Estimated Lead Time : In stock. Usually ships in 7-10 working days.
Manufacturer : Mitsubishi Electric
FX1N-40MR-D
FX1N series FX1N-40MR-D
Arithmetic control method : Stored program iterative calculation method with interrupt instruction
Input / output control method : Batch processing method (when END instruction is executed), I / O refresh command, with pulse catch function
Programming language : Relay symbol method + step ladder method (SFC expressible)
Program memory Maximum memory capacity : 8000 step comments, maximum 8000 steps including file register
Internal memory capacity / format : 8000 steps EEPROM (memory backup not required)
Memory cassette (memory board) : FX1N-EEPROM-8L (8000 step EEPROM)
Write function during RUN : Yes (program changeable during sequencer RUN)
Protection function : With password protection function (by keyword function)
Real time clock Clock function : Built-in 1980 to 2079 (with leap year correction) 2-digit / 4-digit year AD changeable, monthly difference ± 45 seconds (25 ° C) ※ Note on clock function The current time of the built- It is backed up with. The large capacity condenser (built-in) is fully charged at the energization time of 30 minutes and holds the present value for 10 days. Also, you can hold it with a battery by using an optional battery.
Types of instructions Basic instruction : . Sequence instruction: 27 pieces . Step ladder command: 2 pieces
Application instruction : Application instruction: 89 kinds
Arithmetic processing speed Basic instruction : 0.55 to 0.7 μs / instructions
Application instruction : 3.7 to several 100 μs / instructions
Number of input / output points Number of input points : 128 points or less (at the time of addition and extension use) However, the input / output total is 128 points or less
Number of output points : 128 points or less (at the time of addition and extension use) However, the input / output total is 128 points or less
Number of remote I / O points (CC - Link) : 128 points or less including real I / O
Total score : 128 points or less (when adding together)
device I / O relay Input relay : X000 to X177 128 points (octal number) When added and used
Output relay : Y000 to Y177 128 points (octal number) When added and used
Auxiliary relay For general use : M 0 to M 383 384 points
Keep (EEPROM keep) : M384 to M511 128 points ※ Note on keeping area Keep area and nonkeeping area are fixed. (Parameter can not be changed.) In order to reliably keep to EEPROM, it is necessary for the sequencer to be energized for at least 5 consecutive minutes.
Keep (capacitor keep) : M512 to M1535 1024 points ※ Note on keeping area Keep area and nonkeeping area are fixed. (Parameter can not be changed.) Large capacity condenser (built-in) will be fully charged at 30 minutes of energization time and hold the present value for 10 days. If the voltage of the large capacity capacitor decreases, the state of the capacitor keeping device may not be held correctly. Please initialize the capacitor keep device when using for the first time after purchasing the FX1N series sequencer or after using it for a long time not to turn on the power supply. Before resuming operation, please set the device and current time required for driving.
Special purpose : M8000 to M8255 256 points
State Initial state (EEPROM keep) : S0 to S9 10 points ※ Note on keeping area Keep area and nonkeeping area are fixed. (Parameter can not be changed.) In order to reliably keep to EEPROM, it is necessary for the sequencer to be energized for at least 5 consecutive minutes.
Keep (EEPROM keep) : S10 to S127 118 points ※ Note on Keep Area Keep area and non-keep area are fixed. (Parameter can not be changed.) In order to reliably keep to EEPROM, it is necessary for the sequencer to be energized for at least 5 consecutive minutes.
Keep (capacitor keep) : S128 to S999 872 points ※ Note on keeping area Keep area and nonkeeping area are fixed. (Parameter can not be changed.) Large capacity condenser (built-in) will be fully charged at 30 minutes of energization time and hold the present value for 10 days. If the voltage of the large capacity capacitor decreases, the state of the capacitor keeping device may not be held correctly. Please initialize the capacitor keep device when using for the first time after purchasing the FX1N series sequencer or after using it for a long time not to turn on the power supply. Before resuming operation, please set the device and current time required for driving.
Timer (on-delay) 100 ms : T0 to T199 200 points (0.1 to 3,276.7 seconds)
10 ms : T200 to T245 46 points (0.01 to 327.67 seconds)
1 ms integration type (capacitor keep) : T246 to T249 4 points (0.001 to 32.767 seconds) * Note on Keep Area Keep area and non-keep area are fixed. (Parameter can not be changed.) Large capacity condenser (built-in) will be fully charged at 30 minutes of energization time and hold the present value for 10 days. If the voltage of the large capacity capacitor decreases, the state of the capacitor keeping device may not be held correctly. Please initialize the capacitor keep device when using for the first time after purchasing the FX1N series sequencer or after using it for a long time not to turn on the power supply. Before resuming operation, please set the device and current time required for driving.
100 ms integration type (capacitor keep) : T250 to T255 6 points (0.1 to 3,276.7 seconds) * Note on Keep Area Keep area and non-keep area are fixed. (Parameter can not be changed.) Large capacity condenser (built-in) will be fully charged at 30 minutes of energization time and hold the present value for 10 days. If the voltage of the large capacity capacitor decreases, the state of the capacitor keeping device may not be held correctly. Please initialize the capacitor keep device when using for the first time after purchasing the FX1N series sequencer or after using it for a long time not to turn on the power supply. Before resuming operation, please set the device and current time required for driving.
Other : Two internal analog volume can be used as analog timer VR 1: D 8030, VR 2: D 8031 ??2 points (0 to 255)
counter 16 bit up : C 0 to C 15 16 points (0 to 32,767 counts)
16 bit up (EEPROM keep) : C16 to C31 16 points (0 to 32,767 counts) * Note on keep area Keep area and non-keep area are fixed. (Parameter can not be changed.) In order to reliably keep to EEPROM, it is necessary for the sequencer to be energized for at least 5 consecutive minutes.
16 bit up (capacitor keep) : C32 to C199 168 points (0 to 32,767 counts) * Note on keeping area Keep area and nonkeeping area are fixed. (Parameter can not be changed.) Large capacity condenser (built-in) will be fully charged at 30 minutes of energization time and hold the present value for 10 days. If the voltage of the large capacity capacitor decreases, the state of the capacitor keeping device may not be held correctly. Please initialize the capacitor keep device when using for the first time after purchasing the FX1N series sequencer or after using it for a long time not to turn on the power supply. Before resuming operation, please set the device and current time required for driving.
32 bit up / down : C200 to C219 20 points (-2, 147, 483, 648 to +2, 147, 483, 647 counts)
32 bit up / down (capacitor keep) : C220 to C234 15 points (-2, 147, 483, 648 to +2, 147, 483, 647 counts) * Note on Keep Area Keep area and nonkeeping area are fixed. (Parameter can not be changed.) Large capacity condenser (built-in) will be fully charged at 30 minutes of energization time and hold the present value for 10 days. If the voltage of the large capacity capacitor decreases, the state of the capacitor keeping device may not be held correctly. Please initialize the capacitor keep device when using for the first time after purchasing the FX1N series sequencer or after using it for a long time not to turn on the power supply. Before resuming operation, please set the device and current time required for driving.
High speed counter : [32-bit high-speed up / down (EEPROM Keep)] C235 ~ C255 1 phase: 60 kHz, 10 kHz 2 phase: 30 kHz, 5 kHz there is a limit to the number and input frequency that can be used according to the conditions used. ※ Note on Keep Area Keep area and non-keep area are fixed. (Parameter can not be changed.) In order to reliably keep to EEPROM, it is necessary for the sequencer to be energized for at least 5 consecutive minutes.
Data register (32 bits in pair use) For 16-bit general purpose : D0 to D127 128 points
For 16-bit keep (EEPROM keep) : D128 to D255 128 points ※ Note on the keep area Keep area and non-keep area are fixed. (Parameter can not be changed.) In order to reliably keep to EEPROM, it is necessary for the sequencer to be energized for at least 5 consecutive minutes.
