Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code: BES00MH
BES 516-3048-G-E4-C-S26-00,3
Dimensions : D03.0
Connection : Cable with connector, PUR, 0.30 m M05x0.5-S26
Output function : PNP, Normally open (NO)
Supply voltage : 21.6?26.4 V
Special Properties : miniature
Mech. installation condition : Non embeddable
Rated operating distance Sn [mm] : 3.00 mm
Additional text : Non-flush mounting (unshielded): See installation instructions for inductive sensors with extended range 843281. Avoid pressure and contactin the area of the clear zone cap.
The sensor is functional again after the overload has been eliminated.
EMC: For operating conditions with noise factors; external protectioncircuit required. Document 825345.
When using an AC bridge, an electrolytic capacitor ? 10
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code: BES00ML
BES 516-324-E3-C-02
Dimensions : M08x1
Connection : Cable, PVC, 2.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code: BES00MN
BES 516-324-E3-C-PU-02
Dimensions : M08x1
Connection : Cable, PUR, 2.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code: BES00MR
BES 516-324-E3-C-PU-05
Dimensions : M08x1
Connection : Cable, PUR, 5.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULusBasic standard : IEC 60947-5-2
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Function indicator : Yes
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code: BES00MT
BES 516-324-E3-C-S4-00,3
Dimensions : M08x1
Connection : Cable with connector, PUR, 0.30 m M12x1-S04
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code: BES00MU
BES 516-324-E3-C-S49-00,3
Dimensions : M08x1
Connection : Cable with connector, PUR, 0.30 m M08x1-S49
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code: BES00MW
BES 516-324-E4-C-01
Dimensions : M08x1
Connection : Cable, PVC, 1.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code: BES00MY
BES 516-324-E4-C-02
Dimensions : M08x1
Connection : Cable, PVC, 2.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code: BES00MZ
BES 516-324-E4-C-03
Dimensions : M08x1
Connection : Cable, PVC, 3.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code: BES00N0
BES 516-324-E4-C-05
Dimensions : M08x1
Connection : Cable, PVC, 5.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code: BES00N4
BES 516-324-E4-C-PU-02
Dimensions : M08x1
Connection : Cable, PUR, 2.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code: BES00N5
BES 516-324-E4-C-PU-03
Dimensions : M08x1
Connection : Cable, PUR, 3.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code: BES00N6
BES 516-324-E4-C-PU-05
Dimensions : M08x1
Connection : Cable, PUR, 5.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code: BES00N7
BES 516-324-E4-C-PU-08
Dimensions : M08x1
Connection : Cable, PUR, 8.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULusBasic standard : IEC 60947-5-2
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Function indicator : Yes
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code: BES00N8
BES 516-324-E4-C-S4-00,2
Dimensions : M08x1
Connection : Cable with connector, PUR, 0.20 m M12x1-S04
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code: BES00N9
BES 516-324-E4-C-S4-00,3
Dimensions : M08x1
Connection : Cable with connector, PUR, 0.30 m M12x1-S04
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code: BES00NA
BES 516-324-E4-C-S4-00,5
Dimensions : M08x1
Connection : Cable with connector, PUR, 0.50 m M12x1-S04
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code: BES00NE
BES 516-324-E4-C-S4-01
Dimensions : M08x1
Connection : Cable with connector, PUR, 1.00 m M12x1-S04
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULusBasic standard : IEC 60947-5-2
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Function indicator : Yes
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable with connector
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
-
Estimated Lead Time: 4-6 Weeks
-
BES00NF
-
Manufacturer: Balluff
-
Shipping Weight (Kg): 1
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00NJ
BES 516-324-E4-C-S49-00,2
Dimensions : M08x1
Connection : Cable with connector, PUR, 0.20 m M08x1-S49
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable with connector
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00NK
BES 516-324-E4-C-S49-00,3
Dimensions : M08x1
Connection : Cable with connector, PUR, 0.30 m M08x1-S49
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 1.50 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable with connector
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00NR
BES 516-324-G-E4-C-02
Dimensions : M08x1
Connection : Cable, PVC, 2.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 2.00 mm
Additional text : Embeddable: See installation notes for inductive sensors with extended switching distance 825357.
