- Estimated Lead Time : 8 - 10 weeks.
- Manufacturer : Yokogawa
- Product No. : EJA110E-JHS4G-912EB/KS21/X2/A
- Product type : Differential Pressure Transmitter
- Model : EJA110E = Differential pressure transmitter
- Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
- Measurement span (capsule) : H = 5 to 500 kPa (20 to 2000 inH2O)
- Wetted parts material *2 : S = Cover flange and process connector ASTM CF-8M *1 , Capsule Hastelloy C-276 *2(Diaphragm) F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
- Process connections : 4 = with 1/2 NPT female process connector
- Bolts and nuts material : G = 316L SST
- Installation : 9 = Horizontal piping and left side high pressure
- Amplifier housing : 1 = Cast aluminum alloy
- Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
- Integral indicator : E = Digital indicator with the range setting switch (push button)*9
- Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
- ATEX : KS21 = ATEX Intrinsically safe Approval *1 *3 Applicable Standard: EN 60079-0:2012/A11:2013, EN 60079-11:2012, EN 60079-26:2007 Certificate: DEKRA 11ATEX0228 X II 1G, 2D Ex ia IIC T4 Ga, Ex ia IIIC T85?C T100?C T120?C Db Degree of protection: IP66/IP67 Amb. Temp. (Tamb) for EPL Ga: ?50 to 60?C (?58 to 140?F) Maximum Process Temp. (Tp) for EPL Ga:120?C Electrical data: Ui=30 V, Ii=200 mA, Pi=0.9 W, Ci=27.6 nF, Li=0
- Estimated Lead Time : 8 - 10 weeks.
- Manufacturer : Yokogawa
- Product No. : EJA110E-JHS4G-912EJ
- Product type : EJA110E Differential Pressure Transmitter
- Model : EJA110E = Differential pressure transmitter
- Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
- Measurement span (capsule) : H = 5 to 500 kPa (20 to 2000 inH2O)
- Wetted parts material *2 : S = Cover flange and process connector ASTM CF-8M *1 , Capsule Hastelloy C-276 *2(Diaphragm) F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
- Process connections : 4 = with 1/2 NPT female process connector
- Bolts and nuts material : G = 316L SST
- Installation : 9 = Horizontal piping and left side high pressure
- Amplifier housing : 1 = Cast aluminum alloy
- Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
- Integral indicator : E = Digital indicator with the range setting switch (push button)*9
- Mounting bracket : J = 316 SST 2-inch pipe mounting, flat type (for horizontal piping)
- Weight : 2.8 Kg
- Shipping weight : 5 Kg
- Estimated Lead Time : 4 - 6 weeks.
- Manufacturer : Yokogawa
- Product No. : EJA110E-JHS4G-919DD-KU22
- Product type : Differential Pressure Transmitter
- Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
- Measurement span (capsule) : H = 5 to 500 kPa (20 to 2000 inH2O)
- Wetted parts material *2 : S = Cover flange and process connector ASTM CF-8M *1, Capsule Hastelloy C-276 *2(Diaphragm)F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
- Process connections : 4 = With 1/2 NPT female process connector
- Bolts and nuts material : G = 316L SST
- Installation : 9 = Horizontal piping and left side high pressure
- Amplifier housing : 1 = Cast aluminum alloy
- Electrical connection : 9 = M20 female, two electrical connections and a blind plug*7
- Integral indicator : D = Digital indicator*8
- Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
- Shipping weight : 4Kg
-
Condition : Brand New
-
Warranty : 1 Year
-
Part Number : EJA110E-JHS4G-919EB/KF22/D4/C2
-
Manufacturer : Yokogawa
- Condition : Brand New
- Warranty : 1 Years
- Product Number :EJA430E-JAS4J-832EJ/NS11/D3
- Manufacturer :Yokogawa
-
Condition : Brand New
-
Warranty : 1 Year
-
Part Number : EJA110E-JHS5J-914EB
-
Manufacturer : Yokogawa
-
Estimated Lead Time : 8 - 10 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JLH4G-712DD/KU22
-
Product type : EJA110E Differential pressure transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : L = 0.5 to 10 kPa (2.0 to 40 inH2O) (For Wetted parts material code M, H, T, A, D, B and W)
-
Wetted parts material : H = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 Capsule, PTFE Teflon Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : G = 316L SST
-
Installation : 7 = Vertical piping, left side high pressure, and process connection downside
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
-
Integral indicator : D = Digital indicator with the range setting switch (push button)
-
Mounting bracket : D =Digital indicator
-
ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic *1 *3 [ATEX Intrinsically safe Ex ic] Applicable Standard: EN 60079-0:2012, EN 60079-11:2012 II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?30 to 60?C (?22 to 140?F) *2 Ui=30 V, Ci=27.6 nF, Li=0
-
Estimated Lead Time : 4 - 8 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JLH4G-722ED/KU22/A/D4
-
Product type : EJA110E Differential pressure transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : L = 0.5 to 10 kPa (2.0 to 40 inH2O) (For Wetted parts material code M, H, T, A, D, B and W)
-
Wetted parts material : H = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 Capsule, PTFE Teflon Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : G = 316L SST
-
Installation : 7 = Vertical piping, left side high pressure, and process connection downside
-
Amplifier housing : 2 = ASTM CF-8M stainless steel
-
Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
-
Integral indicator : E = Digital indicator with the range setting switch (push button)
-
Mounting bracket : D =304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
-
ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic *1 *3 [ATEX Intrinsically safe Ex ic] Applicable Standard: EN 60079-0:2012, EN 60079-11:2012 II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?30 to 60?C (?22 to 140?F) *2 Ui=30 V, Ci=27.6 nF, Li=0
Estimated Lead Time : 2 - 4 weeks.