For 16-bit keep (capacitor keep) : D256 to D7999 7744 points ※ Note on Keep Area Keep area and non-keep area are fixed. (Parameter can not be changed.) Large capacity condenser (built-in) will be fully charged at 30 minutes of energization time and hold the present value for 10 days. If the voltage of the large capacity capacitor decreases, the state of the capacitor keeping device may not be held correctly. Please initialize the capacitor keep device when using for the first time after purchasing the FX1N series sequencer or after using it for a long time not to turn on the power supply. Before resuming operation, please set the device and current time required for driving.
File register (keep) : D1000 to D7999 Up to 7000 points (It can be set to program area (EEPROM) as file register in units of 500 points from D1000 according to parameters)
16 bit special use : D 8000 to D 8255 256 points
For 16 bit index : V 0 to V 7, Z 0 to Z 7 16 points
Pointer JUMP, for CALL branch : P0 to P127 128 points (for CJ instruction, CALL instruction, P63 for END jump)
Input interrupt : I00□ ~ I50□ 6 points
nesting : [For master control] N 0 to N 7 8 points (for MC command)
constant Decimal number (K) : 16 bits: -32,768 to + 32,767 32 bits: -2, 147, 483, 648 to +2, 147, 483, 647
Hexadecimal (H) : 16 bits: 0 to FFFF 32 bits: 0 to FFFFFFFF
Rated voltage : 12 to 24 VDC
Voltage tolerance range : DC 10.2 to 28.8 V
Rated frequency : -
Allowable momentary power outage time : Operation continues with an instantaneous blackout of 5 ms or less.
Power supply fuse : 125 V 3.15 A
Inrush current : Up to 25 A 1 ms or less / 24 VDC, 22 A maximum 0.2 ms or less / DC 12 V
power consumption : Includes 18 W input current (7 mA or 5 mA per point).
24 VDC service power supply : -
Input specification :
Number of input points : 24 points
Input connection shape : Removable terminal block (M3 screw)
Input format : sink
Input signal voltage : DC 24 V ± 10%
Input impedance X000 to X007 : 3.3 kΩ
X010 or later : 4.3 kΩ
Input signal current X000 to X007 : 7 mA / 24 VDC
X010 or later : 5 mA / 24 VDC
Input ON sensitivity current X000 to X007 : 4.5 mA or more
X010 or later : 3.5 mA or more
Input OFF sensitivity current : 1.5 mA or less
Input response time : Approximately 10 ms X000 to X007 have a built-in digital filter and can be changed in 1 ms increments to 0 to 15 ms by D8020. When 0 is specified, X000, X001 is 10 μs, and X002 to X007 is 50 μs.
Input signal format : No-voltage contact input NPN open collector transistor
Input circuit insulation : Photocoupler insulation
Input operation display : LED ON when input is ON
Number of output points : 16 points
Output connection shape : Terminal block (M3 screw)
Output type / format : Relay output
External power supply : AC 250 V DC 30 V or less
Maximum load Resistive load : 2A or less / per output 8 A or less / per COM terminal
Inductive load : 80VA
Minimum load : DC 5 V 2 mA (reference value)
Open-circuit leakage current : -
ON voltage : -
Response time OFF → ON : About 10 ms
ON → OFF : About 10 ms
Circuit insulation : Mechanical insulation
Output operation indication : LED lit when relay coil is energized
Built-in high speed counter function :
1 phase 1 count input : [C235, C236] Up to 2 points: Up to 60 kHz High speed comparison When using SET / RESET: 30 kHz [C237 to C245] Up to 4 points: Up to 10 kHz High speed comparison When using SET / RESET: 10 kHz Processed by high- The sum of the frequencies to be summed (2-phase counter adds twice the input frequency), the maximum is 60 kHz. High Speed ??Comparison When using SET / RESET, 30 kHz is the maximum for the sum of the frequencies processed by the sequencer with the high-speed counter and pulse density instruction (2-phase counter adds twice the input frequency).
1 phase 2 count input : [C246] Maximum 1 point: Up to 60 kHz High speed comparison When using SET / RESET: 30 kHz [C247 to C250] Up to 2 points: Up to 10 kHz High speed comparison When using SET / RESET: 10 kHz Frequency processed by the sequencer with high- (2-phase counter adds twice the input frequency), the maximum is 60 kHz. High Speed ??Comparison When using SET / RESET, 30 kHz is the maximum for the sum of the frequencies processed by the sequencer with the high-speed counter and pulse density instruction (2-phase counter adds twice the input frequency).
2 phase 2 count input : [C251] Maximum 1 point: Up to 30 kHz High speed comparison When using SET / RESET: 15 kHz [C252 to C255] Up to 2 points: Up to 5 kHz High speed comparison When using SET / RESET: 5 kHz Frequency processed by the sequencer with high- (2-phase counter adds twice the input frequency), the maximum is 60 kHz. High Speed ??Comparison When using SET / RESET, 30 kHz is the maximum for the sum of the frequencies processed by the sequencer with the high-speed counter and pulse density instruction (2-phase counter adds twice the input frequency).
Ambient temperature : 0 to 55 ° C. ... Operating, -20 to 70 ° C....when saved
Relative humidity : 35 to 85% RH (noncondensing)...at operation
Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2
Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 Ten times in each of X, Y, Z directions (80 minutes in total in total) The criterion is based on IEC 61131-2
Direct installation Frequency: 10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2
Frequency: 57 to 150 Hz : Acceleration: 9.8 m / s 2 X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2
Impact resistance : 147 m / s 2 , working time 11 ms, criterion for judgment three times in X, Y, Z directions by sine half-wave pulse is according to IEC 61131-2
Noise immunity : Noise voltage with 1,000 Vp-p, noise width 1 μs, rising 1 ns, with noise si
tor with period of 30 to 100 Hz
Withstand voltage : When performing the withstand voltage test, make the voltage between each terminal and the ground terminal of the basic unit as follows. Between power supply terminal (DC power supply) and earth terminal: 500 VAC for 1 minute Between output terminal (relay) and earth terminal: AC 1.5 kV 1 min
Insulation resistance : When conducting the insulation resistance test, perform the following voltage between each terminal and the ground terminal of the basic unit. Between power supply terminal (DC power supply) and earth terminal: 500 VDC DC insulation resistance meter 5 MΩ or more Output terminal (relay) and earth terminal: 500 VDC with insulation resistance meter 5 MΩ or more
ground : Class D grounding (grounding resistance: 100 Ω or less)Grounding must be dedicated ground or common ground.
Use atmosphere : There is no corrosive property, flammable gas, conductive dust (dust) is not serious
Use altitude : It can not be used under an environment pressurized to 2,000 m or less under atmospheric pressure. It may break down.