The sensor is functional again after the overload has been eliminated.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00NT
BES 516-324-G-E4-C-03
Dimensions : M08x1
Connection : Cable, PVC, 3.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 2.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Embeddable: See installation notes for inductive sensors with extended switching distance 825357.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00NU
BES 516-324-G-E4-C-10
Dimensions : M08x1
Connection : Cable, PVC, 10.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 2.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Embeddable: See installation notes for inductive sensors with extended switching distance 825357.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00NY
BES 516-324-G-E4-C-PU-02
Dimensions : M08x1
Connection : Cable, PUR, 2.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 2.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Embeddable: See installation notes for inductive sensors with extended switching distance 825357.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00NZ
BES 516-324-G-E4-C-PU-03
Dimensions : M08x1
Connection : Cable, PUR, 3.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 2.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Embeddable: See installation notes for inductive sensors with extended switching distance 825357.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00P0
BES 516-324-G-E4-C-PU-05
Dimensions : M08x1
Connection : Cable, PUR, 5.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 2.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Embeddable: See installation notes for inductive sensors with extended switching distance 825357.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00P2
BES 516-324-G-E4-C-S4-00,3
Dimensions : M08x1
Connection : Cable with connector, PUR, 0.30 m M12x1-S04
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 2.00 mm
Additional text : Embeddable: See installation notes for inductive sensors with extended switching distance 825357.
The sensor is functional again after the overload has been eliminated.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable with connector
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00P3
BES 516-324-G-E4-C-S49-00,2
Dimensions : M08x1
Connection : Cable with connector, PUR, 0.20 m M08x1-S49
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 2.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Embeddable: See installation notes for inductive sensors with extended switching distance 825357.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable with connector
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00P4
BES 516-324-G-E4-C-S49-00,3
Dimensions : M08x1
Connection : Cable with connector, PUR, 0.30 m M08x1-S49
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 2.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Embeddable: See installation notes for inductive sensors with extended switching distance 825357.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable with connector
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00P5
BES 516-324-G-E4-C-S49-00,5
Dimensions : M08x1
Connection : Cable with connector, PUR, 0.50 m M08x1-S49
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 2.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Embeddable: See installation notes for inductive sensors with extended switching distance 825357.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable with connector
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00P7
BES 516-324-G-E5-C-S49
Dimensions : M08x1
Connection : Connector, M08x1-S49
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 2.00 mm
Additional text : Embeddable: See installation notes for inductive sensors with extended switching distance 825357.
The sensor is functional again after the overload has been eliminated.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Connector
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00P8
BES 516-325-E4-C-02
Dimensions : M12x1
Connection : Cable, PVC, 2.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 2.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00P9
BES 516-325-E4-C-03
Dimensions : M12x1
Connection : Cable, PVC, 3.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 2.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00PA
BES 516-325-E4-C-05
Dimensions : M12x1
Connection : Cable, PVC, 5.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 2.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00PC
BES 516-325-E4-C-PU-03
Dimensions : M12x1
Connection : Cable, PUR, 3.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 2.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00PE
BES 516-325-E4-C-PU-05
Dimensions : M12x1
Connection : Cable, PUR, 5.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 2.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
- Estimated Lead Time: 4-6 Weeks
