For non-Malaysian customers are required to make purchase from NEX Instrument Inc website at
Yokogawa
Sort by
Show result
  • Estimated Lead Time : 2 - 4 weeks.

  • Manufacturer : Yokogawa

  • Product No. :  EJA430E-JAS4G-712EK

  • Product type : Gauge pressure transmitter

  • EJA430E : Gauge pressure transmitter 

  • J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • A - Measurement span (capsule) : 0.03 to 3.5 MPa (4.3 to 500 psi)

  • S - Wetted Parts Materials

  • Cover flange and process connector : ASTM CF-8M

  • Capsule : Hastelloy C-276 *2 (Diaphragm)

  • F316L SST, 316L SST (Others)

  • Capsule gasket : Teflon-co

  • Vent/Drain plug : 316 SST4 - Process connections See the table in the next page for the codes for a diaphragm seal system : with 1/2 NPT

  • female process connectorated 316L SST

  • G - Bolt and nuts material : 316L SST

  • 7 - Installation : Vertical piping, left side high pressure, and process connection down side

  • 1 - Amplifier housing : Cast aluminum alloy

  • 2 - Electrical Connection : 1/2 NPT female, two electrical connections without blind plugs

  • E - Integral indicator : Digital indicator with the range setting switch (push button) 

  • K - 316 SST or SCS14A 2-inch pipe mounting, L type (for vertical piping)

  • Weight : 2.8 Kg 

  • Shipping weight : 3.5 Kg

RM3,569.60
  • Estimated Lead Time : 4 - 8 weeks.

  • Manufacturer : Yokogawa

  • Product No. :

RM3,703.00
  • Estimated Lead Time : 2 - 4 weeks.

  • Manufacturer : Yokogawa

  • Product No. :  EJA430E-JAS4G-912DJ

  • Product type : Gauge Pressure Transmitter

  • EJA430E : Gauge pressure transmitter

  • J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • A - Measurement span (capsule) : 0.03 to 3.5 MPa (4.3 to 500 psi)

  • S - Wetted parts material

  • Cover flange and process connector : ASTM CF-8M

  • Capsule : Hastelloy C-276 (Diaphragm) F316L SST, 316L SST (Others)

  • Capsule gasket : Teflon-coated 316L SST 

  • Vent/Drain plug : 316 SST

  • 4 - Process connections : with 1/2 NPT female process connector

  • G - Bolts and nuts material : 316L SST

  • 9 - installation : Horizontal piping and left side high pressure

  • 1 - Amplifier housing : Cast aluminum alloy

  • 2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

  • D - Integral indicator : Digital indicator 

  • J - Mounting Bracket : 316 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • Weight : 2.8 Kg

  • Shipping weight : 4 Kg

RM3,588.00
  • Estimated Lead Time : 4 - 6 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA430E-JAS4G-917DB/X2/A/D3/M11

  • Product Type : Gauge Pressure Transmitter

  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : A = 0.03 to 3.5 MPa (4.3 to 500 psi)

  • Wetted parts material : S =

    • Cover flange and process connector : ASTM CF-8M *1

    • Capsule : Hastelloy C-276 *2 (Diaphragm), F316L SST, 316L SST (Others)

    • Capsule gasket : Teflon-coated 316L SST

    • Vent/Drain plug : 316 SST

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts materia : G = 316L SST

  • Installation : 9 = Horizontal piping and left side high pressure

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug

  • Integral indicator : D : Digital indicator

  • Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • Painting, Coating change : X2 = Anti-corrosion coating

  • Lightning protector : A = Transmitter power supply voltage: 10.5 to 32 V DC ( 10.5 to 30 V DC for intrinsically safe type, 9 to 32 V DC for Fieldbus communication type.) Allowable current: Max. 6000 A ( 1?40

RM2,860.00
  • Condition : Brand New
  • Warranty : 1 Years
  • Product Number :DY025-EBLAA1-3D/L2/K1/A/SY
  • Manufacturer :Yokogawa
RM5,225.00
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA430E-JAS5J-912EB

  • Product type : Gauge Pressure Transmitter

  • EJA430E - Gauge pressure transmitter

  • J - Output Signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • A - Measurement span (capsule) : 0.03 to 3.5 MPa (4.3 to 500 psi)

  • S - Wetted parts material

  • Cover flange and process connector : ASTM CF-8M

  • Capsule : Hastelloy C-276 (Diaphragm) F316L SST, 316L SST (Others)

  • Capsule gasket : Teflon-coated 316L SST

  • Vent/drain plug : 316 SST

  • 5 - Process connections See the table in the next page for the codes for a diaphragm seal system : without process connector (1/4 NPT female on the cover flanges)