Shipping Weight : 1.7 Kg
Estimated Lead Time: 5-7 Working Days
Manufacturer: Mitsubishi Electric
-
FX1N-14MT-001
-
PLC type : FX1N
-
Total number of I / O channels : 14
-
Unit type : MPU - main unit
-
Output type : Transistor
-
Shipping Weight : 1.45 Kg
Estimated Lead Time: 5-7 Working Days
Manufacturer: Mitsubishi Electric
-
FX1N-14MT-ES/UL
-
FX1N Main Modules
-
Input : 8
-
Type: 24V DC Sick/Source
-
Output
-
Qty: 6(8)
-
Type : Transistor
-
Power Supply :12 V DC -15% to 24V DC +20%
-
Dimensions(mm) : 90 x 90 x 75
-
Weight: 0.45 Kg
-
Shipping Weight : 2 Kg
- Condition : Brand New
- Warranty : 1 Years
- Product Number : FX1N-24MR-001
- Manufacturer : Mitsubishi Electric
- Condition : Brand New
- Warranty : 1 Years
- Product Number :FX1N-24MR-ES/UL
- Manufacturer :Mitsubishi Electric
Estimated Lead Time: 5-7 Working Days
Manufacturer: Mitsubishi Electric
FX1N-24MT-001
The arithmetic and control system : Stored program repeat operation method, there interrupt instruction
Input and output control method : Batch processing method (END when the instruction is executed), input and output refresh command, Pulse catch function
Programming language : Relay symbol system + step ladder system (SFC representation Allowed)
Program memory : The maximum memory capacity : 8000 step
comment, up to 8000 steps, including the file registerBuilt-in memory capacity and format : 8000 step EEPROM (memory backup required)
Memory cassette (memory board) : FX1N-EEPROM-8L (8000 step EEPROM)
RUN during the write function : Yes (can change programs during the sequencer RUN)
Protective function : There is password protection function (by keyword function)
Real-time clock : Clock function : Built
from 1980 to 2079 years (with leap year correction) The year 2-digit / 4-digit switch, monthly deviation
Estimated Lead Time: 5-7 Working Days
Manufacturer: Mitsubishi Electric
-
FX1N-24MT-ES/UL
-
PLC type : FX1N
-
Total number of I / O channels: 24
-
Unit Type: MPU - main unit
-
Output type: Relay
-
Features : AC, World spec, CE registered
-
UL registered
-
Shipping Weight : 1.45 Kg
- Condition : Brand New
- Warranty : 1 Years
- Product Number :FX1N-40MR-001
- Manufacturer :Mitsubishi Electric
Estimated Lead Time: 5-7 Working Days
Manufacturer: Mitsubishi Electric
FX1N-40MT-001
The arithmetic and control system : Stored program repeat operation method, there interrupt instruction
Input and output control method : Batch processing method (END when the instruction is executed), input and output refresh command, Pulse catch function
Programming language : Relay symbol system + step ladder system (SFC representation Allowed)
Program memory : The maximum memory capacity : 8000 step comment, up to 8000 steps, including the file register
Built-in memory capacity and format : 8000 step EEPROM (memory backup required)
Memory cassette (memory board) : FX1N-EEPROM-8L (8000 step EEPROM)
RUN during the write function : Yes (can change programs during the sequencer RUN)
Protective function : There is password protection function (by keyword function)
Real-time clock : Clock function : Built from 1980 to 2079 years (with leap year correction) The year 2-digit / 4-digit switch, monthly deviation
Estimated Lead Time: 5-7 Working Days
Manufacturer: Mitsubishi Electric
-
FX1N-40MT-ES/UL
-
PLC type : FX1N
-
Total number of I / O channels : 40
-
Unit type : MPU - main unit
-
Output type : Transistor
-
Features : AC, World spec, CE registered
-
UL registered
-
Shipping Weight : 1.65 Kg
Estimated Lead Time: 5-7 Working Days
Manufacturer: Mitsubishi Electric
FX1N-60MT-001
The arithmetic and control system : Stored program repeat operation method, there interrupt instruction
Input and output control method : Batch processing method (END when the instruction is executed), input and output refresh command, Pulse catch function
Programming language : Relay symbol system + step ladder system (SFC representation Allowed)
Program memory : The maximum memory capacity : 8000 step comment, up to 8000 steps, including the file register
Built-in memory capacity and format : 8000 step EEPROM (memory backup required)
Memory cassette (memory board) : FX1N-EEPROM-8L (8000 step EEPROM)
RUN during the write function : Yes (can change programs during the sequencer RUN)
Protective function : There is password protection function (by keyword function)
Real-time clock : Clock function : Built from 1980 to 2079 years (with leap year correction) The year 2-digit / 4-digit switch, monthly deviation
Estimated Lead Time: 5-7 Working Days
Manufacturer: Mitsubishi Electric
-
FX1N-60MT-ES/UL
-
PLC type : FX1N
-
Total number of I / O channels : 60
-
Unit type : MPU - main unit
-
Output type : Transistor
-
Features : AC, World spec, CE registered.
-
UL registered
-
+10%, ?15%
-
Operation continues for an instantaneous power failure time of 5 ms or less.
-
Consumption of electricity: 24 W
-
Arithmetic control method: Stored program iterative calculation method with interrupt instruction
-
Weight : 0.80 Kg
-
Shipping Weight : 1.8 Kg
Estimated Lead Time : In stock. Usually ships in 7-10 working days.
Manufacturer : Mitsubishi Electric
FX1S-10MT-001
FX1S series FX1S-10MT-001
Arithmetic control method : Stored program iterative calculation method with interrupt instruction
Input / output control method : Batch processing method (when END instruction is executed), I / O refresh command, with pulse catch function
Programming language : Relay symbol method + step ladder method (SFC expressible)
Program memory Maximum memory capacity : 2000 step comment, up to 2000 steps including file register
Internal memory capacity / format : 2000 step EEPROM (memory backup not required)
Memory cassette (memory board) : FX1N-EEPROM-8L (8000 step EEPROM: FX1S can only use 2000 steps)
Write function during RUN : Yes (program changeable during sequencer RUN)
Protection function : With password protection function (by keyword function)
Real time clock Clock function : Built-in 1980 to 2079 (with leap year correction) 2-digit / 4-digit year AD changeable, monthly difference ± 45 seconds (25 ° C) ※ Note on clock function The current time of the built- It is backed up with. The large capacity condenser (built-in) is fully charged at the energization time of 30 minutes and holds the present value for 10 days.
Types of instructions Basic instruction : . Sequence instruction: 27 pieces . Step ladder command: 2 pieces
Application instruction : Application instruction: 85 species
Arithmetic processing speed Basic instruction : 0.55 to 0.7 μs / instructions
Application instruction : 3.7 to several 100 μs / instructions
Number of input / output points Number of input points : 16 points or less (according to input specifications) can not be added
Number of output points : 14 points or less (due to output specification) Can not be added
Total score : 30 points or less (according to input / output specification) can not be added
device I / O relay Input relay : X000 to X017 16 points (octal number) can not be expanded (FX1S - 10M□ corresponds to the range from X000 to X005)
Output relay : Y000 - Y015 14 points (octal number) can not be expanded (FX1S - 10M□ corresponds to Y000 - Y003 range)
Auxiliary relay For general use : M 0 to M 383 384 points
For keeping : M384 to M511 128 points ※ Note on keeping area Keep area and nonkeeping area are fixed. (Parameter can not be changed.) In order to reliably keep to EEPROM, it is necessary for the sequencer to be energized for at least 5 consecutive minutes.
Special purpose : M8000 to M8255 256 points
State Initial state : S0 to S9 10 points
For keeping : All points of power failure hold (S 0 to S 127) * Note on keep area Keep area and non-keep area are fixed. (Parameter can not be changed.) In order to reliably keep to EEPROM, it is necessary for the sequencer to be energized for at least 5 consecutive minutes.
Timer (on-delay) 100 ms : T 0 to T 62 63 points (0.1 to 3,276.7 seconds)
10 ms : When M8028 is turned ON, T32 to T62 (31 points) can be changed to 10ms timer (0.01 to 327.67 seconds)
1 ms : T63 1 point (0.001 to 32.767 seconds)
Other : Two internal analog volume can be used as analog timer VR 1: D 8030, VR 2: D 8031 ??2 points (0 to 255)
counter 16 bit up : C 0 to C 15 16 points (0 to 32,767 counts)
16 bit up (keep) : C16 to C31 16 points (0 to 32,767 counts) (EEPROM keeping) * Note on keeping area Keep area and nonkeeping area are fixed. (Parameter can not be changed.) In order to reliably keep to EEPROM, it is necessary for the sequencer to be energized for at least 5 consecutive minutes.
High speed counter : [32-bit high-speed up / down (EEPROM keep)] C235 to C255 1 phase: 60 kHz, 10 kHz 2 phases: 30 kHz, 5 kHz There are restrictions on the number of points and input frequencies that can be used depending on the conditions used. ※ Note on Keep Area Keep area and non-keep area are fixed. (Parameter can not be changed.) In order to reliably keep to EEPROM, it is necessary for the sequencer to be energized for at least 5 consecutive minutes.
Data register (32 bits in pair use) For 16-bit general purpose : D0 to D127 128 points
For 16 bit keeping : D 128 - D 255 128 points (EEPROM keep) * Note on keep area Keep area and non-keep area are fixed. (Parameter can not be changed.) In order to reliably keep to EEPROM, it is necessary for the sequencer to be energized for at least 5 consecutive minutes.