Manufacturer : Yokogawa
Product No. : EJA110E-JLH4G-912DJ
Product type : Differential Pressure Transmitter
EJA110E : Differential pressure transmitter
J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
L - Measurement span (capsule) : 0.5 to 10 kPa (2.0 to 40 inH2O)(For Wetted parts material code M, H, T, A, D, B and W)
H - Wetted parts material
Cover flange and process connector : ASTM CF-8M
Capsule : Hastelloy C-276
Capsule gasket : PTFE Teflon
Vent/Drain plug : 316 SST
4 - Process connections : with 1/2 NPT female process connector
G - Bolts and nuts material : 316L SST
9 - Installation : Horizontal piping and left side high pressure
1 - Amplifier housing : cast aluminum alloy
2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs
D - Integral indicator : Digital Indicator
J - Mounting bracket : 316 SST 2-inch pipe mounting, flat type (for horizontal piping)
Weight : 2.8 Kg
Shipping weight : 4 Kg
-
Estimated Lead Time : 2 - 4 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JLH4G-917NB/K
-
Product type : EJA110E Differential pressure transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : L = 0.5 to 10 kPa (2.0 to 40 inH2O) (For Wetted parts material code M, H, T, A, D, B and W)
-
Wetted parts material : H = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 Capsule, PTFE Teflon Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : G = 316L SST
-
Installation : 9 = Horizontal piping and left side high pressure
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug
-
Integral indicator : N = None
-
Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
-
Shipping Weight : 4.5 Kg
- Estimated Lead Time : 8 - 10 weeks.
- Manufacturer : Yokogawa
- Product No. : EJA110E-JLS4G-322DD/KS21
- Product type : Differential Pressure Transmitter
- Output signal: J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)?
- Measurement span (capsule) : L = 0.5 to 10 kPa (2.0 to 40 inH2O) (For Wetted parts material code M, H, T, A, D, B and W)
- Wetted parts material? : S = Cover flange and process connector : ASTM CF-8M? , Capsule: Hastelloy C-2764 (Diaphragm); F316L SST, 316L SST (Others) , Capsule gasket: Teflon-coated 316L SST , Vent/Drain plug: 316 SST
- Process connections : 4 = with 1/2 NPT female process connector
- Bolts and nuts material : G = 316L SST
- Installation: -3
- Amplifier housing : 2 = ASTM CF-8M stainless steel6
- Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs plug5
- Integral indicator : D = Digital indicator5
- Mounting bracket : D = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
- Shipping Weight : 6Kg
-
Estimated Lead Time : 4 - 6 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JLS4J-912EB/KU22/D3/M11
-
Product type : EJA110E Differential pressure transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : L = 0.5 to 10 kPa (2.0 to 40 inH2O) (For Wetted parts material code M, H, T, A, D, B and W)
-
Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : J = B7 carbon steel
-
Installation : 9 = Horizontal piping and left side high pressure
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
-
Integral indicator : E = Digital indicator with the range setting switch (push button)
-
Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
-
ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic
-
Calibration units. : D3 = bar calibration (bar unit)
-
Material certificate. : M11 = Cover flange, Process connector
-
Shipping Weight : 4.5 Kg
-
Estimated Lead Time : 2 - 4 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JMB5G-72DDK/KS21/D3/M01/T12
-
Product type : EJA110E Differential Pressure Transmitter
-
EJA110E : Differential pressure transmitter
-
J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
M - Measurement span (capsule) : 1 to 100 kPa (4 to 400 inH2O)
-
B - Wetted parts material
-
Cover flange and process connector : Monel equivalent
-
Capsule : Monel
-
Capsule gasket : PTFE Teflon
-
Vent/Drain plug : Monel
-
5 - Process connections See the table in the next page for the codes for a diaphragm seal system : Without process connector (1/4 NPTfemale on the cover flanges)
-
G - Bolts and nuts material : 316L SST
-
7 - Installation : Vertical piping, left side high pressure, and process connection downside
-
2 - Amplifier housing : ASTM CF-8M stainless steel
-
D - Electrical connection : M20 female, two electrical connections and a SUS316 blind plug
-
D - Integral indicator : Digital indicator
-
K - Mounting bracket : 316 SST or SCS14A 2-inch pipe mounting, L type (for vertical piping)
-
KS21 : ATEX Intrinsically safe Approval = Applicable Standard: EN 60079-0:2012+A11:2013, EN 60079-11:2012 Certificate: DEKRA 11ATEX0228 X II 1G, 2D Ex ia IIC T4 Ga, Ex ia IIIC T85?C T100?C T120?C Db Degree of protection: IP66/IP67 Amb. Temp. (Tamb) for EPL Ga: ?50 to 60?C (?58 to 140?F) Maximum Process Temp. (Tp) for EPL Ga:120?C Electrical data: Ui=30 V, Ii=200 mA, Pi=0.9 W, Ci=27.6 nF, Li=0
- Condition : Brand New
- Warranty : 1 Years
- Product Number : EJA110E-JMB5G-72DDK/KS21/M01/D3
- Manufacturer : Yokogawa
- Estimated Lead Time : 8 - 10 weeks.