  • J - Bolts and nuts material : B7 carbon steel

  • 9 - Installation : Horizontal piping and left side high pressure

  • 1 - Amplifier housing : Cast aluminum alloy

  • 2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

  • E - Integral indicator : Digital indicator with the range setting switch (push button)

  • B - Mounting bracket : 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • Shipping weight : 5 Kg

RM5,271.60
  • Estimated Lead Time : 6 - 8 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA430E-JBS4G-312DC/KU22/D4

  • Product type : EJA430E Gauge Pressure Transmitter

  • EJA430E : Gauge pressure transmitter

  • J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • B - Measurement span (capsule) : 0.14 to 16 MPa (20 to 2300 psi)

  • S - Wetted parts material

  • Cover flange and process connector : ASTM CF-8M

  • Capsule : Hastelloy C-276 (Diaphragm) F316L SST, 316L SST (Others)

  • Capsule gasket : Teflon-coated 316L SST 

  • Vent/Drain plug : 316 SST

  • 4 - Process connections : with 1/2 NPT female process connector

  • G - Bolts and nuts material : 316L SST

  • 3 - installation : Vertical piping, right side high pressure, and process connection down side

  • 1 - Amplifier housing : Cast aluminum alloy

  • 2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

  • D - Integral indicator : Digital indicator

  • C- Mounting Bracket

  • KU22 - ATEX : Combined KF22, KS21 and ATEX Intrinsically safe Ex ic *1*3 [ATEX Intrinsically safe Ex ic] Applicable Standard: EN 60079-0:2012, EN 60079-11:2012 II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?30 to 60?C (?22 to 140?F) *2 Ui=30 V, Ci=27.6 nF, Li=0

RM4,841.80
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA430E-JBS4G-312ND/KU22

  • Product type : EJA430E Gauge Pressure Transmitter

  • EJA430E : Gauge pressure transmitter

  • J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • B - Measurement span (capsule) : 0.14 to 16 MPa (20 to 2300 psi)

  • S - Wetted parts material

  • Cover flange and process connector : ASTM CF-8M

  • Capsule : Hastelloy C-276 (Diaphragm) F316L SST, 316L SST (Others)

  • Capsule gasket : Teflon-coated 316L SST 

  • Vent/Drain plug : 316 SST

  • 4 - Process connections : with 1/2 NPT female process connector

  • G - Bolts and nuts material : 316L SST

  • 3 - installation : Vertical piping, right side high pressure, and process connection down side

  • 1 - Amplifier housing : Cast aluminum alloy

  • 2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

  • N - Integral indicator : None

  • D- Mounting Bracket : 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)

  • KU22 - ATEX : Combined KF22, KS21 and ATEX Intrinsically safe Ex ic *1*3 [ATEX Intrinsically safe Ex ic] Applicable Standard: EN 60079-0:2012, EN 60079-11:2012 II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?30 to 60?C (?22 to 140?F) *2 Ui=30 V, Ci=27.6 nF, Li=0

RM4,064.00
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA430E-JBS4G-912EB/KF22/A/D1/M11/T12

  • Product Type : Gauge pressure transmitter

  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : B = 0.14 to 16 MPa (20 to 2300 psi)

  • Wetted parts material : S

    • Cover flange and process connector : ASTM CF-8M

    • Capsule : Hastelloy C-276 (Diaphragm) F316L SST, 316L SST (Others)

    • Capsule gasket : Teflon-coated 316L SST 

    • Vent/Drain plug : 316 SST

  • Process connections : 4 = with 1/2 NPT female process connector

  • Bolts and nuts material : G = 316L SST

  • Installation : 9 = Horizontal piping and left side high pressure

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

  • Integral indicator : E = Digital indicator with the range setting switch (push button)

  • Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • ATEX : KF22 = ATEX Flameproof Approval
    Applicable Standard: EN 60079-0:2012/A11:2013, EN 60079-1:2007, EN 60079-31:2009
    Certificate: KEMA 07ATEX0109 X
    II 2G, 2D Ex d IIC T6...T4 Gb, Ex tb IIIC T85?C Db
    Degree of protection: IP66/IP67
    Amb. Temp. (Tamb) for gas-proof :
    T4; ?50 to 75?C (?58 to 167?F), T5; ?50 to 80?C (?58 to 176?F), T6; ?50 to 75?C (?58 to 167?F)
    Process Temp. for gas-proof (Tp):
    T4; ?50 to 120?C (?58 to 248?F), T5; ?50 to 100?C (?58 to 212?F), T6; ?50 to 85?C (?58 to 185?F)
    Max. surface Temp. for dust-proof: T85?C (Tamb: ?30 to 75?C, Tp: ?30 to 85?C)

  • Lightning protector : A = Transmitter power supply voltage: 10.5 to 32 V DC ( 10.5 to 30 V DC for intrinsically safe type, 9 to 32 V DC for Fieldbus communication type.) Allowable current: Max. 6000 A ( 1?40