File register (keep) : D 1000 - D 2499 1500 points (File register can be set in 500 points units) (EEPROM keep)
16 bit special use : D 8000 to D 8255 256 points
For 16 bit index : V 0 to V 7, Z 0 to Z 7 16 points
Pointer JUMP, for CALL branch : P0 to P63 64 points (for CJ instruction, CALL instruction, P63 for END jump)
Input interrupt : I00□ ~ I50□ 6 points
nesting : [For master control] N 0 to N 7 8 points (for MC command)
constant Decimal number (K) : 16 bits: -32,768 to + 32,767 32 bits: -2, 147, 483, 648 to +2, 147, 483, 647
Hexadecimal (H) : 16 bits: 0 to FFFF 32 bits: 0 to FFFFFFFF
Rated voltage : AC 100 to 240 V
Voltage tolerance range : AC 85 - 264 V
Rated frequency : 50/60 Hz
Allowable momentary power outage time : Operation continues with an instantaneous blackout of 10 ms or less.
Power supply fuse : 250V 1A
Inrush current : Maximum 15 A 5 ms max. / AC 100 V, max 25 A up to 5 ms / AC 200 V
power consumption : Includes 19 W input current (7 mA per point, or 5 mA).
24 VDC service power supply : 400 mA
Input specification :
Number of input points : 6 points
Input connection shape : Terminal block (M3 screw)
Input format : sink
Input signal voltage : DC 24 V ± 10%
Input impedance X000 to X007 : 3.3 kΩ
X010 or later : -
Input signal current X000 to X007 : 7 mA / 24 VDC
X010 or later : -
Input ON sensitivity current X000 to X007 : 4.5 mA or more
X010 or later : -
Input OFF sensitivity current : 1.5 mA or less
Input response time : Approximately 10ms X000 to X017 (up to the basic unit built-in number) has a built-in digital filter and can be changed from 0 to 15 ms in 1 ms unit by D8020. When 0 is specified, X000, X001 is 10 μs, and X002 to X017 are 50 μs. (FX1S - 10M□ corresponds to the range from X000 to X005)
Input signal format : No-voltage contact input NPN open collector transistor
Input circuit insulation : Photocoupler insulation
Input operation display : LED ON when input is ON
Input circuit configuration
Number of output points : 4 points
Output connection shape : Terminal block (M3 screw)
Output type / format : Transistor / sink output
External power supply : DC 5 to 30 V
Maximum load Resistive load : 0.5 A or less / per output 0.8 A or less / per COM terminal
Inductive load : 12 W / DC 24 V
Minimum load : -
Open-circuit leakage current : 0.1 mA / DC 30 V
ON voltage : 1.5 V
Response time OFF → ON : Y000, Y001: 5 μs or less Y: after 200: less than 0.2 ms (100 mA / 24 VDC)
ON → OFF : Y000, Y001: 5 μs or less Y: after 200: less than 0.2 ms (100 mA / 24 VDC)
Circuit insulation : Photocoupler insulation
Output operation indication : LED on when driving photo coupler
Output circuit configuration
Built-in high speed counter function
1 phase 1 count input : [C235, C236] Up to 2 points: Up to 60 kHz High speed comparison When using SET / RESET: 30 kHz [C237 to C245] Up to 4 points: Up to 10 kHz High speed comparison When using SET / RESET: 10 kHz Processed by high- The sum of the frequencies to be summed (2-phase counter adds twice the input frequency), the maximum is 60 kHz. High Speed ??Comparison When using SET / RESET, 30 kHz is the maximum for the sum of the frequencies processed by the sequencer with the high-speed counter and pulse density instruction (2-phase counter adds twice the input frequency).
1 phase 2 count input : [C246] Maximum 1 point: Up to 60 kHz High speed comparison When using SET / RESET: 30 kHz [C247 to C250] Up to 2 points: Up to 10 kHz High speed comparison When using SET / RESET: 10 kHz Frequency processed by the sequencer with high- (2-phase counter adds twice the input frequency), the maximum is 60 kHz. High Speed ??Comparison When using SET / RESET, 30 kHz is the maximum for the sum of the frequencies processed by the sequencer with the high-speed counter and pulse density instruction (2-phase counter adds twice the input frequency).
2 phase 2 count input : [C251] Maximum 1 point: Up to 30 kHz High speed comparison When using SET / RESET: 15 kHz [C252 to C255] Up to 2 points: Up to 5 kHz High speed comparison When using SET / RESET: 5 kHz Frequency processed by the sequencer with high- (2-phase counter adds twice the input frequency), the maximum is 60 kHz. High Speed ??Comparison When using SET / RESET, 30 kHz is the maximum for the sum of the frequencies processed by the sequencer with the high-speed counter and pulse density instruction (2-phase counter adds twice the input frequency).
Built-in pulse output / positioning function :
Number of control axes : Independent 2 axes
Maximum frequency : 100 kHz
Programming language : Sequence program
Corresponding basic unit : Transistor output type basic unit
Pulse output instruction : . Pulse output (PLSY) . Pulse output with acceleration / deceleration (PLSR) Pulse output format: Pulse train (direction controlled by sequence)
Positioning command : . Reading ABS current value ([D] ABS) . Returning to the origin [ZRN] (No DOG search function) Decelerates with near point DOG: ON and stops at the near point DOG: OFF. (It differs from zero point return operation by counting the zero point signal) . Variable speed pulse output [PLSV] . Relative positioning [DRVI] . Absolute positioning [DRVA] Pulse output format: Pulse train + direction
Ambient temperature : 0 to 55 ° C. ... Operating, -20 to 70 ° C....when saved
Relative humidity : 35 to 85% RH (noncondensing)...at operation
Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2
Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 Ten times in each of X, Y, Z directions (80 minutes in total in total) The criterion is based on IEC 61131-2
Direct installation Frequency: 10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2
Frequency: 57 to 150 Hz : Acceleration: 9.8 m / s 2 X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2
Impact resistance : 147 m / s 2 , working time 11 ms, criterion for judgment three times in X, Y, Z directions by sine half-wave pulse is according to IEC 61131-2
Noise immunity : Noise voltage with 1,000 Vp-p, noise width 1 μs, rising 1 ns, with noise si
tor with period of 30 to 100 Hz
Withstand voltage : When performing the withstand voltage test, make the voltage between each terminal and the ground terminal of the basic unit as follows. Between the power supply terminal (AC power supply) and the earth terminal: AC 1.5 kV 1 minute DC 24 V service power supply and between the input terminal (24 VDC) and the earth terminal: 500 VAC for 1 min Between the output terminal (transistor)
Insulation resistance : When conducting the insulation resistance test, perform the following voltage between each terminal and the ground terminal of the basic unit. Between the power supply terminal (AC power supply) and the earth terminal: 500 VDC DC insulation resistance meter 5 MΩ or more DC 24 V service power supply, between the input terminal (24 VDC) and the earth terminal: 500 V DC 500 MΩ or more with the insulation resistance meter Output terminal Between: 500 MV DC Insulation resistance meter 5 MΩ or more
ground : Class D grounding (grounding resistance: 100 Ω or less)Grounding should be dedicated ground or common ground.
Use atmosphere : There is no corrosive property, flammable gas, conductive dust (dust) is not serious
Use altitude : It can not be used under an environment pressurized to 2,000 m or less under atmospheric pressure. It may break down.
Shipping Weight : 2 Kg
Estimated Lead Time : In stock. Usually ships in 7-10 working days.
Manufacturer : Mitsubishi Electric
FX1S-14MT-001
FX1S series FX1S-14MT-001
Arithmetic control method : Stored program iterative calculation method with interrupt instruction
Input / output control method : Batch processing method (when END instruction is executed), I / O refresh command, with pulse catch function
Programming language : Relay symbol method + step ladder method (SFC expressible)
Program memory Maximum memory capacity : 2000 step comment, up to 2000 steps including file register
Internal memory capacity / format : 2000 step EEPROM (memory backup not required)
Memory cassette (memory board) : FX1N-EEPROM-8L (8000 step EEPROM: FX1S can only use 2000 steps)
Write function during RUN : Yes (program changeable during sequencer RUN)
Protection function : With password protection function (by keyword function)
Real time clock Clock function : Built-in 1980 to 2079 (with leap year correction) 2-digit / 4-digit year AD changeable, monthly difference ± 45 seconds (25 ° C) ※ Note on clock function The current time of the built- It is backed up with. The large capacity condenser (built-in) is fully charged at the energization time of 30 minutes and holds the present value for 10 days.