- BES00PF
- Manufacturer: Balluff
- PNP
- Normally open (NO)
- 1.80 mm
- Flush (shielded)
- Cable, PUR, 8.00 m
- Shipping Weight (Kg): 1
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00PH
BES 516-325-E4-C-S4-00,5
Dimensions : M12x1
Connection : Cable with connector, PUR, 0.50 m M12x1-S04
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 2.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : cULus
CE
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable with connector
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Inductive sensor
BES 516-325-E5-C-S4
BES00PK
PNP
Normally open (NO)
2.00 mm
Flush (shielded)
Connector, M12x1-S04
General attributes
Approvals / Conformity : cULus
CE
EAC
Basic standard : IEC 60947-5-2
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Function indicator : Yes
Polarity reversal protected : Yes
Power indicator : No
Protection Class : II
Short circuit protected : Yes
MTTF : 640 a
Electrical attributes
Mech. installation condition
Connection type : Connector
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500 ?F
Max. no-load cur. Io undamped : 2.5 mA
Minimum operating current Im : 0 mA
No-load current Io damped max. : 6.0 mA
Operating voltage UB max. DC [V] : 30.0 V
Operating voltage UB min. DC [V] : 10.0 V
Rated insulation voltage Ui : 250 VAC
Rated short circuit current : 100 A
Ripple max. (% of Ue) : 15 %
Switching freq. f max. (at Ue) : 5000 Hz
Switching function : Normally open (NO)
Switching output : PNP
Voltage drop static max. : 2.5 V
Mechanical attributes
Ambient temperature Ta max. : 70 ?C
Ambient temperature Ta min. : -25 ?C
Assured operating distance Sa : 1.60 mm
Connector type : M12x1-S04
Depth : 45.0 mm
Diameter d1 : M12x1
Eff. operating distance Sr : 2.00 mm
Housing material : CuZn
Flush (shielded) :
Mounting length : 29.5 mm
Rated operating distance Sn [mm] : 2.00 mm
Sensing face material : LCP
Surface protection : Nickel-free coating
Tightening torque : 10 Nm
Remarks : The sensor is functional again after the overload has been eliminated.For further information on MTTF/B10d, please refer to the MTTF / B10d Certificate.Specification of the MTTF value and the B10d value do not represent any binding qualityand/or life expectancy guarantees.
- Shipping Weight : 1 Kg
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00PL
BES 516-325-G-E4-C-02
Dimensions : M12x1
Connection : Cable, PVC, 2.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 4.00 mm
Additional text : Embeddable: See installation notes for inductive sensors with extended switching distance 825357.
The sensor is functional again after the overload has been eliminated.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00PM
BES 516-325-G-E4-C-03
Dimensions : M12x1
Connection : Cable, PVC, 3.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 4.00 mm
Additional text : Embeddable: See installation notes for inductive sensors with extended switching distance 825357.
The sensor is functional again after the overload has been eliminated.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00PN
BES 516-325-G-E4-C-05
Dimensions : M12x1
Connection : Cable, PVC, 5.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 4.00 mm
Additional text : Embeddable: See installation notes for inductive sensors with extended switching distance 825357.
The sensor is functional again after the overload has been eliminated.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00PP
BES 516-325-G-E4-C-PU-02
Dimensions : M12x1
Connection : Cable, PUR, 2.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 4.00 mm
Additional text : Embeddable: See installation notes for inductive sensors with extended switching distance 825357.
The sensor is functional again after the overload has been eliminated.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00PT
BES 516-325-G-E4-C-PU-05
Dimensions : M12x1
Connection : Cable, PUR, 5.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 4.00 mm
Additional text : Embeddable: See installation notes for inductive sensors with extended switching distance 825357.
The sensor is functional again after the overload has been eliminated.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00PU
BES 516-325-G-E4-C-S4-00,1
Dimensions : M12x1
Connection : Cable with connector, PUR, 0.10 m M12x1-S04
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 4.00 mm
Additional text : Embeddable: See installation notes for inductive sensors with extended switching distance 825357.
The sensor is functional again after the overload has been eliminated.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable with connector
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00PW
BES 516-325-G-E4-C-S4-00,5
Dimensions : M12x1
Connection : Cable with connector, PUR, 0.50 m M12x1-S04
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 4.00 mm
Additional text : Embeddable: See installation notes for inductive sensors with extended switching distance 825357.