RM4,985.00
  • Condition : Brand New
  • Warranty : 1 Years
  • Product Number : EJA430E-JBS5G-72DDK/KS21/M01/T12/D3
  • Manufacturer : Yokogawa
RM6,514.00
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA438E-DASCG-910DA-WA12B1SW00-AA27

  • Product Type : Diaphragm sealed gauge pressure transmitter

  • Output signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)

  • Measurement span (capsule) : A = 0.06 to 3.5 MPa (8.6 to 500 psi)

  • S : Always S

  • C : Always C

  • Coverflange bolts and nuts material : G = 316L SST

  • Installation : 9 = Horizontal piping type and left side high pressure

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : 0 = G 1/2 female, one electrical connection without blind plugs
  • Integral indicator : D = Digital indicator

  • Mounting bracket : A

  • Process connection style : W = Flush type

  • Flange rating : A1 = ANSI class 150

  • Process connection size (Process flange size) : 2 = 2-inch (50 mm)

  • Flange material : B = 304 SST

  • Gasket contact surface : 1 = Serration (for ANSI flange with wetted parts material SW only) Flat (no serration)

  • Wetted parts material : SW = [Diaphragm] = 316L SST, [Others] = 316L SST

  • Flushing connection ring : 0 = Ring = None, Vent/Drain plugs = -, Material = -

  • Extension : 0 = None

  • Fill fluid : A = Process temperature : For general use (silicone oil), Ambient temperature = ?10 to 250?C ?10 to 60?C

  • Capillary connection : A = Side of diaphragm seal unit

  • 2 : Always 2

  • Capillary length : 7 = 7m

  • Weight : approx. 9.8 Kg

  • Shipping Weight : 11 Kg

RM6,312.00
  • Condition : Brand New

  • Warranty : 1 Years

  • Product Number : EJA438E-DASCG-917DB-WA12B2SW00-AA27/KU22/D3/HE

  • Manufacturer :Yokogawa

RM5,808.00
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : EJA438E Diaphragm Sealed Gauge Pressure Transmitter

  • Product No. : EJA438E-DASCJ-912DB-WJ12A2SW00-CA23

  • Product type : Yokogawa

  • EJA438E : Diaphragm sealed gauge pressure transmitter

  • D - 4 to 20 mA DC with digital communication (BRAIN protocol)

  • A - Measurement span (capsule) : 0.06 to 3.5 MPa (8.6 to 500 psi)

  • S : Always S

  • C : Always C

  • J - Coverflange bolts and nuts material : B7 carbon steel

  • 9 - Installation : Horizontal piping type and left side high pressure

  • 1 - Amplifier housing : Cast aluminum alloy

  • 2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

  • D - Integral indicator : Digital indicator

RM8,082.20
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA438E-JASCC-912NN-ED43C2SE00-BB22/D4

  • Product type : EJA438E Diaphragm sealed gauge pressure transmitter

  • EJA438E : Diaphragm sealed gauge pressure transmitter

  • J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • A - Measurement span (capsule) : 0.06 to 3.5 MPa (8.6 to 500 psi)

  • S : Always S

  • C : Always C

  • C - Coverflange bolts and nuts material : 660 SST

  • 9 - Installation : Horizontal piping type and left side high pressure

  • 1 - Amplifier housing : Cast aluminum alloy

  • 2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

  • N - Integral indicator : None

  • N - Mounting bracket : None

  • E - Process connection style : Extended type

  • D4 - Flange rating : DIN PN25/40 

  • 3 - Process connection size (Process flange size) : 3-inch (80 mm)

  • C - Flange material : 316 SST

  • 2 - Gasket Contact surface : Flat (no serration)

  • SE - Wetted parts material : 316L SST(Diaphragm), 316 SST (pipe), 316 SST (others)

  • 0 - Flushing connection ring : None

  • 0 - Extension : none

  • B - Fill Fluid : For general use (silicone oil)

  • process temperature : ?30 to 180?C

  • Ambient temperature : ?15 to 60?C

  • B - Capillary connection : Back of diaphragm seal unit

  • 2 : Always 2

  • 2 : Capillary length : 2 m

  • D4 - Calibration units : M calibration (kgf/cm2 unit)

  • Weight : 12.2 Kg

  • Shipping weight : 13.5 Kg

RM7,783.20
  • Estimated Lead Time : 2 - 4 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA438E-JASCG-912DJ-WD42C2SWB0-AA2A/KF22

  • Product type : EJA438E Diaphragm sealed gauge pressure transmitter

  • EJA438E : Diaphragm sealed gauge pressure transmitter

  • J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • A - Measurement span (capsule) : 0.06 to 3.5 MPa (8.6 to 500 psi)