- Manufacturer : Yokogawa
- Product No. : EJA110E-JMH4G-322DD/KS21
- Product type : Differential Pressure Transmitter
- Output signal : J = 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)
- Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
- Wetted parts material : H = Cover flange and process connector ASTM CF-8M *1,Capsule Hastelloy C-276 *2, Capsule gasket PTFE Teflon,Vent/Drain plug 316 SST
- Process connections : 4 = with 1/2 NPT female process connector
- Bolts and nuts material : G = 316L SST
- Amplifier housing : 3 = Cast aluminum alloy with corrosion resistance properties*5
- Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
- Integral indicator : D = Digital indicator*8
- Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
- Shipping Weight : 6Kg
-
Estimated Lead Time : 4 - 6 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JMH4G-929DB/FF1/D3
-
Product type : EJA110E Differential pressure transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
-
Wetted parts material : H = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 Capsule, PTFE Teflon Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : G = 316L SST
-
Installation : 9 = Horizontal piping and left side high pressure
-
Amplifier housing : 2 = ASTM CF-8M stainless steel
-
Electrical connection : 9 = M20 female, two electrical connections and a blind plug
-
Integral indicator : D = Digital indicator
-
Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
-
Factory Mutual (FM) : FF1 = FM Explosionproof Approval
-
Calibration units. : D3 = bar calibration (bar unit)
-
Shipping Weight : 6 Kg
- Estimated Lead Time : 4 - 6 weeks.
- Manufacturer : Yokogawa
- Product No. : EJA110E-JMH5J-912DA/NF2
- Product type : Differential Pressure Transmitter
- Output signal : J = 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)
- Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
- Wetted parts material : H = Cover flange and process connector ASTM CF-8M *1,Capsule Hastelloy C-276 *2, Capsule gasket PTFE Teflon,Vent/Drain plug 316 SST
- Process connections : 5 = without process connector (1/4 NPT female on the cover flanges)
- Bolts and nuts material : J = B7 carbon steel
- Installation : 9 = Horizontal piping and left side high pressure
- Amplifier housing : 1 = Cast aluminum alloy
- Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
- Integral indicator : D = Digital indicator*8
- Mounting bracket : A
- NF2
- Shipping Weight : 8 Kg
- Condition : Brand New
- Warranty : 1 Years
- Product Number : EJA110E-JMM4G-924DN/KS21/D3
- Manufacturer : Yokogawa
-
Estimated Lead Time : 6 - 8 weeks.
Manufacturer : Yokogawa
-
Product No. : EJA110E-JMS4G-712DC
-
Product type : EJA110E Differential Pressure Transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
-
Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : G = 316L SST
-
Installation : 7 = Vertical piping, left side high pressure, and process connection downside
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
-
Integral indicator : D = Digital indicator
-
Mounting bracket : C
-
Weight : 2.8 Kg
-
Shipping Weight : 4 Kg
-
Estimated Lead Time : 4 - 6 weeks.
Manufacturer : Yokogawa
-
Product No. : EJA110E-JMS4G-712DD/D4
-
Product type : EJA110E Differential Pressure Transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
-
Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : G = 316L SST
-
Installation : 7 = Vertical piping, left side high pressure, and process connection downside
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
-
Integral indicator : D = Digital indicator
-
Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
-
Calibration units : D4 = M calibration (kgf/cm2 unit)
-
Weight : 2.8 Kg
-
Shipping Weight : 4 Kg
-
Estimated Lead Time : 8 - 10 weeks.
Manufacturer : Yokogawa
-
Product No. : EJA110E-JMS4G-712DD/KF22/D4
-
Product type : EJA110E Differential Pressure Transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
-
Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : G = 316L SST
-
Installation : 7 = Vertical piping, left side high pressure, and process connection downside
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
-
Integral indicator : D = Digital indicator
-
Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
ATEX : KF22 = ATEX Flameproof Approval *1 Applicable Standard: EN 60079-0:2012/A11:2013, EN 60079-1:2007, EN 60079-31:2009 Certificate: KEMA 07ATEX0109 X II 2G, 2D Ex d IIC T6...T4 Gb, Ex tb IIIC T85?C Db Degree of protection: IP66/IP67 Amb. Temp. (Tamb) for gas-proof : T4; ?50 to 75?C (?58 to 167?F), T5; ?50 to 80?C (?58 to 176?F), T6; ?50 to 75?C (?58 to 167?F) Process Temp. for gas-proof (Tp): T4; ?50 to 120?C (?58 to 248?F), T5; ?50 to 100?C (?58 to 212?F), T6; ?50 to 85?C (?58 to 185?F) Max. surface Temp. for dust-proof: T85?C (Tamb: ?30 to 75?C, Tp: ?30 to 85?C)
-
Calibration units : D4 = M calibration (kgf/cm2 unit)
-
Weight : 2.8 Kg
-
Shipping Weight : 4 Kg
-
Estimated Lead Time : 3 - 4 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JMS4G-712DD/NF11/D4
-
Product Type : Differential Pressure Transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
-
Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : G = 316L SST
-
Installation : 7 = Vertical piping, left side high pressure, and process connection downside
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
-
Integral indicator : D = Digital indicator)
-
Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
-
NF11
-
Calibration units : D4 = M calibration (kgf/cm2 unit)
-
Weight : 2.8 Kg
-
Shipping Weight : 4 Kg
-
Estimated Lead Time : 3 - 4 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JMS4G-712EK/NS11/D4/X2
-
Product Type : Differential Pressure Transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
-
Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : G = 316L SST
-
Installation : 7 = Vertical piping, left side high pressure, and process connection downside
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
-
Integral indicator : E = Digital indicator with the range setting switch (push button)
-
Mounting bracket : K = 3316 SST or SCS14A 2-inch pipe mounting, L type (for vertical piping)
-
NS11
-
Calibration units : D4 = M calibration (kgf/cm2 unit)
-
Painting ( Coating change) : X2 = Anti-corrosion coating
-
Weight : 2.8 Kg
-
Shipping Weight : 4 Kg
-
Estimated Lead Time : 8 - 10 weeks.