Types of instructions Basic instruction : . Sequence instruction: 27 pieces . Step ladder command: 2 pieces
Application instruction : Application instruction: 85 species
Arithmetic processing speed Basic instruction : 0.55 to 0.7 μs / instructions
Application instruction : 3.7 to several 100 μs / instructions
Number of input / output points Number of input points : 16 points or less (according to input specifications) can not be added
Number of output points : 14 points or less (due to output specification) Can not be added
Total score : 30 points or less (according to input / output specification) can not be added
device I / O relay Input relay : X000 to X017 16 points (octal number) can not be expanded (FX1S - 14M□ corresponds to the range from X000 to X007)
Output relay : Y000 ~ Y015 14 points (octal number) can not be added (FX1S - 14M□ corresponds to Y000 ~ Y005 range)
Auxiliary relay For general use : M 0 to M 383 384 points
For keeping : M384 to M511 128 points ※ Note on keeping area Keep area and nonkeeping area are fixed. (Parameter can not be changed.) In order to reliably keep to EEPROM, it is necessary for the sequencer to be energized for at least 5 consecutive minutes.
Special purpose : M8000 to M8255 256 points
State Initial state : S0 to S9 10 points
For keeping : All points of power failure hold (S 0 to S 127) * Note on keep area Keep area and non-keep area are fixed. (Parameter can not be changed.) In order to reliably keep to EEPROM, it is necessary for the sequencer to be energized for at least 5 consecutive minutes.
Timer (on-delay) 100 ms : T 0 to T 62 63 points (0.1 to 3,276.7 seconds)
10 ms : When M8028 is turned ON, T32 to T62 (31 points) can be changed to 10ms timer (0.01 to 327.67 seconds)
1 ms : T63 1 point (0.001 to 32.767 seconds)
Other : Two internal analog volume can be used as analog timer VR 1: D 8030, VR 2: D 8031 ??2 points (0 to 255)
counter 16 bit up : C 0 to C 15 16 points (0 to 32,767 counts)
16 bit up (keep) : C16 to C31 16 points (0 to 32,767 counts) (EEPROM keeping) * Note on keeping area Keep area and nonkeeping area are fixed. (Parameter can not be changed.) In order to reliably keep to EEPROM, it is necessary for the sequencer to be energized for at least 5 consecutive minutes.
High speed counter : [32-bit high-speed up / down (EEPROM keep)] C235 to C255 1 phase: 60 kHz, 10 kHz 2 phases: 30 kHz, 5 kHz There are restrictions on the number of points and input frequencies that can be used depending on the conditions used. ※ Note on Keep Area Keep area and non-keep area are fixed. (Parameter can not be changed.) In order to reliably keep to EEPROM, it is necessary for the sequencer to be energized for at least 5 consecutive minutes.
Data register (32 bits in pair use) For 16-bit general purpose : D0 to D127 128 points
For 16 bit keeping : D 128 - D 255 128 points (EEPROM keep) * Note on keep area Keep area and non-keep area are fixed. (Parameter can not be changed.) In order to reliably keep to EEPROM, it is necessary for the sequencer to be energized for at least 5 consecutive minutes.
File register (keep) : D 1000 - D 2499 1500 points (File register can be set in 500 points units) (EEPROM keep)
16 bit special use : D 8000 to D 8255 256 points
For 16 bit index : V 0 to V 7, Z 0 to Z 7 16 points
Pointer JUMP, for CALL branch : P0 to P63 64 points (for CJ instruction, CALL instruction, P63 for END jump)
Input interrupt : I00□ ~ I50□ 6 points
nesting : [For master control] N 0 to N 7 8 points (for MC command)
constant Decimal number (K) : 16 bits: -32,768 to + 32,767 32 bits: -2, 147, 483, 648 to +2, 147, 483, 647
Hexadecimal (H) : 16 bits: 0 to FFFF 32 bits: 0 to FFFFFFFF
Rated voltage : AC 100 to 240 V
Voltage tolerance range : AC 85 - 264 V
Rated frequency : 50/60 Hz
Allowable momentary power outage time : Operation continues with an instantaneous blackout of 10 ms or less.
Power supply fuse : 250V 1A
Inrush current : Maximum 15 A 5 ms max. / AC 100 V, max 25 A up to 5 ms / AC 200 V
power consumption : Includes 19 W input current (7 mA per point, or 5 mA).
24 VDC service power supply : 400 mA
Input specification :
Number of input points : 8 points
Input connection shape : Terminal block (M3 screw)
Input format : sink
Input signal voltage : DC 24 V ± 10%
Input impedance X000 to X007 : 3.3 kΩ
X010 or later : -
Input signal current X000 to X007 : 7 mA / 24 VDC
X010 or later : -
Input ON sensitivity current X000 to X007 : 4.5 mA or more
X010 or later : -
Input OFF sensitivity current : 1.5 mA or less
Input response time : Approximately 10ms X000 to X017 (up to the basic unit built-in number) has a built-in digital filter and can be changed from 0 to 15 ms in 1 ms unit by D8020. When 0 is specified, X000, X001 is 10 μs, and X002 to X017 are 50 μs. (FX1S - 14M□ corresponds to the range from X000 to X007)
Input signal format : No-voltage contact input NPN open collector transistor
Input circuit insulation : Photocoupler insulation
Input operation display : LED ON when input is ON
Input circuit configuration
Number of output points : 6 points
Output connection shape : Terminal block (M3 screw)
Output type / format : Transistor / sink output
External power supply : DC 5 to 30 V
Maximum load Resistive load : 0.5 A or less / per output 0.8 A or less / per COM terminal
Inductive load : 12 W / DC 24 V
Minimum load : -
Open-circuit leakage current : 0.1 mA / DC 30 V
ON voltage : 1.5 V
Response time OFF → ON : Y000, Y001: 5 μs or less Y: after 200: less than 0.2 ms (100 mA / 24 VDC)
ON → OFF : Y000, Y001: 5 μs or less Y: after 200: less than 0.2 ms (100 mA / 24 VDC)
Circuit insulation : Photocoupler insulation
Output operation indication : LED on when driving photo coupler
Built-in high speed counter function
1 phase 1 count input : [C235, C236] Up to 2 points: Up to 60 kHz High speed comparison When using SET / RESET: 30 kHz [C237 to C245] Up to 4 points: Up to 10 kHz High speed comparison When using SET / RESET: 10 kHz Processed by high- The sum of the frequencies to be summed (2-phase counter adds twice the input frequency), the maximum is 60 kHz. High Speed ??Comparison When using SET / RESET, 30 kHz is the maximum for the sum of the frequencies processed by the sequencer with the high-speed counter and pulse density instruction (2-phase counter adds twice the input frequency).
1 phase 2 count input : [C246] Maximum 1 point: Up to 60 kHz High speed comparison When using SET / RESET: 30 kHz [C247 to C250] Up to 2 points: Up to 10 kHz High speed comparison When using SET / RESET: 10 kHz Frequency processed by the sequencer with high- (2-phase counter adds twice the input frequency), the maximum is 60 kHz. High Speed ??Comparison When using SET / RESET, 30 kHz is the maximum for the sum of the frequencies processed by the sequencer with the high-speed counter and pulse density instruction (2-phase counter adds twice the input frequency).
2 phase 2 count input : [C251] Maximum 1 point: Up to 30 kHz High speed comparison When using SET / RESET: 15 kHz [C252 to C255] Up to 2 points: Up to 5 kHz High speed comparison When using SET / RESET: 5 kHz Frequency processed by the sequencer with high- (2-phase counter adds twice the input frequency), the maximum is 60 kHz. High Speed ??Comparison When using SET / RESET, 30 kHz is the maximum for the sum of the frequencies processed by the sequencer with the high-speed counter and pulse density instruction (2-phase counter adds twice the input frequency).