  • S : Always S

  • C : Always C

  • G - Coverflange bolts and nuts material : 316L SST

  • 9 - Installation : Horizontal piping type and left side high pressure

  • 1 - Amplifier housing : Cast aluminum alloy

  • 2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

  • D - Integral indicator : Digital indicator 

  • J - Mounting bracket : 316 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • W - Process connection style : Flush type

  • D4 - Flange rating : DIN PN25/40 

  • 2 - Process connection size (Process flange size) : 2-inch(50mm)

  • C - Flange material : 316 SST

  • 2 - Gasket Contact surface : Flat (no serration)

  • SW - Wetted parts material : 316L SST(Diaphragm) 316L SST (others)

  • B - Flushing connection ring : Straight type (ring) 1/4 NPT connections (vent/drain plugs) 316 SST (material)

  • 0 - extension : none

  • A - Fill Fluid : For general use (silicone oil)

  • process temperature : ?10 to 250?C 

  • Ambient temperature : ?10 to 60?C

  • A - Capillary connection : Side of diaphragm seal unit

  • 2 : Always 2

  • A : Capillary length : 10 m

  • KF22 - ATEX : ATEX Flameproof Approval

  • Weight : 9.8 Kg

  • Shipping weight : 11 Kg

RM5,906.40
  • Condition : Brand New
  • Warranty : 1 Years
  • Product Number : EJA438E-JASCG-917DB-WA13C1SW00-AA25/KF22/M2W/T52
  • Manufacturer : Yokogawa
RM10,920.00
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA438E-JASCG-919DB-WD23B2SW00-BA23

  • Product type : EJA438E Diaphragm sealed gauge pressure transmitter

  • EJA438E : Diaphragm sealed gauge pressure transmitter

  • J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

  • A - Measurement span (capsule) : 0.06 to 3.5 MPa (8.6 to 500 psi)

  • S : Always S

  • C : Always C

  • G - Coverflange bolts and nuts material : 316L SST

  • 9 - Installation : Horizontal piping type and left side high pressure

  • 1 - Amplifier housing : Cast aluminum alloy

  • 9 - Electrical connection : M20 female, two electrical connections with a blind plug

  • D - Integral indicator : Digital indicator 

  • B - Mounting bracket : 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

  • W - Process connection style : Flush type

  • D2 - Flange rating : DIN PN10/16

  • 3 - Process connection size (Process flange size) : 3-inch (80 mm)

  • B - Flange material : 304 SST

  • 2 - Gasket Contact surface : Flat (no serration)

  • SW - Wetted parts material : 316L SST(Diaphragm) 316L SST (others)

  • 0 - Flushing connection ring : None

  • 0 - extension : none

  • B - Fill Fluid : For general use (silicone oil)

  • Process temperature : ?30 to 180?C

  • Ambient temperature : ?15 to 60?C

  • A - Capillary connection : Side of diaphragm seal unit

  • 2 : Always 2

  • 3 : Capillary length : 3 m

  • Weight : 9.8 Kg

  • Shipping weight : 13 Kg

RM6,831.00
  • Condition : Brand New
  • Warranty : 1 Years
  • Product Number : EJA438E-JBSCG-919DN-WA22C1HW00-BA23/KU22
  • Manufacturer : Yokogawa
RM12,950.00
  • Condition : Brand New
  • Warranty : 1 Years
  • Product Number : EJA440E-DCS4G-719DD/HE/D3/KF22/T09
  • Manufacturer : Yokogawa
RM6,550.00
  • Condition : Brand New
  • Warranty : 1 Years
  • Product Number : EJA440E-DDS4G-73DDD/HE/D3/KF22/T08
  • Manufacturer : Yokogawa
RM7,631.00
  • Estimated Lead Time : 4 - 6 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA440E-JCS4J-312DD
  • Product type : EJA440E Gauge Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
  • Measurement span (capsule) : C = 5 to 32 MPa (720 to 4500 psi)
  • Wetted parts material : S = F316 SST Cover flange, ASTM CF-8M *1 (C-capsule) 316 SST (D-capsule) Process connector, Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others), Teflon-coated 316L SST Capsule gasket, 316 SST Vent/Drain plug.
  • Process connections : 4 = with 1/2 NPT female process connector
  • Bolts and nuts materia : J = B7 carbon steel
  • Installation : 3 = Vertical piping, right side high pressure, and process connection down side
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
  • Integral indicator : D = Digital indicator
  • Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)
  • Shipping weight : 8 Kg
RM4,356.00
  • Estimated Lead Time : 8 - 10 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA510E-JBS4N-017EL/KU22
  • Product type : Absolute Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC Output with digital communication
  • Measurement span (capsule) : B = 0.1 to 2 MPa (14.5 to 290 psi)
  • Wetted parts material : S = Process connector 316L SST # , Diaphragm Hastelloy C-276 *3#, Others 316L SST #
  • Process connections : 4 = 1/2 NPT female
  • N = Always N
  • 0 = Always 0
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 7 = 1/2 NPT female, two electrical connections with a blind plug*7
  • Integral indicator : E = Digital indicator with the range setting switch (push button) *9
  • Mounting bracket : L = 316 SST 2-inch pipe mounting
  • Shipping weight : 4Kg
RM4,149.20
  • This product has been replaced with EJA530E-JBS7N-019DN/D3/N4/T06 Gauge Pressure Tansmitter