-
Product replacement for EJA110A-EMS4B-67DD/T12
Manufacturer : Yokogawa
-
Product No. : EJA110E-JMS4G-717DD/T12
-
Product type : EJA110E Differential pressure transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
-
Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : G = 316L SST
-
Installation : 7 = Vertical piping, left side high pressure, and process connection downside
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug
-
Integral indicator : D = Digital indicator
-
Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
-
Pressure test/ Leak test certificate : T12 = Test Pressure: 16 MPa(2300 psi), Nitrogen(N2), Gas Retention time: one minute.
-
Weight : 2.8 Kg
-
Shipping Weight : 4 Kg
-
Estimated Lead Time : 2 - 4 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JMS4G-717ND/D4
-
Product type : EJA110E Differential pressure transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
-
Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : G = 316L SST
-
Installation : 7 = Vertical piping, left side high pressure, and process connection downside
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug
-
Integral indicator : N = None
-
Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
-
Calibration units. : D4 = M calibration (kgf/cm2 unit)
-
Shipping Weight : 4.5 Kg
-
Estimated Lead Time : 4 - 6 weeks.
Manufacturer : Yokogawa
-
Product No. : EJA110E-JMS4G-71CDD/D4
-
Product type : EJA110E Differential Pressure Transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
-
Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : G = 316L SST
-
Installation : 7 = Vertical piping, left side high pressure, and process connection downside
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : C = 1/2 NPT female, two electrical connections and a SUS316 blind plug
-
Integral indicator : D = Digital indicator
-
Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
-
Calibration units : D4 = M calibration (kgf/cm2 unit)
-
Weight : 2.8 Kg
-
Shipping Weight : 4 Kg
-
Estimated Lead Time : 2 - 4 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JMS4G-817EB/D4
-
Product type : EJA110E Differential pressure transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
-
Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : G = 316L SST
-
Installation : 8 = Horizontal piping and right side high pressure
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug
-
Integral indicator : E = Digital indicator with the range setting switch (push button)
-
Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
-
Calibration units. : D4 = M calibration (kgf/cm2 unit)
-
Shipping Weight : 4.5 Kg
- Estimated Lead Time : 8 - 10 weeks.
- Manufacturer : Yokogawa
- Product No. : EJA110E-JMS4G-912DB/FF1/X2/A/D4
- Product type : Differential Pressure Transmitter
- Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
- Wetted parts material : S = Cover flange and process connector ASTM CF-8M, Capsule Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) , Capsule gasket Teflon-coated 316L SST , Vent/Drain plug 316 SST
- Process connections : 4 = With 1/2 NPT female process connector
- Bolts and nuts material : G = 316L SST
- Installation : 9 = Horizontal piping and left side high pressure
- Amplifier housing : 1 = Cast aluminum alloy
- Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
- Integral indicator : D = Digital indicator
- Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
- Shipping weight : 4Kg
-
Estimated Lead Time : 4 - 6 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JMS4G-912EJ/KU22
-
Product Type : Differential Pressure Transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
-
Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : G = 316L SST
-
Installation : 9 = Horizontal piping and left side high pressure
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
-
Integral indicator : E = Digital indicator with the range setting switch (push button)
-
Mounting bracket : J = 316 SST 2-inch pipe mounting, flat type (for horizontal piping)
-
ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic *1 *3
[ATEX Intrinsically safe Ex ic]
Applicable Standard: EN 60079-0:2012, EN 60079-11:2012
II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?30 to 60?C (?22 to 140?F) *2
Ui=30 V, Ci=27.6 nF, Li=0
-
Estimated Lead Time : 2 - 4 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JMS4G-917DB/D4/HE
-
Product Type : Differential Pressure Transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
-
Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : G = 316L SST
-
Installation : 9 = Horizontal piping and left side high pressure
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug*
-
Integral indicator : D = Digital indicator
-
Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
-
Calibration units : D4 = M calibration (kgf/cm2 unit)
-
Fluoro-rubber O-ring : HE = All O-rings of amplifier housing. Lower limit of ambient temperature: ?15?C (5?F)
-
Weight : 2.8 Kg
-
Shipping Weight : 8 Kg
- Estimated Lead Time : 8 - 10 weeks.
- Manufacturer : Yokogawa
- Product No. : EJA110E-JMS4G-917DB/FU1
- Product type : EJA110E Differential Pressure Transmitter
- Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
- Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
- Wetted parts material *2 : S = Cover flange and process connector ASTM CF-8M *1, Capsule Hastelloy C-276 *2(Diaphragm)F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
- Process connections : 4 = With 1/2 NPT female process connector
- Bolts and nuts material : G = 316L SST
- Installation : 9 = Horizontal piping and left side high pressure
- Amplifier housing : 1 = Cast aluminum alloy
- Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug
- Integral indicator : D = Digital indicator*8
- Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
- Integral indicator : D = Digital indicator*8
- Factory Mutual (FM) : FU1 = Combined FF1 and FS1
- Weight : 2.8 Kg
- Shipping weight : 4Kg
-
Estimated Lead Time : 3 - 4 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JMS4G-917DB/NS11
-
Product Type : Differential Pressure Transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
-
Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : G = 316L SST
-
Installation : 9 = Horizontal piping and left side high pressure
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug*
-
Integral indicator : D = Digital indicator
-
Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
-
NS11
-
Weight : 2.8 Kg
-
Shipping Weight : 4 Kg
- Estimated Lead Time : 4 - 6 weeks.