Number of control axes : Independent 2 axes
Maximum frequency : 100 kHz
Programming language : Sequence program
Corresponding basic unit : Transistor output type basic unit
Pulse output instruction : . Pulse output (PLSY) . Pulse output with acceleration / deceleration (PLSR) Pulse output format: Pulse train (direction controlled by sequence)
Positioning command : . Reading ABS current value ([D] ABS) . Returning to the origin [ZRN] (No DOG search function) Decelerates with near point DOG: ON and stops at the near point DOG: OFF. (It differs from zero point return operation by counting the zero point signal) . Variable speed pulse output [PLSV] . Relative positioning [DRVI] . Absolute positioning [DRVA] Pulse output format: Pulse train + direction
Ambient temperature : 0 to 55 ° C. ... Operating, -20 to 70 ° C....when saved
Relative humidity : 35 to 85% RH (noncondensing)...at operation
Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2
Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 Ten times in each of X, Y, Z directions (80 minutes in total in total) The criterion is based on IEC 61131-2
Direct installation Frequency: 10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2
Frequency: 57 to 150 Hz : Acceleration: 9.8 m / s 2 X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2
Impact resistance : 147 m / s 2 , working time 11 ms, criterion for judgment three times in X, Y, Z directions by sine half-wave pulse is according to IEC 61131-2
Noise immunity : Noise voltage with 1,000 Vp-p, noise width 1 μs, rising 1 ns, with noise si
tor with period of 30 to 100 Hz
Withstand voltage : When performing the withstand voltage test, make the voltage between each terminal and the ground terminal of the basic unit as follows. Between the power supply terminal (AC power supply) and the earth terminal: AC 1.5 kV 1 minute DC 24 V service power supply and between the input terminal (24 VDC) and the earth terminal: 500 VAC for 1 min Between the output terminal (transistor)
Insulation resistance : When conducting the insulation resistance test, perform the following voltage between each terminal and the ground terminal of the basic unit. Between the power supply terminal (AC power supply) and the earth terminal: 500 VDC DC insulation resistance meter 5 MΩ or more DC 24 V service power supply, between the input terminal (24 VDC) and the earth terminal: 500 V DC 500 MΩ or more with the insulation resistance meter Output terminal Between: 500 MV DC Insulation resistance meter 5 MΩ or more
ground : Class D grounding (grounding resistance: 100 Ω or less)Grounding should be dedicated ground or common ground.
Use atmosphere : There is no corrosive property, flammable gas, conductive dust (dust) is not serious
Use altitude : It can not be used under an environment pressurized to 2,000 m or less under atmospheric pressure. It may break down.
Shipping Weight : 2 Kg
- Condition : Brand New
- Warranty : 1 Years
- Product Number :FX1S-14MR-ES/UL
- Manufacturer :Mitsubishi Electric
- Estimated Lead Time : In stock. Usually ships in 7-10 working days.
- Manufacturer : Mitsubishi Electric
- Product No. : FX1S-20MR-001
- Product type : Programmable logic controller
- Shipping weight : 1.5 Kg
- Condition : Brand New
- Warranty : 1 Years
- Product Number : FX1S-30MR-001
- Manufacturer : Mitsubishi Electric
-
Estimated Lead Time : 5 - 7 working days
Manufacturer : Mitsubishi Electric
Product No. : FX1S-30MT-001
-
Product type : FX1S Series Programmable Controllers
-
PLC type: FX1S
-
Total number of I / O channels : 30
-
Unit type : M = MPU - main unit
-
Output type : T = Transistor
-
Shipping weight : 1.5 Kg
Estimated Lead Time: 5 - 7 Working Days
? Shipping Weight (KG) : 3.0
? Max. number input/output: 128
? No. of inputs: 64
? No. of outputs: 64
? Type of output: Relay
? Power supply: 100-240V AC
? Power consumption: 100VA
- Condition : Brand New
- Warranty : 1 Years
- Product Number : FX2N-128MT-001
- Manufacturer : Mitsubishi Electric
Estimated Lead Time: 5-7 Working Days
Manufacturer: Mitsubishi Electric
FX2N-128MT-ES / UL
FX2N series FX2N-128MT
The arithmetic and control system : Stored program repeat operation method (dedicated LSI), there interrupt instruction
Input and output control method : Batch processing method (END when the instruction is executed), input and output refresh command, Pulse catch function
Programming language : Relay symbol system + step ladder system (SFC representation Allowed)
Program memory : The maximum memory capacity : 16000 step comment, 16000 steps, including the file register
Built-in memory capacity and format : 8000 step RAM (backed up by a built-in lithium battery)
Memory cassette (memory board) :
- Condition : Brand New
- Warranty : 1 Years
- Product Number : FX2N-16EX
- Manufacturer : Mitsubishi Electric
- Condition : Brand New
- Warranty : 1 Years
- Product Number : FX2N-16EX-ES/UL
- Manufacturer : Mitsubishi Electric
Estimated Lead Time : 7 - 10 working days.
Manufacturer : Mitsubishi Electric
Product No : FX2N-16EYR
Product type : Output Expansion Block
Application sequencer FX1N, FX3G, FX2N, FX3U, FX1NC, FX3GC, FX2NC, FX3UC
FX2NC - CNV - IF is required for connection to FX1NC and FX2NC. To connect to FX3GC, FX3UC, FX2NC - CNV - IF or FX3UC - 1PS - 5V is required. mass 0.3 kg
Power supply specification
Rated voltage Internal power supply from the sequencer
Output specification
Number of output points 16 points
Output connection shape Vertical terminal block (M3 screw)
Output type / format relay
External power supply AC 250 V DC 30 V or less
Maximum load Resistive load Total load current of 2A / 1 point common per resistance load should be as follows.
Estimated Lead Time : 5 - 7 working days.
Manufacturer : Mitsubishi Electric
FX2N Extensions Blocks
-
No. of inputs: 16
-
No. of outputs: 16
-
Type of output: Relay
-
Power supply: 100-240V AC
-
Shipping Weight (KG) : 1.5
- Estimated Lead Time : 5 - 7 working days.
- Manufacturer : Mitsubishi Electric
- Product No. : FX2N-16EYT-ESS/UL
- Product type : Extension Blocks FX2N
- Integrated inputs/outputs : 16
- Integrated outputs : 16
- Output type : Transistor (source)
- Response time : <0.2
- Dimensions (WxHxD), approx : 4cm x 9cm x 8.7cm
- Weight : 0.3 Kg
- Shipping weight : 1.5 Kg
Estimated Lead Time: 5-7 Working Days
Manufacturer: Mitsubishi Electric
-
FX2N-16MR-001
-
PLC type : FX2N
-
Total number of I / O channels : 16
-
Unit type : MPU - main unit
-
Output type : Relay
-
Shipping Weight : 1.3 Kg
- Condition : Brand New
- Warranty : 1 Years
- Product Number :FX2N-16MR-DS
- Manufacturer :Mitsubishi Electric
Estimated Lead Time: 5-7 Working Days
Manufacturer: Mitsubishi Electric
-
FX2N-16MT-001
-
PLC type : FX2N
-
Total number of I / O channels: 16
-
Unit type : MPU - main unit
-
Output type : Transistor
-
Shipping Weigth : 1.3 Kg
Estimated Lead Time: 5-7 Working Days
Manufacturer: Mitsubishi Electric
FX2N-16MT-ES/UL
The arithmetic and control system : Stored program repeat operation method (dedicated LSI), there interrupt instruction
Input and output control method : Batch processing method (END when the instruction is executed), input and output refresh command, Pulse catch function
Programming language : Relay symbol system + step ladder system (SFC representation Allowed)
Program memory : The maximum memory capacity : 16000 step comment, 16000 steps, including the file register
Built-in memory capacity and format : 8000 step RAM (backed up by a built-in lithium battery)
Memory cassette (memory board) :
Estimated Lead Time : In stock. Usually ships in 5-7 working days.
