempted from the scope of 2011/65/EU (RoHS) as provided in Article 2(4)(c), (e), (f) and (j) therein (ref.: 3BSE088609 ? EU DECLARATION OF CONFORMITY - ABB Advant Master Process Control System)

Product Net Weight: 1.32 kg

Country of Origin:Sweden (SE)

Customs Tariff Number : 85389091

Shipping Weight : 2.3 Kg

Estimated Lead Time : 6-8 Weeks

Manufacturer : ABB

Product ID : 3BHT300025R1

ABB Type Designation : DI650

Catalog Description : DI650 Digital Input 32Ch 24VDC Isolated 4 Groups

Channel Type : N/A

Technical Information : Digital Input 32 Ch

Note! This part is exempted from the scope of 2011/65/EU (RoHS) as provided in Article 2(4)(c), (e), (f) and (j) therein(ref.: 3BSE088609 ? EU DECLARATION OF CONFORMITY

ABB Advant Master Process Control System)

Product Net Weight : 1.225 kg

Country of Origin : Sweden (SE), Poland (PL)

Customs Tariff Number : 85389091

Shipping Weight : 2.3 Kg

Estimated Lead Time : 6-8 Weeks

Manufacturer : ABB

Product ID : 3BHT300036R1

ABB Type Designation : AI625

Catalog Description : AI625 Analog Input 16Ch 12 Bit, 4-20 mA

Channel Type : N/A

Technical Information:Analog Input 16Ch

Note! This part is exempted from the scope of 2011/65/EU (RoHS) as provided in Article 2(4)(c), (e), (f) and (j) therein (ref.: 3BSE088609 ? EU DECLARATION OF CONFORMITY- ABB Advant Master Process Control System)

Product Net Weight : 1.225 kg

Country of Origin:Sweden (SE), Poland (PL)

Customs Tariff Number : 85389091

Shipping Weight : 2 Kg

Estimated Lead Time : 4 - 6 Weeks

Manufacturer : ABB

Product No. : CI532V02

Product Type : CI532V02 DCS System

Catalog Description : CI532V02 Submodule MODBUS Interface, 2 channels.

Technical Information : Modbus Interface

ABB Advant Master Process Control System)

PWeight : 0.155 kg

Shipping Weight : 2 Kg

Estimated Lead Time : 4 - 6 Weeks

Manufacturer : ABB

Product No. : 3BSE003827R1

Product Type : CI532V02 DCS System

Catalog Description : CI532V02 Submodule MODBUS Interface, 2 channels.

Technical Information : Modbus Interface

ABB Advant Master Process Control System)

PWeight : 0.155 kg

Shipping Weight : 2 Kg

Estimated Lead Time : 6-8 Weeks

Manufacturer : ABB

Product ID : 3BSE010536R1

ABB Type Designation : PM645A

Catalog Description : Processor Module

Product Net Weight : 1.75 kg

Country of Origin: Sweden (SE), Germany (DE)

Customs Tariff Number : 85389091

Technical Information: PM645A Processor Module With redundancy voter, high speed link Exchange No.?EXC3BSE010536R1

Shipping Weight : 3 Kg

Estimated Lead Time : In stock. Usually ships in 5-7 working days

Manufacturer : Honeywell

51196653-100

TDC 3000

Five-slot File Power Supply

Chassis Power Supply

CE-compliant

standard 3-pin connector

Shipping Weight : 2.5 Kg

Estimated Lead Time : 7 -10 working days.

Manufacturer : Honeywell

Product No : 51196655-100

Product type : TDC 3000 Power Supply Module

All our power supplies are shipped pinned for internal line frequency clock. If Sequence of Events (SOE) functionality is required on a NIM, the clock master, the clock slave, and the NIMs with SOE requirements must be pinned foir use with external clocks. All other nodes are pinned for internal (line frequency) clock. The jumper is located at position J102 and is clearly labled (INT) and (EXT).

Shipping Weight : 3 Kg

Estimated Lead Time: Delivery : 4 - 6 weeks.

Manufacturer : Honeywell

Product No : 51198947-100

Product type : HPM Power Supply (DCS Parts)

The power supply is an AC input, AC/DC output power supply intended for use in Honeywell UCN (PM, APM or HPM) equipment cabinets.

The supply operates from line voltage 85 to 264 VAC, or (48 Vdc) batteries, and is CE-compliant.

The DC output is nominally rated at the output pins to be 25.25 Vdc at a 10 amp load when powered from the AC Line, and 24.25Vdc when powered from 48V battery. The design also includes a charging circuit for the 48V battery. There is also a nominal 6 Vac, line-frequency output rated at 35 milliamps load, to provide line frequency synchronization.

The full load operating temperature range is -20 to +55 deg C. Derating of the output load capability applies linearly above 55

Estimated Lead Time: 7 - 10 working days.