- Manufacturer : Yokogawa
- Product No. : EJA110E-JMS4G-919DD-KU22
- Product type : Differential Pressure Transmitter
- Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
- Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
- Wetted parts material *2 : S = Cover flange and process connector ASTM CF-8M *1, Capsule Hastelloy C-276 *2(Diaphragm)F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
- Process connections : 4 = With 1/2 NPT female process connector
- Bolts and nuts material : G = 316L SST
- Installation : 9 = Horizontal piping and left side high pressure
- Amplifier housing : 1 = Cast aluminum alloy
- Electrical connection : 9 = M20 female, two electrical connections and a blind plug*7
- Integral indicator : D = Digital indicator*8
- Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
- Shipping weight : 4Kg
-
Estimated Lead Time : 4 - 6 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JMS4J-912EB/KU22/D3/M11
-
Product type : EJA110E Differential pressure transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
-
Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : J = B7 carbon steel
-
Installation : 9 = Horizontal piping and left side high pressure
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
-
Integral indicator : E = Digital indicator with the range setting switch (push button)
-
Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
-
ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic
-
Calibration units. : D3 = bar calibration (bar unit)
-
Material certificate. : M11 = Cover flange, Process connector
-
Shipping Weight : 4.5 Kg
-
Estimated Lead Time : 4 - 6 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JMS4J-912NA
-
Product type : EJA110E Differential pressure transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
-
Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : J = B7 carbon steel
-
Installation : 9 = Horizontal piping and left side high pressure
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
-
Integral indicator : N = None
-
Weight : 4.5 Kg
-
Shipping Weight : 8 Kg
-
Estimated Lead Time : 2 - 4 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JMS4J-914NB/D4
-
Product type : EJA110E Differential pressure transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
-
Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : J = B7 carbon steel
-
Installation : 9 = Horizontal piping and left side high pressure
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 4 = M20 female, two electrical connections without blind plugs
-
Integral indicator : N = None
-
Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
-
Calibration units. : D4 = M calibration (kgf/cm2 unit)
-
Shipping Weight : 4.5 Kg
Condition : Brand New
Warranty : 1 Year
Part Number : EJA110E-JMS4J-917DC/NF21
Manufacturer : Yokogawa
- Estimated Lead Time : 4 - 8 weeks.
- Manufacturer : Yokogawa
- Product No. : EJA110E-JMS4J-917EB/D4
- Product type : Differential Pressure Transmitter
- Model : EJA110E = Differential pressure transmitter
- Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
- Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
- Wetted parts material *2 : S = Cover flange and process connector ASTM CF-8M *1 , Capsule Hastelloy C-276 *2(Diaphragm) F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
- Process connections : 4 = with 1/2 NPT female process connector
- Bolts and nuts material : J = B7 carbon steel
- Installation : 9 = Horizontal piping and left side high pressure
- Amplifier housing : 1 = Cast aluminum alloy
- Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug*7
- Integral indicator : E = Digital indicator with the range setting switch (push button)*9
- Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
- Calibration units : D4 = M calibration (kgf/cm2 unit)
- Shipping weight : 5 Kg
- Estimated Lead Time : 8 - 10 weeks.
- Manufacturer : Yokogawa
- Product No. : EJA110E-JMS4J-917EB/KU22
- Product type : Differential Pressure Transmitter
- Model : EJA110E = Differential pressure transmitter
- Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
- Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
- Wetted parts material *2 : S = Cover flange and process
- connector ASTM CF-8M *1 , Capsule Hastelloy C-276 *2(Diaphragm) F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
- Process connections : 4 = with 1/2 NPT female process connector
- Bolts and nuts material : J = B7 carbon steel
- Installation : 9 = Horizontal piping and left side high pressure
- Amplifier housing : 1 = Cast aluminum alloy
- Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug*7
- Integral indicator : E = Digital indicator with the range setting switch (push button)*9
- Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
- Shipping weight : 5Kg
- Estimated Lead Time : 8 - 10 weeks.
- Manufacturer : Yokogawa
- Product No. : EJA110E-JMS4J-919DB/D4
- Product type : EJA110E Differential Pressure Transmitter
- Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
- Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
- Wetted parts material : S = Cover flange and process connector - ASTM CF-8M, Capsule - Hastelloy C-276 (Diaphragm)F316L SST, 316L SST (Others), Capsule gasket - Teflon-coated 316L SST, Vent/Drain plug - 316 SST
- Process connections : 4 = with 1/2 NPT female process connector
- Bolts and nuts material : J = B7 carbon steel
- Installation : 9 = Horizontal piping and left side high pressure
- Amplifier housing : 1 = Cast aluminum alloy
- Electrical connection : 9 = M20 female, two electrical connections and a blind plug
- Integral indicator : D = Digital indicator
- Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
- Calibration units : D4 = M calibration (kgf/cm2 unit)
- Weight : 2.8 Kg
- Shipping Weight : 4 Kg
-
Condition : Brand New
-
Warranty : 1 Year
-
Part Number : EJA110E-JMS5G-72DDK-KS21-M01-T12-D3
-
Manufacturer : Yokogawa
Estimated Lead Time : 8 - 10 weeks.
Manufacturer : Yokogawa
Product No. : EJA110E-JMS5G-912NJ
Product type : Differential Pressure Transmitter
EJA110E : Differential pressure transmitter
J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
M - Measurement span (capsule) : 1 to 100 kPa (4 to 400 inH2O)
S - Wetted parts material
Cover flange and process connector : ASTM CF-8M
Capsule : Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others)
Capsule gasket : Teflon-coated 316 SST
Vent/Drain plug : 316 SST
5 - Process connections See the table in the next page for the codes for a diaphragm seal system : Without process connector (1/4 NPTfemale on the cover flanges)
G - Bolts and nuts material : 316L SST
9 - Installation : Horizontal piping and left side high pressure
1 - Amplifier housing : cast aluminum alloy
2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs
N - Integral indicator : None
J - Mounting bracket : 316 SST 2-inch pipe mounting, flat type (for horizontal piping)
Weight : 2.8 Kg
Shipping weight : 8 Kg
Estimated Lead Time : 2 - 4 weeks.