Manufacturer : Mitsubishi Electric
High speed counter block FX 2 N - 1 HC
Number of input channels : 1ch
Input format : Open collector, differential line driver (Differential line driver output type encoder is connected to 5 V terminal)
Input voltage : DC 5 V, DC 12 V, DC 24 V can be selected by connection terminal
Maximum response frequency 1 phase 1 input : 50 kHz or less
1 phase 2 input : 50 kHz or less
2 phase input : 50 kHz or less (1 multiplication), 25 kHz or less (2 multiplication), 12.5 kHz or less (4 multiplication)
Count range : When 32 bits are specified: -2, 147, 483, 648 to +2, 147, 483, 647 When 16 bits are specified: 0 to 65,535 (upper limit value can be specified)
Count mode : Automatic up / down (However, in case of single phase 1 input, it depends on sequencer command or input terminal command)
Matching output (comparison) : When the current value of the counter and the comparison setting value (transfer data from the sequencer) match, the comparison output is set and it is turned OFF by a reset command from the sequencer. YH: Comparison is done by hardware and output immediately. YS: The comparison is performed by software in FX 2 N - 1 HC and output within 300 ?s. (Variation of 15 pulses occurs at 50 kHz)
Output format : Open collector output 2 points 5 VDC to 24 V 0.5 A
Display (LED) : φ A, φ B, DIS, PRE, YH, YS, POWER, UP, DOWN
Number of occupied I / O points : 8 points (either input or output may be considered)
Application sequencer : FX2N, FX3U, FX2NC, FX3UC
FX2NC - CNV - IF is required for connection to FX2NC. To connect to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required. -
Mass : 0.3 kg
Power supply specification :
Power supply : DC 5 V 90 mA (Internal power supply from PLC)
Ambient temperature Relative humidity Impact resistance Noise immunity Withstand voltage Insulation resistance Use atmosphere Use altitude
-
0 to 55 ° C.
-
Estimated Lead Time : 3 - 5 working days.
-
Manufacturer : Mitsubishi Electric
Product No. : FX2N-1PG
Product type : Pulse Generator Unit
-
Number of I/O points occupied : 8 input or output points of PC for each PGU
-
Number of control axes : 1 (A single PC can control independent 8 axes maximum.)
-
Command speed : Operations are enabled at pulse speed of 10 Hz to 100 kHz, Command unit can be selected among Hz. cm/min, 10 deg/min and inch/min.
-
Pulse output format : Forward (FP) and reverse (RP) pulse or pulse (PLS) with direction (DIR) can be selected. Open collector and transistor output. 5 to 24V DC, 20 mA or less
-
Dimensions (HxWxD), approx : 9 cm X 8.7 cm X 4.3 cm
-
Shipping Weight : 1.5 Kg
Estimated Lead Time : In stock. Usually ships in 5-7 working days.
Manufacturer : Mitsubishi Electric
Impact resistance
Transmission standard : RS-232C compliant
Insulation method : Photocoupler insulation
Transmission distance : Maximum 15 m
External device connection method : D-SUB 9 pin connector (male)
Communication method : Full duplex bidirection
Communication procedure : Non-procedural communication
communication speed : [No procedure] 300/600/1200/2400/4800/9600/19200 (bps)
Display (LED) : RD, SD, POWER
Number of occupied I / O points : 8 points (It can count either input or output)
Application sequencer : FX 2 NC, FX 3 U, FX 2 NC, FX 3 UC FX 2 NC - CNV - IF is connected to FX 2 NC. To connect to FX 3 UC, FX 2 NC - CNV - IF or FX 3 UC - 1 PS - 5 V is required.
mass : 0.3 kg
Power supply specification :
Power supply : DC 5 V 40 mA (internal power supply from PLC) DC 24 V ± 10% 80 mA (external power supply)
Ambient temperature : 0 to 55 ° C.
-
Condition : Brand New
-
Warranty : 1 Years
-
Product Number : FX2N-2AD
-
Manufacturer :Mitsubishi Electric
-
Condition : Brand New
-
Warranty : 1 Years
-
Product Number : FX2N-2DA
-
Manufacturer :Mitsubishi Electric
Estimated Lead Time : In stock. Usually ships in 7-10 working days
Manufacturer : Mitsubishi Electric
Temperature adjustment block FX2N-2LC
Temperature sensor, temperature controlNumber of input points2 points
Type of inputthermocoupleK, J, R, S, E, T, B, N, PLII, WRe 5-26, U, L JIS C 1602-1995
Resistance temperature detector3-wire type Pt100 JIS C 1604-1997 (new JIS) JPt 100 JIS C 1604-1981 (old JIS)
Measurement accuracyAmbient temperature 23 ° C ± 5 ° C: Input range ± 0.3% ± 1 digit Ambient temperature 0 ° C to 55 ° C: Input range ± 0.7% ± 1 digit However, B input 0 to 399 ° C (0 to 799 ° F) and PLII , 0 to 32 ° F of WRe5-26 input is out of guaranteed accuracy range
Cold junction temperature compensation errorWithin ± 1.0 ° C. However, the input value is within ± 2.0 ° C at -150 to -100 ° C, and ± 3.0 ° C at -200 to -150 ° C.
resolution0.1 ° C (0.1 ° F) or 1 ° C (1 ° F) Depends on the input range of the sensor used.
Sampling period500 ms
Influence of external resistanceAbout 0.35 μV / Ω
Input impedance1 MΩ or more
Sensor currentAbout 0.3 mA
Permissible input wire resistance10 Ω or less
Operation at input break / short circuitUpscale / downscale
Current detector (CT) input (number of inputs)2 points
Current detector (CT) input (current detector)CTL-12-S36-8 or CTL-6-PH (made by usd)
Current detector (CT) input (heater current measurement value)When using CTL-12: 0.0 to 100.0 A When using CTL-6: 0.0 to 30.0 A
Current detector (CT) input (measurement accuracy)± 5% of the input value or 2A, whichever is larger (excluding the accuracy of the current detector)
Current detector (CT) input (sample period)1 second
control methodTwo position control, PID control (with auto tuning function), PI control
Control operation cycle500 ms
Measurement temperature rangeK-200.0 to 200.0 ° C, -100.0 to 400.0 ° C, -100 to 1300 ° C, -100 to 800 ° F, -100 to 2400 ° F
J-200.0 to 200.0 ° C, -100.0 to 400.0 ° C, -100.0 to 800.0 ° C, -100 to 1200 ° C, -100 to 1600 ° F, -100 to 2100 ° F
T-200.0 to 200.0 ° C, -200.0 to 400.0 ° C, 0.0 to 400.0 ° C, -300.0 to 400.0 ° F, -300.0 to 700.0 ° F, 0.0 to 700.0 ° F
S0 to 1700 ° C, 0 to 3200 ° F
R0 to 1700 ° C, 0 to 3200 ° F
E-200.0 to 200.0 ° C, 0 to 1000 ° C, 0 to 1800 ° F
B0 to 1800 ° C, 0 to 3000 ° F
N0 to 1300 ° C, 0 to 2300 ° F
PLII0 to 1200 ° C, 0 to 2300 ° F
Wre5-260 to 2300 ° C, 0 to 3000 ° F
U-200.0 to 600.0 ° C, -300.0 to 700.0 ° F
L0.0 to 900.0 ° C, 0 to 1600 ° F
JPt100-50.0 to 150.0 ° C, -200.0 to 500.0 ° C, -300.0 to 300.0 ° F, -300 to 900 ° F
Pt100-50.0 to 150.0 ° C, -200.0 to 600.0 ° C, -300.0 to 300.0 ° F, -300 to 1100 ° F
Heater burnout detectionAlarm is detected by setting buffer memory (variable in the range of 0.0 to 100.0 A)
Operation mode0: Measured value monitor 1: Measured value monitor + temperature alarm 2: Measured value monitor + temperature alarm + control (selected by buffer memory)
Self-diagnosis functionBy adjustment data check, input value check, watchdog timer. Transistor output OFF when abnormality detected
memoryBuilt-in EEPROM (number of rewrites: 100,000 times)
Insulation method
Estimated Lead Time : 5 - 7 working days.
Manufacturer : Mitsubishi Electric
FX2N-32CCL
CC-Link system interface block (remote device station)
CC-Link version : Ver.1.00
Station type : Remote device station
Insulation method : The network bus and the internal power supply are photocoupler isolated
Transmission speed : 156 kbps / 625 kbps / 2.5 Mbps / 5 Mbps / 10 Mbps selectable (set with rotary switch)
Station number : 1 to 64 stations (set with rotary switch)
Number of occupied stations : 1 to 4 stations (set with rotary switch)
Maximum cable total extension (maximum transmission distance) : Different according to transmission speed up to 1200 m
Number of remote I / O points : The number of remote I / O points per station is 32 input points and 32 output points. However, the upper 16 points of the last station are occupied by the CC-Link system as the system area.