  • Manufacturer : Yokogawa

  • Product No. : EJA530A-EBS7N-07DF/HAC

  • Product type : EJA530A Gauge Pressure Transmitter

  • EJA530A : Gauge pressure transmitter

  • E - Output signal : 4 to 20 mA DC with digital communication (HART protocol, see IM 01C22T01-01E)

  • B - Measurement span (capsule) : 0.1 to 2 MPa {1 to 20 kgf/cm2}

  • S - Wetted parts material : SUS316L Hastelloy C-276 

  • 7 - Process connection : 1/2 NPT male

  • N - Always N

  • 0 - Always 0

  • 7 - Electrical connection : 1/2 NPT female, two electrical connections and a blind plug

  • D - Integral indicator : Digital indicator

  • F - Mounting bracket : SUS304 2-inch pipe mounting

  • High Accuracy type : HAC = High Accuracy (Applicable for Model EJA530A)

  • Weight : 1.6 Kg

  • Shipping weight : 2.5 Kg

RM3,574.20
  • Estimated Lead Time : 2 - 4 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA530A-ECS4N-04DF/KU11/X1
  • Product type : Gauge Pressure Transmitter
  • Output signal : E = 4 to 20 mA DC with digital communication (HART protocol, refer to GS 01C22T01-00E)
  • Measurement span (capsule) : C = 0.5 to 10 MPa {5 to 100 kgf/cm2} {72.5 to 1450 psi} {5 to 100 bar}
  • Wetted parts material *2 : S = [Process Connection] SUS316L *4,[Diaphragm] Hastelloy C-276 *3
  • Process connection : 4 = 1/2 NPT female
  • N = Always N
  • 0 = Always 0
  • Electrical connection : 4 = M20 female, two electrical connections without blind plug
  • Integral indicator : D = Digital indicator
  • Mounting bracket : F = SUS304 2-inch pipe mounting
  • Shipping weight : 4Kg
RM3,578.80
  • Estimated Lead Time : 4 - 6 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA530A-EDS4N-02EF/KU2

  • Product type : Gauge pressure transmitter

  • EJA530A : Gauge pressure transmitter

  • E - Output signal : 4 to 20 mA DC with digital communication (HART protocol, see IM 01C22T01-01E)

  • D - Measurement span (capsule) : 5 to 50 MPa {50 to 500 kgf/cm2}

  • S - Wetted parts material : SUS316L Hastelloy C-276 

  • 4 - Process connection : 1/2 NPT female

  • N - Always N

  • 0 - Always 0

  • 2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plug

  • E - Integral indicator : Digital indicator with the range setting switch

  • F - Mounting bracket : SUS304 2-inch pipe mounting

  • Shipping weight : 10 Kg

RM3,463.80
  • Estimated Lead Time : 4 - 6 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA530A-FBS4N-09DF/M15/HAC/T06/D3/KS25/LC1/X1

  • Product type : Gauge pressure transmitter

  • EJA530A - Gauge pressure transmitter

  • F - Output signal : Digital communication(FOUNDATION Fieldbus protocol, refer to

  • GS 01C25T02-01EN)

  • B - Measurement span : 0.1 to 2 MPa {1 to 20 kgf/cm2}

  • S - Wetted parts material : Process connection SUS316L, Diaphragm Hastelloy C-276

  • 4 - Process connections : 1/2 NPT female

  • N - Always N

  • 0 - Always 0

  • 9 - ELectrical connection : M20 female, two electrical connections and a blind plug

  • D - integral Indicator : Digital indicator

  • F - Mounting bracket : SUS304 2-inch pipe mounting

  • M15 - Mill Certificate : Process connector

  • HAC - High Accuracy type : High Accuracy (Applicable for Model EJA530A)

  • T06 - Pressure test/Leak test Certificate : Test Pressure: 2 MPa{20 kgf/cm2}

  • D3 - Calibration units : bar calibration (bar unit )

  • X1 - Painting Coating change : Epoxy resin-baked coating

  • Shipping weight : 10 Kg

RM5,989.20
  • Condition : Brand New
  • Warranty : 1 Years
  • Product Number : EJA530E-JAS4N-014EL
  • Manufacturer : Yokogawa
RM4,233.60
  • Condition : Brand New
  • Warranty : 1 Years
  • Product Number : EJA530E-JAS7N-019DL
  • Manufacturer : Yokogawa
RM2,786.00
  • Estimated Lead Time : 4 - 6 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA530E-JAS7N-019EN/D3/N4/M15