Manufacturer : Yokogawa
Product No. : EJA110E-JMS5G-912NJ
Product type : Differential Pressure Transmitter
EJA110E : Differential pressure transmitter
J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
M - Measurement span (capsule) : 1 to 100 kPa (4 to 400 inH2O)
S - Wetted parts material
Cover flange and process connector : ASTM CF-8M
Capsule : Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others)
Capsule gasket : Teflon-coated 316 SST
Vent/Drain plug : 316 SST
5 - Process connections See the table in the next page for the codes for a diaphragm seal system : Without process connector (1/4 NPTfemale on the cover flanges)
G - Bolts and nuts material : 316L SST
9 - Installation : Horizontal piping and left side high pressure
1 - Amplifier housing : cast aluminum alloy
2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs
N - Integral indicator : None
J - Mounting bracket : 316 SST 2-inch pipe mounting, flat type (for horizontal piping)
Weight : 2.8 Kg
Shipping weight : 8 Kg
-
Estimated Lead Time : 8 - 10 weeks.
Manufacturer : Yokogawa
Product No. : EJA110E-JMS5G-914DB/KU22/M01/A1
-
Product type : EJA110E Differential Pressure Transmitter
EJA110E : Differential pressure transmitter
J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
M - Measurement span (capsule) : 1 to 100 kPa (4 to 400 inH2O)
S - Wetted parts material
Cover flange and process connector : ASTM CF-8M
Capsule : Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others)
Capsule gasket : Teflon-coated 316 SST
Vent/Drain plug : 316 SST
5 - Process connections See the table in the next page for the codes for a diaphragm seal system : Without process connector (1/4 NPTfemale on the cover flanges)
G - Bolts and nuts material : 316L SST
9 - Installation : Horizontal piping and left side high pressure
1 - Amplifier housing : cast aluminum alloy
-
4 - Electrical connection : M20 female, two electrical connections without blind plugs
-
D - Integral indicator : Digital indicator
-
B - Mounting bracket : 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
-
KU22 : ATEX = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic *1 *3 [ATEX Intrinsically safe Ex ic] Applicable Standard: EN 60079-0:2012+A11:2013, EN 60079-11:2012 II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?30 to 60?C (?22 to 140?F) *2 Ui=30 V, Ci=27.6 nF, Li=0
- Estimated Lead Time : 8 - 10 weeks.
- Manufacturer : Yokogawa
- Product No. : EJA110E-JMS5G-91CEJ
- Product type : Differential Pressure Transmitter
- Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
- Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 1 to 100 kPa (4 to 400 inH2O)inH2O)
- Wetted parts material *2 : S = Cover flange and process connector ASTM CF-8M *1, Capsule Hastelloy C-276 *2 (Diaphragm)F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
- Process connections : G = 316L SST
- Installation : 9 = Horizontal piping and left side high pressureAmplifier housing : 1 = Cast aluminum alloy
- Electrical connection : C = 1/2 NPT female, two electrical connections and a SUS316 blind plug
- Integral indicator : E = Digital indicator with the range setting switch (push button)*9
- Mounting bracket : J = 316 SST 2-inch pipe mounting, flat type (for horizontal piping)
- Shipping weight : 4Kg
-
Estimated Lead Time : 8 - 10 weeks.
Manufacturer : Yokogawa
Product No. : EJA110E-JMS5G-922DJ/KU22
-
Product type : EJA110E Differential Pressure Transmitter
EJA110E : Differential pressure transmitter
J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
M - Measurement span (capsule) : 1 to 100 kPa (4 to 400 inH2O)
S - Wetted parts material
Cover flange and process connector : ASTM CF-8M
Capsule : Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others)
Capsule gasket : Teflon-coated 316 SST
Vent/Drain plug : 316 SST
5 - Process connections See the table in the next page for the codes for a diaphragm seal system : Without process connector (1/4 NPTfemale on the cover flanges)
G - Bolts and nuts material : 316L SST
9 - Installation : Horizontal piping and left side high pressure
-
2 - Amplifier housing : ASTM CF-8M stainless steel*
-
2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs
-
D - Integral indicator : Digital indicator
-
J - Mounting bracket : 316 SST 2-inch pipe mounting, flat type (for horizontal piping)
-
KU22 : ATEX = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic *1 *3 [ATEX Intrinsically safe Ex ic] Applicable Standard: EN 60079-0:2012+A11:2013, EN 60079-11:2012 II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?30 to 60?C (?22 to 140?F) *2 Ui=30 V, Ci=27.6 nF, Li=0
-
Estimated Lead Time : 3 - 6 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JMS5G-92DDN/KS21/D3/N4/M01/T12
-
Product type : EJA110E Differential Pressure Transmitter
-
EJA110E : Differential pressure transmitter
-
J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
M - Measurement span (capsule) : 1 to 100 kPa (4 to 400 inH2O)
-
S - Wetted parts material
-
Cover flange and process connector : ASTM CF-8M
-
Capsule : Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others)
-
Capsule gasket : Teflon-coated 316 SST
-
Vent/Drain plug : 316 SST
-
5 - Process connections See the table in the next page for the codes for a diaphragm seal system : Without process connector (1/4 NPTfemale on the cover flanges)
-
G - Bolts and nuts material : 316L SST
-
9 - Installation : Horizontal piping and left side high pressure
-
2 - Amplifier housing : ASTM CF-8M stainless steel*
-
D - Electrical connection : M20 female, two electrical connections and a SUS316 blind plug
-
D - Integral indicator : Digital indicator
-
N - Mounting bracket : None
-
KS21 : ATEX = ATEX Intrinsically safe Approval *1 *3 Applicable Standard: EN 60079-0:2012+A11:2013, EN 60079-11:2012 Certificate: DEKRA 11ATEX0228 X II 1G, 2D Ex ia IIC T4 Ga, Ex ia IIIC T85?C T100?C T120?C Db Degree of protection: IP66/IP67 Amb. Temp. (Tamb) for EPL Ga: ?50 to 60?C (?58 to 140?F) Maximum Process Temp. (Tp) for EPL Ga:120?C Electrical data: Ui=30 V, Ii=200 mA, Pi=0.9 W, Ci=27.6 nF, Li=0
- Estimated Lead Time : 6 - 8 weeks.