Remote register point number : The number of remote registers per station is 4 RW write areas, 4 RW read areas.
Number of links per station : Remote input / output 32 points / 32 points (RX / RY) However, the upper 16 points of the last station are occupied by the CC-Link system as a system area. Remote register (RWw) 4 points (Master station ? Remote device station) Remote register (RWr) 4 points (Remote device station ? Master station)
Communication method : Polling method
Synchronization method : Frame synchronization method
Coding scheme : NRZI system
Transmission path format : Bus (RS-485)
Transmission format : HDLC compliant
Error control method : CRC (X 16 + X 12 + X 5 + 1)
Connection cable : CC-Link dedicated cable, CC-Link exclusive high-performance cable CC-Link exclusive cable and CC-Link exclusive high-performance cable can not be mixed.
Communicate with the sequencer : Performing via buffer memory with FROM / TO instruction
Display (LED) : RD, SD, L RUN, L ERR, POWER
Number of occupied I / O points : 8 points (It can count either input or output)
Application sequencer : FX1N, FX3G, FX2N, FX3U, FX1NC, FX3GC, FX2NC, FX3UC
FX2NC - CNV - IF is required for connection to FX1NC and FX2NC. To connect to FX3GC, FX3UC, FX2NC - CNV - IF or FX3UC - 1PS - 5V is required. mass : 0.2 Kg
Power supply : DC 5 V internal power supply: Power is supplied from the sequencer via extension cable. DC 24 V external power supply (24 VDC
Estimated Lead Time : In stock. Usually ships in 7-10 working days.
-
Manufacturer : Mitsubishi
Product No. :
Estimated Lead Time : 7-10 working days.
Manufacturer : Mitsubishi Electric
Product No. : FX2N-32MR-001
Product type : Fx2n Series Programmable Controllers
Max. number input/output: 32
No. of inputs: 16
No. of outputs: 16
Type of output: Relay
Power supply: 100-240V AC
Power consumption: 40va
Shipping weight : 2 Kg
- Condition : Brand New
- Warranty : 1 Years
- Product Number :FX2N-32MR-DS
- Manufacturer :Mitsubishi Electric
Condition : Brand New
Warranty : 1 Year
Part Number : FX2N-32MR-ES/UL
Manufacturer : Mitsubishi Electric
Estimated Lead Time: 5-7 Working Days
Manufacturer: Mitsubishi Electric
-
FX2N-32MT-001
-
PLC type : FX2N
-
Total number of I / O channels :32
-
Unit Type : MPU - main unit
-
Output type : Transistor
-
Shipping Weight : 1.65 Kg
Estimated Lead Time: 5-7 Working Days
Manufacturer: Mitsubishi Electric
FX2N-32MT-ES/UL
The arithmetic and control system : Stored program repeat operation method (dedicated LSI), there interrupt instruction
Input and output control method : Batch processing method (END when the instruction is executed), input and output refresh command, Pulse catch function
Programming language : Relay symbol system + step ladder system (SFC representation Allowed)
Program memory : The maximum memory capacity : 16000 step comment, 16000 steps, including the file register
Built-in memory capacity and format : 8000 step RAM (backed up by a built-in lithium battery)
Memory cassette (memory board) :
Estimated Lead Time : 7 - 10 working days.
Manufacturer : Mitsubishi Electric
FX2N-48ER
I / O expansion unit FX2N-48ER
Application sequencer : FX1N, FX3G, FX2N, FX3U
mass : 0.85 Kg
Rated voltage : AC 100 V to 240 V
Voltage tolerance range : AC 85V ~ 264V
Rated frequency : 50/60 Hz
Power supply fuse : 250 V 5 A
Inrush current : AC 100 V: maximum 40 A 5 ms or less AC 200 V: maximum 60 A 5 ms or less
power consumption : 35W
24 VDC service power supply : 24 VDC 460 mA or less When connecting input / output extension block, 24 VDC service power is consumed.
Input specification :
Number of input points : 24 points
Input connection shape : Removable terminal block (M3 screw)
Input format : sink
Input signal voltage : DC 24 V
- Estimated Lead Time : 5 - 7 working days.
- Manufacturer : Mitsubishi Electric
- Product No. : FX2N-48ER-DS
- Product type : FX2N Extension Units
- Integrated inputs/outputs : 48
- Max. input apparent power : 30 W
- Weight : 0.85 Kg
- Shipping weight : 2 Kg
Estimated Lead Time : In stock. Usually ships in 7-10 working days.
Manufacturer : Mitsubishi Electric
FX2N-48ER-ES/UL
I / O expansion unit FX2N - 48ER - ES / UL
Application sequencer : FX1N, FX3G, FX2N, FX3U
mass : 0.85 kg
Rated voltage : AC 100 V to 240 V
Voltage tolerance range : AC 85V ~ 264V
Rated frequency : 50/60 Hz
Power supply fuse : 250 V 5 A
Inrush current : AC 100 V: maximum 40 A 5 ms or less tengah AC 200 V: maximum 60 A 5 ms or less
power consumption : 35W
24 VDC service power supply : 24 VDC 460 mA or less When tengah connecting input / output extension block, 24 VDC service power is consumed.
Number of input points : 24 points
Input connection shape : Removable terminal block (M3 screw)
Input format : Sink / source
Input signal voltage : DC 24 V
Estimated Lead Time : 7 - 10 working days.
Manufacturer : Mitsubishi Electric
Product No. : FX2N-48MR-001
Product type : Fx2n Series Programmable Controllers
Max. number input/output: 48
No. of inputs: 24
No. of outputs: 24
Type of output: Relay
Power supply: 100-240V AC
Power consumption: 50VA
Shipping weight : 3 Kg
- Estimated Lead Time : 7-10 working days.
- Manufacturer : Mitsubishi Electric
- Product No. : FX2N-48MR-DS
- Product type : FX2N Series Base Units
- Integrated inputs/outputs : 48
- Power supply : 24V DC
- Integrated inputs : 24
- Integrated outputs : 24
- Output type : Relay
- Power consumption : 30W
- Weight : 0.85 kg
- Dimensions , approx : 18.2cm x 9cm x 8.7cm
- Shipping weight : 1.5Kg
- Condition : Brand New
- Warranty : 1 Years
- Product Number : FX2N-48MT-001
- Manufacturer : Schneider Electric
Estimated Lead Time: 5-7 Working Days
Manufacturer: Mitsubishi Electric
FX2N-48MT-ES / UL
The arithmetic and control system : Stored program repeat operation method (dedicated LSI), there interrupt instruction
Input and output control method : Batch processing method (END when the instruction is executed), input and output refresh command, Pulse catch function
Programming language : Relay symbol system + step ladder system (SFC representation Allowed)
Program memory : The maximum memory capacity : 16000 step comment, 16000 steps, including the file register
Built-in memory capacity and format : 8000 step RAM (backed up by a built-in lithium battery)
Memory cassette (memory board) :
Condition : Brand New
Warranty : 1 Years
Product Number :FX2N-4AD
Manufacturer :Mitsubishi Electric
Estimated Lead Time : 7 - 10 working days.
-
Manufacturer : Mitsubishi Electric
Product No. : FX2N-4AD-PT
Product type : Input Block I/O Module
-
Description : Programmable Controllers, Input Block I/O Module
-
Channel : 4 CH Input
-
Input types : 3-wire platinum resistance thermometer sensor(s) Pt100
-
Compensated range : -100 to +600
Estimated Lead Time : 7 - 10 working days.
Manufacturer : Mitsubishi Electric
Product No. : FX2N-4AD-TC
Product type : Analog Input Module
K and J type thermocouple input block (4ch)
Total number of occupied I/O : 8
5V DC requirements : 40mA
Shipping weight : 5 Kg
- Condition : Brand New
- Warranty : 1 Years
- Product Number : FX2N-4DA
- Manufacturer : Mitsubishi Electric