  • Product type : EJA530E Gauge Pressure Transmitter

  • EJA530E : Gauge Pressure Tansmitter

  • J - Output signal : 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

  • A - Measurement span (capsule) : 10 to 200 kPa (1.45 to 29 psi)

  • S - Wetted parts material 

  • Process connector : 316L SST

  • Diaphragm : Hastelloy C-276

  • Others : 316L SST

  • 7 - Process connection : 1/2 NPT male

  • N - Always N

  • 0 - Always 0

  • 1 - Amplifier housing : Cast aluminum alloy

  • 9 - Electrical connection : M20 female, two electrical connections with a blind plug

  • E - integral indicator : Digital indicator with the range setting switch (push button)

  • N - Mounting bracket : None

  • D3 - Calibration units : bar calibration (bar unit)

  • N4 - Wired tag plate : 316 SST tag plate wired onto transmitter

  • M15 - Material certificate : Process Connector

  • Weight : 1.2 Kg

  • Shipping weight : 2.5 Kg
RM2,944.00
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. :  EJA530E-JAS8N-019DN/KS21/D4

  • Product type : EJA530E Gauge Pressure Transmitter

  • Output signal : J = 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : A = 10 to 200 kPa (1.45 to 29 psi)

  • Wetted parts material : S = 316L SST Process connector, Hastelloy C-276 Diaphragm, 316L SST Others.

  • Process connections : 8 = G1/2 DIN 16 288 male

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : 9 = M20 female, two electrical connections with a blind plug

  • Integral indicator : D = Digital indicator

  • Mounting bracket : N = None

  • ATEX : KS21 = ATEX Intrinsically safe Approval *1*3 Applicable Standard: EN 60079-0:2012/A11:2013, EN 60079-11:2012, EN 60079-26:2007 Certificate: DEKRA 11ATEX0228 X II 1G, 2D Ex ia IIC T4 Ga, Ex ia IIIC T85?C T100?C T120?C Db Degree of protection: IP66/IP67 Amb. Temp. (Tamb) for EPL Ga: ?50 to 60?C (?58 to 140?F) Maximum Process Temp. (Tp) for EPL Ga:120?C Electrical data: Ui=30 V, Ii=200 mA, Pi=0.9 W, Ci=27.6 nF, Li=0 µH Amb. Temp. for EPL Db: –30 to 60°C *2 Max. surface Temp. for EPL Db: T85°C (Tp: 80°C), T100°C (Tp: 100°C), T120°C (Tp: 120°C)

  • Calibration units : D4 = M calibration (kgf/cm2 unit)

  • Weight : 1.2 Kg

  • Shipping Weight : 2.5 Kg

RM2,530.00
  • Estimated Lead Time : 4 - 6 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA530E-JBH8N-019EL/D3

  • Product type : EJA530E Gauge Pressure Transmitter

  • EJA530E : Gauge Pressure Tansmitter

  • J - Output signal : 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

  • B - Measurement span (capsule) : 0.1 to 2 MPa (14.5 to 290 psi)

  • H - Wetted parts material 

  • Process connector : Hastelloy C-276

  • Diaphragm : Hastelloy C-276

  • Others : Hastelloy C-276

  • 8 - Process connection : G1/2 DIN 16 288 male

  • N - Always N

  • 0 - Always 0

  • 1 - Amplifier housing : Cast aluminum alloy

  • 9 - Electrical connection : M20 female, two electrical connections with a blind plug

  • E - integral indicator : Digital indicator with the range setting switch (push button)

  • L - Mounting bracket : 316 SST 2-inch pipe mounting

  • D3 - Calibration units : bar calibration (bar unit)

  • Weight : 1.2 Kg

  • Shipping weight : 2.5 Kg
RM6,196.30
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA530E-JBS4N-012DL/D4

  • Product type : EJA530E Gauge Pressure Transmitter

  • EJA530E : Gauge Pressure Tansmitter

  • J - Output signal : 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

  • B - Measurement span (capsule) : 0.1 to 2 MPa (14.5 to 290 psi)

  • S - Wetted parts material 

  • Process connector : 316L SST

  • Diaphragm : Hastelloy C-276

  • Others : 316L SST

  • 4 - Process connection : 1/2 NPT female

  • N - Always N

  • 0 - Always 0

  • 1 - Amplifier housing : Cast aluminum alloy

  • 2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

  • D - integral indicator : Digital indicator

  • L - Mounting bracket : 316 SST 2-inch pipe mounting

  • D4 - Calibration units : M calibration (kgf/cm2 unit)