Manufacturer: Honeywell

Product No : MC-PLAM02 / 51304362-150

Product type : Low Level Analog Input Multiplexer Processor (32 Inputs)

Non CE Compliant Part Number : N/A

CE Compliant Part Number : 51304362-150

IOP Type: Low Level Multiplexer (LLMux)

LLMux Assembles: LLMux IOP Conformally Coated

Shipping Weight : 5.5 Kg

Estimated Lead Time: 4 Weeks

Manufacturer: Honeywell

51304362-250

Model Number : MC-PSDX02

Non CE Compliant Part Number : N/A

CE Compliant Part Number : 51304362-250

Description : Serial Device Interface (SDI)

IOPs Conformally Coated

Serial Device Interface Processor (16 Points/Port)

Conformally coated assemblies are completely covered with a thin layer of a special plastic material that is resistant to the corrosive effects of humidity and most chemical gases

Shipping Weight : 2 Kg

Estimated Lead Time : In stock. Usually ships in 1-10 working days.

Manufacturer : Honeywell

Product No. : 51304362-350

Product type : Serial Interface I/O Processor

Non CE Compliant Part Number : N/A

CE Compliant Part Number : 51304362-350

Description : Serial Interface (SI)

IOPs Conformally Coated

Serial Interface Processor (16 Points/Port)

Conformally coated assemblies are completely covered with a thin layer of a special plastic material that is resistant to the corrosive effects of humidity and most chemical gases

Weight : 0.58 Kg

Shipping Weight : 2 Kg

Estimated Lead Time: 4 Weeks

Manufacturer: Honeywell

51304386-150

Model Number : MC-PPIX02

Non CE Compliant Part Number : N/A

CE Compliant Part Number : 51304386-150

Description : Pulse Input (PI)

IOPs Conformally Coated

Pulse Input Processor (8 Inputs)

Conformally coated assemblies are completely covered with a thin layer of a special plastic material that is resistant to the corrosive effects of humidity and most chemical gases

Shipping Weight : 2 Kg

Estimated Lead Time : 7 - 10 working days.

Manufacturer: Honeywell

Product No : 51304419-150

Product type : Standard I/O Link Extender Card

Model Number : MC-IOLM02

Non CE Compliant Part Number : N/A

CE Compliant Part Number : 51304419-150

I/O Link Extender

Conformally coated assemblies are completely covered with a thin layer of a special plastic material that is resistant to the corrosive effects of humidity and most chemical gases

I/O Link Extender Pair?Main Location

Shipping Weight : 2 Kg

Estimated Lead Time: 4-6 Weeks

Manufacturer: Honeywell

51304439-125

120 Vac Digital Input with compression terminals

Mounting and Operating the HPM

FTA Type:120 Vac DI

Model Number: MU-TDIA12

Non-CE Compliant Part Number:51304439-100

CE Compliant Part Number:51304439-125

Field Termination Assemblies Nonconformally Coated, Continued

120 Vdc Digital Input

Terminal Type: C

Channels Mounting : 32

Size : c

Shipping Weight: 1 Kg

Estimated Lead Time: 4 Weeks

Manufacturer: Honeywell

51304481-150

Model Number : MC-PAIL02

Non CE Compliant Part Number : N/A

CE Compliant Part Number : 51304481-150

Description : Low level Analog Input (LLAI)

IOPs Conformally Coated

Low Level Analog Input Processor (8 Inputs)

Conformally coated assemblies are completely covered with a thin layer of a special plastic material that is resistant to the corrosive effects of humidity and most chemical gases

Shipping Weight : 2 Kg

Estimated Lead Time : 1 - 2 weeks.

Manufacturer: Honeywell

Product No. : 51304485-150

Product type :

Estimated Lead Time : 7 - 10 working days.

Manufacturer: Honeywell

Product No : 51304487-150

Product type : Digital Output (DO)

Model Number : MC-PDOX02

Non CE Compliant Part Number : N/A

CE Compliant Part Number : 51304487-150

IOPs Conformally Coated

Conformally coated assemblies are completely covered with a thin layer of a special plastic material that is resistant to the corrosive effects of humidity and most chemical gases

Digital Output Processor (16 Outputs)

Shipping Weight : 2 Kg

Estimated Lead Time : 5 - 7 working days.

Manufacturer : Honeywell

Product No. : 51304516-250

Product type : MC-PSTX03 Smart Transmitter Interface Multivariable (STIM)

Coated Model Number : MC-PSTX03

Processor (16 Inputs)

Model Number : MC-PSTX03

Non CE Compliant Part Number : N/A

CE Compliant Part Number : 51304516-250

Description : Smart Transmitter Interface Multivariable (STIM)

The CE Compliant models have three unique features. They are Filtered backpanel IOP connectors, IOP connector ground panel(s), Rear backpanel shield

Weight : 0.73 Kg

Shipping Weight : 2 Kg

Estimated Lead Time : 5 - 7 working days.