- Manufacturer : Yokogawa
- Product No. : EJA110E-JMS5J-912DD
- Product type : EJA110E Differential pressure transmitter
- Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
- Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
- Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket, 316 SST Vent/Drain plug.
- Process connections : 5 = without process connector (1/4 NPT female on the cover flanges)
- Bolts and nuts material : J = B7 carbon steel
- Installation : 9 = Horizontal piping and left side high pressure
- Amplifier housing : 1 = Cast aluminum alloy
- Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
- Integral indicator : D = Digital indicator
- Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
- Weight : 2.8 Kg
- Shipping weight : 4 Kg
- Condition : Brand New
- Warranty : 1 Years
- Product Number : EJA110E-JMS5J-914EB/HG
- Manufacturer : Yokogawa
- Estimated Lead Time : 4 - 6 weeks.
- Manufacturer : Yokogawa
- Product No. : EJA110E-JVS0G-710DD/NF2/D3/X2
- Product type : EJA110E Differential Pressure Transmitter
- Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
- Measurement span (capsule) : V = 0.14 to 14 MPa (20 to 2000 psi)
- Wetted parts material : S = Cover flange and process connector - ASTM CF-8M, Capsule - Hastelloy C-276 (Diaphragm)F316L SST, 316L SST (Others), Capsule gasket - Teflon-coated 316L SST, Vent/Drain plug - 316 SST
- Process connections : 0 = without process connector (Rc1/4 female on the cover flanges)
- Bolts and nuts material : G = 316L SST
- Installation : 7 = Vertical piping, left side high pressure, and process connection downside
- Amplifier housing : 1 = Cast aluminum alloy
- Electrical connection : 0 = G1/2 female, one electrical connection without blind plugs
- Integral indicator : D = Digital indicator
- Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
- NF2
- Calibration units : D3 = bar calibration (bar unit)
- Painting : X2 = Coating change Anti-corrosion coating
- Shipping Weight : 8 Kg
- Condition : Brand New
- Warranty : 1 Years
- Product Number :EJA110E-JHS4J-832EJ/NS11/D3
- Manufacturer :Yokogawa
-
Estimated Lead Time : 4 - 6 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JVS4J-912EB/KU22/D3/M11
-
Product type : EJA110E Differential pressure transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : V = 0.14 to 14 MPa (20 to 2000 psi)
-
Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 4 = with 1/2 NPT female process connector
-
Bolts and nuts material : J = B7 carbon steel
-
Installation : 9 = Horizontal piping and left side high pressure
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
-
Integral indicator : E = Digital indicator with the range setting switch (push button)
-
Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
-
ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic
-
Calibration units. : D3 = bar calibration (bar unit)
-
Material certificate. : M11 = Cover flange, Process connector
-
Shipping Weight : 4.5 Kg
-
Condition : Brand New
-
Warranty : 1 Year
-
Part Number : EJA110E-JVS5G-72DDK/KS21/M01/T12/D3
-
Manufacturer : Yokogawa
- Estimated Lead Time : 8 - 10 weeks.
- Manufacturer : Yokogawa
- Product No. : EJA110E-JVS5G-91CEJ
- Product type : Differential Pressure Transmitter
- Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1
- Measurement span (capsule) : V = 0.14 to 14 MPa (20 to 2000 psi)
- Wetted parts material *2 : S = Cover flange and process connector ASTM CF-8M *1, Capsule Hastelloy C-276 *2(Diaphragm)F316L SST, 316L SST (Others), Capsule gasket Teflon-coated 316L SST, Vent/Drain plug 316 SST
- Process connections : G = 316L SST
- Installation : 9 = Horizontal piping and left side high pressure
- Amplifier housing : 1 = Cast aluminum alloy
- Electrical connection : C = 1/2 NPT female, two electrical connections and a SUS316 blind plug
- Integral indicator : E = Digital indicator with the range setting switch (push button)*9
- Mounting bracket : J = 316 SST 2-inch pipe mounting, flat type (for horizontal piping)
- Shipping weight : 4Kg
-
Estimated Lead Time : 4 - 6 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA110E-JVS5G-92CEJ/KU22
-
Product Type : Differential Pressure Transmitter
-
Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
-
Measurement span (capsule) : V = 0.14 to 14 MPa (20 to 2000 psi)
-
Wetted parts material : S = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others) Capsule, Teflon-coated 316L SST Capsule gasket , 316 SST Vent/Drain plug.