The sensor is functional again after the overload has been eliminated.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Cable with connector
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00PY
BES 516-325-G-E5-C-S4
Dimensions : M12x1
Connection : Connector, M12x1-S04
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 4.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : cULus
CE
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 640 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Protection Class : II
Short circuit protected : Yes
Connection type : Connector
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00PZ
BES 516-325-G-E5-C-S49
Dimensions : M12x1
Connection : Connector, M08x1-S49
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 4.00 mm
Additional text : Embeddable: See installation notes for inductive sensors with extended switching distance 825357.
The sensor is functional again after the overload has been eliminated.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP67
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Short circuit protected : Yes
Connection type : Connector
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 0.500
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00R0
BES 516-326-E4-C-02
Dimensions : M18x1
Connection : Cable, PVC, 2.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 5.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP67
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 1.000
Condition : Brand New
Warranty : 1 Year
Product Number : BES 516-326-E4-C-03
Manufacturer : Balluff
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00R2
BES 516-326-E4-C-05
Dimensions : M18x1
Connection : Cable, PVC, 5.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 5.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP67
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 1.000
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00R3
BES 516-326-E4-C-PU-03
Dimensions : M18x1
Connection : Cable, PUR, 3.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 5.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : cULus
CE
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP67
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 1.000
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00R4
BES 516-326-E4-C-PU-05
Dimensions : M18x1
Connection : Cable, PUR, 5.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 5.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP67
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 1.000
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00R5
BES 516-326-E4-C-S4-00,2
Dimensions : M18x1
Connection : Cable with connector, PUR, 0.20 m M12x1-S04
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 5.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP67
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Short circuit protected : Yes
Connection type : Cable with connector
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 1.000
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00R6
BES 516-326-E5-C-S4
Dimensions : M18x1
Connection : Connector, M12x1-S04
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 5.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP67
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 830 a
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Short circuit protected : Yes
Connection type : Connector
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 1.000
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00R9
BES 516-326-G-E4-C-PU-05
Dimensions : M18x1
Connection : Cable, PUR, 5.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 8.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Embeddable: See installation notes for inductive sensors with extended switching distance 825357.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 330 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 1.000
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00RA
BES 516-326-G-E4-C-S4-00,3
Dimensions : M18x1
Connection : Cable with connector, PUR, 0.30 m M12x1-S04
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 8.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Embeddable: See installation notes for inductive sensors with extended switching distance 825357.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP67
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 330 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Short circuit protected : Yes
Connection type : Cable with connector
Eff. operating current Ie : 200 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 1.000
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00RC
BES 516-326-G-E5-C-S4
Dimensions : M18x1
Connection : Connector, M12x1-S04
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 8.00 mm
Additional text : Embeddable: See installation notes for inductive sensors with extended switching distance 825357.
The sensor is functional again after the overload has been eliminated.Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP67
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 1620 a
Operating distance marking : ??
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Short circuit protected : Yes
Connection type : Connector
Eff. operating current Ie : 130 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 1.000
Estimated Lead Time: 4-6 Weeks
Manufacturer: Balluff
Order code : BES00RH
BES 516-327-E4-Y-03
Dimensions : M30x1.5
Connection : Cable, PVC, 3.00 m
Output function : PNP, Normally open (NO)
Supply voltage : 10.0?30.0 V
Mech. installation condition : Flush (shielded)
Rated operating distance Sn [mm] : 10.00 mm
Additional text : The sensor is functional again after the overload has been eliminated.
Approvals / Conformity : CE
cULus
EACBasic standard : IEC 60947-5-2
Diagnostic Coverage : 0 %
Enclosure Type per IEC 60529 : IP68 according to BWN PR 20
Functional Safety : No
Function indicator : Yes
Mission Time : 20 a
MTTF (40?C) : 1620 a
Polarity reversal protected : Yes
Power indicator : No
Product group : Inductive sensor
Short circuit protected : Yes
Connection type : Cable
Eff. operating current Ie : 130 mA
Eff. operating voltage Ue DC : 24.0 V
Electrical version : DC, direct current
Load capacitance max. (at Ue) : 1.000