Manufacturer : Honeywell

Product No. : 51304754-150

Product type : MC-PAIH03 High Level Analog Input Processor-16 Inputs

FTA Models: MU-TAIH02, TAIH12, TAIH52, TAIH03, TAIH13, TAIH23, TAIH53, TAIH22, TAIH62

Input Type: Voltage, current (2-wire or self-powered transmitters)

Input Channels : 16 differential input channels

Common Mode Rejection Ratio, dc to 60 Hz (500 source imbalance): 70 dB

Common Mode Voltage, dc to 60 Hz(1): -6 to +5 V peak

A/D Converter Resolution: 16 bits (14 bits used)

Input Range 0 to 5 V, 1 to 5 V, 0.4 to 2 V, 4-20 mA (through 250 )

Normal Mode Rejection Ratio, at 60 Hz: 32 dB

Normal Mode Filter Response : Single-pole RC, -3 dB @ 1 Hz

Maximum Normal Mode Input(differential inputs, no damage):

Estimated Lead Time : 3 - 4 Weeks

Manufacturer: Honeywell

Product No. : 51305890-175

Product type : Low Level Input Multiplexer

MC-TAMT04

LL Mux TC FTA

Circuits : 16

Size : 12

Parameter: FTA Models(1)

TC operation

Remote cold junction capability

1 Second PV scanning with OTD protection

Configurable OTD protection

64 fully-isolated channel-to-channel, channel-to-PM, and channel-to-power supply common in 16 channel increments.

CE compliant, conformally coated

Solid State

Temperature points can be added in 16 point increments

Weight : 0.85 Kg

Shipping Weight : 2 Kg

Estimated Lead Time : 1 - 2 weeks.

Manufacturer: Honeywell

Product No. : 51308111-002

Product type : Cable Set LCN Coax 2m

MARKED "CABLE" Y "CORD B"; Mark 1

RG59 with ferrites.

TBD

Shipping Weight : 2 Kg

Estimated Lead Time:

Estimated Lead Time : 4 - 6 weeks.

Manufacturer: Honeywell

Product No : 51309204-175 / MC-TLPA02

Product type : Power Adapter

Shipping Weight : 1.5 Kg

Estimated Lead Time : 5 - 7 working days.

Manufacturer : Honeywell

Product No. : 51402625-175

Product Type : MC-PDIS12 Digital Input Sequence of Events (DI)

Non CE Compliant Part Number : N/A

CE Compliant Part Number : 51402625-175

Description : Digital Input Sequence of Events (DI)

IOPs Conformally Coated

Conformally coated assemblies are completely covered with a thin layer of a special plastic material that is resistant to the corrosive effects of humidity and most chemical gases

Digital Input Processor for Sequence of Events (32 Inputs)

Weight : 0.45 Kg

Shipping Weight : 2 Kg

51404453-501

Manufacturer : Honeywell

Printed Circuit Assembly, Record Only

Shipping Weight : 1 Kg

Estimated Lead Time: 5-7 Working Days

Manufacturer : Honeywell

Product No : 51404459-501

Product type : Display Module Printed Circuit Assembly

Shipping Weight : 1 Kg

Estimated Lead Time : 1 - 2 weeks.

Manufacturer: Honeywell

Product No. : 51405098-100

Product type : LCNP4E card

Shipping Weight : 2 Kg

Estimated Lead Time: 4 Weeks

Manufacturer: Honeywell

Model Number : MC-PAOY22

Non CE Compliant Part Number: N/A

CE Compliant Part Number: 80363969-150

IOP Type : Analog Output (AO)

Coated Model Number:Analog Output 16 Processor (16 Outputs)

Shipping Weight: 1.5 Kg

Estimated Lead Time : 5 - 7 working days.

Manufacturer: Honeywell

Model Number : 80363972-150 

Product type : MC-PDIY22 Digital Input 24 Vdc Processor

Non CE Compliant Part Number : N/A

CE Compliant Part Number :80363972-150

Description : Digital Input (DI)

High-Performance Process Manager Planning

conformally coated High-Performance Process

model list: Manager assemblies

Digital Input 24 Vdc Processor (32 Inputs)

Weight : 0.51 Kg

Shipping Weight : 2 Kg

Estimated Lead Time: 2 - 3 weeks.

Manufacturer: Honeywell

Product No : MC-TAOY22

Product type : Analog Output with compression terminals

Shipping Weight : 1.5 Kg

Estimated Lead Time : 2-3 Weeks

Manufacturer : ABB

Manufacturer: ABB

Control I/O Slave Module (IMCIS02)

The Control I/O Slave module (IMCIS02) brings process field signals into the Infi 90 Process Management System, and outputs Infi 90 signals to the process.

Master modules use this I/O to monitor and control a process.

This instruction explains the slave module features, specifications and operation.

It details the procedures to follow to set-up and install a Control I/O Slave (CIS) module. It explains troubleshooting, maintenance and module replacement procedures.

The system engineer or technician using the CIS should read and understand this instruction before installing and operating the slave

Shipping Weight: 1 Kg