-
Process connections : 5 = without process connector (1/4 NPT female on the cover flanges)
-
Bolts and nuts material : G = 316L SST
-
Installation : 9 = Horizontal piping and left side high pressure
-
Amplifier housing : 2 = ASTM CF-8M stainless steel
-
Electrical connection : C = 1/2 NPT female, two electrical connections and a SUS316 blind plug
-
Integral indicator : E = Digital indicator with the range setting switch (push button)
-
Mounting bracket : J = 316 SST 2-inch pipe mounting, flat type (for horizontal piping)
-
ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic *1 *3
[ATEX Intrinsically safe Ex ic]
Applicable Standard: EN 60079-0:2012, EN 60079-11:2012
II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?30 to 60?C (?22 to 140?F) *2
Ui=30 V, Ci=27.6 nF, Li=0
- Estimated Lead Time : 8 - 10 weeks.
- Manufacturer : Yokogawa
- Product No. : EJA110E-JVS5J-917EA/T12
- Product type : EJA110E Differential Pressure Transmitter
- Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
- Measurement span (capsule) : V = 0.14 to 14 MPa (20 to 2000 psi)
- Wetted parts material : S = Cover flange and process connector - ASTM CF-8M, Capsule - Hastelloy C-276 (Diaphragm)F316L SST, 316L SST (Others), Capsule gasket - Teflon-coated 316L SST, Vent/Drain plug - 316 SST
- Process connections : 5 = without process connector (1/4 NPT female on the cover flanges)
- Bolts and nuts material : J = B7 carbon steel
- Installation : 9 = Horizontal piping and left side high pressure
- Amplifier housing : 1 = Cast aluminum alloy
- Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug
- Integral indicator : E = Digital indicator with the range setting switch (push button)
- Pressure test/ Leak test certificate : T12= Test Pressure: 16 MPa(2300 psi), Nitrogen(N2) Gas, Retention time: one minute
- Weight : 2.8 Kg
- Shipping Weight : 4 Kg
Condition : Brand New
Warranty : 1 Year
Part Number : EJA110E-JVS5J-919EC/NF21
Manufacturer : Yokogawa
- Manufacturer : Yokogawa
- Product No. : EJA115-DMS400B-22DD
- Product type : Low Flow Transmitter
- Model: EJA115 = Low Flow transmitter
- Output signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)
- Measurement span (capsule) : M = 2 to 100 kPa {200 to 10000 mmH2O}{8 to 400 inH2O}{20 to 1000 mbar}
- Wetted parts material? : S# = [Body] JIS SCS14A?; [Capsule] JIS SUS316L?; [Orifice] JIS SUS316
- Process flange rating : 4 = 1/2 NPT female
- 00 : Always 00
- Bolts and nuts material : B = JIS SUS630; (L capsule) 3.5 MPa {35 kgf/cm?}; (M, H capsule) 14 MPa {140 kgf/cm?}
- Installation : 2 = Vertical impulse piping type, right side high pressure, manifold upside4
- Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plug
- Integral indicator : D = Digital indicator
- Mounting bracket : D = JIS SUS304 or SCS13A 2-inch pipe mounting (L type)
- Shipping weight : 7Kg
- Estimated Lead Time : 8 - 10 weeks.
- Manufacturer : Yokogawa
- Product No. : EJA115E-DMS4G-212DD-N00NN0
- Product type : Low Flow Transmitter
- Output signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)
- Measurement span (capsule) : M = 2 to 100 kPa (8 to 400 inH2O)
- Wetted parts material : S = Cover flange and process connector ASTM CF-8M , Capsule Hastelloy C-276 (Diaphragm) F316L SST, 316L SST (Others) , Capsule gasket Teflon-coated 316L SST , Vent/Drain plug 316 SST
- Process connections 4 = 1/2 NPT female
- Bolts and nuts material : G = For cover flange 316L SST, for process connector 316L SST, for manifold 316L SST
- Installation : 2 = Vertical impulse piping type, right side high pressure, manifold upside
- Amplifier housing : 1 = Cast aluminum alloy
- Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
- Integral indicator : D = Digital indicator
- Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
- N = Always N
- 00 = Always 00
- N = Always N
- N = Always N
- 0 = Always 0
- Shipping weight : 7Kg
-
Estimated Lead Time : 6 - 8 weeks.
-
Manufacturer : Yokogawa
-
Product No. : EJA118E-DMSCG-910DB-WJ13B2TW00-AA22
-
Product type : Diaphragm Sealed Differential Pressure Transmitter
-
Output signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol) (HART 5/HART 7 protocol)
-
Measurement span (capsule) : M = 2.5 to 100 kPa (10 to 400 inH2O)
-
S : always S
-
C : always C
-
Coverflange bolts and nuts material : G = 316L SST
-
Installation : -9 = Horizontal piping type and left side high pressure
-
Amplifier housing : 1 = Cast aluminum alloy
-
Electrical connection : 0 = G 1/2 female, one electrical connection without blind plugs
-
Integral indicator : D = Digital indicator
-
Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
-
Process connection style : W = Flush type
-
Flange rating : J1 = JIS 10K
-
Process connection size (Process flange size) : 3 = 3-inch (80 mm)
-
Flange material : B = 304 SST *11
-
Gasket contact surface : 2 = Flat (no serration)
-
Wetted parts material : TW = Tantalum *7 [Diaphragm], Tantalum *7 [Others]
-
Flushing connection ring : 0 = None
-
Extension : 0 = None
-
Fill fluid : A = For general use (silicone oil)*3, ?10 to 250?C [Process temperature], ?10 to 60?C [Ambient temperature]
-
Capillary connection : A = Side of diaphragm seal unit
-
2 : Always 2
-
Capillary length : 2 = 2 m
Weight : 16.1 Kg
-
Shipping Weight : 19 Kg