  • Weight : 1.2 Kg

  • Shipping weight : 2.5 Kg
RM3,003.80
  • Estimated Lead Time : 8 - 10 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA530E-JBS4N-012EL
  • Product type : EJA530E Gauge Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)
  • Measurement span (capsule) : B = 0.1 to 2 MPa (14.5 to 290 psi)
  • Wetted parts material : S = Process connector 316L SST #, Diaphragm Hastelloy C-276 *3#, Others 316L SST #
  • Process connections : 4 = 1/2 NPT female
  • N = Always N
  • 0 = Always 0
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
  • Integral indicator : E = Digital indicator with the range setting switch (push button)
  • Mounting bracket : L = 316 SST 2-inch pipe mounting
  • Shipping weight : 3 Kg
RM3,003.80
  • Estimated Lead Time : 4 - 6 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA530E-JBS4N-012EL/KU22/D3/M15
  • Product type : EJA530E Gauge Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)
  • Measurement span (capsule) : B = 0.1 to 2 MPa (14.5 to 290 psi)
  • Wetted parts material : S = Process connector 316L SST #, Diaphragm Hastelloy C-276 *3#, Others 316L SST #
  • Process connections : 4 = 1/2 NPT female
  • N = Always N
  • 0 = Always 0
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
  • Integral indicator : E = Digital indicator with the range setting switch (push button)
  • Mounting bracket : L = 316 SST 2-inch pipe mounting
  • ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic
  • Calibration units : D3 = bar calibration (bar unit)
  • Material certificate : M15 = Process Connector
  • Shipping weight : 3Kg
RM3,707.60
  • Condition : Brand New
  • Warranty : 1 Years
  • Product Number : EJA530E-JBS4N-014EL
  • Manufacturer : Yokogawa
RM4,233.60
  • Estimated Lead Time : 2 - 4 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA530E-JBS4N-014NN/KU22/D3/M15/T06
  • Product Type : Gauge Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)*1
  • Measurement span (capsule) : B = 0.1 to 2 MPa (14.5 to 290 psi)
  • Wetted parts material *2 : S = Process connector :316L SST # Diaphragm:Hastelloy C-276 *3# Others:316L SST #
  • Process connections * For a diaphragm seal system, refer to process connections code table
  • (p.6). : 4 = 1/2 NPT female
  • N = Always N
  • 0 = Always 0
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 4 = M20 female, two electrical connections without blind plugs
  • Integral indicator : N = (None)
  • Mounting bracket : N = None
  • ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic *1*3 [ATEX Intrinsically safe Ex ic] Applicable Standard: EN 60079-0:2012/A11:2013, EN 60079-11:2012 II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?30 to 60?C (22 to 140?F) *2 Ui=30 V, Ci=27.6 nF, Li=0
RM3,726.00
  • Estimated Lead Time : 4 - 6 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA530E-JBS4N-019DL/KU22
  • Product type : Gauge Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC Output with digital communication
  • Measurement span (capsule) : B = 0.1 to 2 MPa (14.5 to 290 psi)
  • Wetted parts material *2 : S = Process connector 316L SST #, Diaphragm Hastelloy C-276 *3#, Others 316L SST #
  • Process connections : 4 = 1/2 NPT female
  • Always N
  • Always 0
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 9 = M20 female, two electrical connections with a blind plug*7
  • Integral indicator : D = Digital indicator *8
  • Mounting bracket : L = 316 SST 2-inch pipe mounting
  • Shipping weight : 3Kg
RM3,551.20
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA530E-JBS4N-024DL/KS21/D3/N4/M15/T06

  • Product type : EJA530E Gauge Pressure Transmitter

  • EJA530E : Gauge Pressure Tansmitter

  • J - Output signal : 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

  • B - Measurement span (capsule) : 0.1 to 2 MPa (14.5 to 290 psi)

  • S - Wetted parts material 

  • Process connector : 316L SST

  • Diaphragm : Hastelloy C-276

  • Others : 316L SST

  • 4 - Process connection : 1/2 NPT female

  • N - Always N

  • 0 - Always 0

  • 2 - Amplifier housing : ASTM CF-8M stainless steel

  • 4 - Electrical connection : M20 female, two electrical connections without blind plugs

  • D - integral indicator : Digital indicator

  • L - Mounting bracket : 316 SST 2-inch pipe mounting

  • ATEX : KS21 = ATEX Intrinsically safe Approval *1*3 Applicable Standard: EN 60079-0:2012/A11:2013, EN 60079-11:2012, EN 60079-26:2007 Certificate: DEKRA 11ATEX0228 X II 1G, 2D Ex ia IIC T4 Ga, Ex ia IIIC T85?C T100?C T120?C Db Degree of protection: IP66/IP67 Amb. Temp. (Tamb) for EPL Ga: ?50 to 60?C (?58 to 140?F) Maximum Process Temp. (Tp) for EPL Ga:120?C Electrical data: Ui=30 V, Ii=200 mA, Pi=0.9 W, Ci=27.6 nF, Li=0

RM4,885.00
  • Estimated Lead Time : 8 - 10 weeks.

  • Product replacement for EJA530A-EBS7N-07DF/HAC Gauge Pressure Tansmitter

  • Manufacturer : Yokogawa

  • Product No. : EJA530E-JBS7N-017DL/HAC

  • Product type : EJA530E Gauge Pressure Tansmitter

  • EJA530E : Gauge Pressure Tansmitter

  • J - Output signal : 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

  • B - Measurement span (capsule) : 0.1 to 2 MPa (14.5 to 290 psi)

  • S - Wetted parts material 

  • Process connector : 316L SST

  • Diaphragm : Hastelloy C-276

  • Others : 316L SST

  • 7 - Process connection : 1/2 NPT male

  • N - Alaways N

  • 0 - Always 0

  • 1 - Amplifier housing : Cast aluminum alloy

  • 7 - Electrical connection : 1/2 NPT female, two electrical connections with a blind plug

  • D - integral indicator : Digital indicator

  • L - Mounting bracket : 316 SST 2-inch pipe mounting

  • HAC - High accuracy type : High accuracy

  • Weight : 1.2 Kg

  • Shipping weight : 2.5 Kg
RM3,574.20
  • Estimated Lead Time : 4 - 6 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA530E-JBS7N-019DL/D3/N4/M15

  • Product type : EJA530E Gauge Pressure Transmitter

  • EJA530E : Gauge Pressure Tansmitter

  • J - Output signal : 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

  • B - Measurement span (capsule) : 0.1 to 2 MPa (14.5 to 290 psi)

  • S - Wetted parts material 

  • Process connector : 316L SST

  • Diaphragm : Hastelloy C-276

  • Others : 316L SST

  • 7 - Process connection : 1/2 NPT male

  • N - Always N

  • 0 - Always 0

  • 1 - Amplifier housing : Cast aluminum alloy

  • 9 - Electrical connection : M20 female, two electrical connections with a blind plug

  • D - integral indicator : Digital indicator

  • L - Mounting bracket : 316 SST 2-inch pipe mounting

  • D3 - Calibration units : bar calibration (bar unit)

  • N4 - Wired tag plate : 316 SST tag plate wired onto transmitter

  • M15 - Material certificate : Process Connector

  • Weight : 1.2 Kg

  • Shipping weight : 2.5 Kg
RM2,944.00
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA530E-JBS7N-019DL/D3/N4/T06

  • Product type : Gauge Pressure Tansmitter

  • EJA530E : Gauge Pressure Tansmitter

  • J - Output signal : 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

  • B - Measurement span (capsule) : 0.1 to 2 MPa (14.5 to 290 psi)

  • S - Wetted parts material 

  • Process connector : 316L SST

  • Diaphragm : Hastelloy C-276

  • Others : 316L SST

  • 7 - Process connection : 1/2 NPT male

  • N - Alaways N

  • 0 - Always 0

  • 1 - Amplifier housing : Cast aluminum alloy

  • 9 - Electrical connection : M20 female, two electrical connections with a blind plug

  • D - integral indicator : Digital indicator

  • L - Mounting bracket : 316 SST 2-inch pipe mounting

  • D3 - Calibration units : bar calibration (bar unit)

  • N4 - Wired tag plate : 316 SST tag plate wired onto transmitter

  • T06 - Pressure test/Leak test certificate : Test Pressure: 2 MPa (290 psi)

  • Shipping weight : 10 Kg

RM4,158.40
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA530E-JBS7N-019DL/KS21/D3/N4/T06/K2

  • Product type : Gauge Pressure Tansmitter

  • EJA530E : Gauge Pressure Tansmitter

  • J - Output signal : 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

  • B - Measurement span (capsule) : 0.1 to 2 MPa (14.5 to 290 psi)

  • S - Wetted parts material 

  • Process connector : 316L SST

  • Diaphragm : Hastelloy C-276

  • Others : 316L SST

  • 7 - Process connection : 1/2 NPT male

  • N - Alaways N

  • 0 - Always 0

  • 1 - Amplifier housing : Cast aluminum alloy

  • 9 - Electrical connection : M20 female, two electrical connections with a blind plug

  • D - integral indicator : Digital indicator

  • L - Mounting bracket : 316 SST 2-inch pipe mounting

  • KS21 - ATEX : ATEX Intrinsically safe Approval

  • D3 - Calibration units : bar calibration (bar unit)

  • N4 - Wired tag plate : 316 SST tag plate wired onto transmitter

  • T06 - Pressure test/Leak test certificate : Test Pressure: 2 MPa (290 psi)

  • K2 - Oil-prohibited use : Degrease cleansing treatment with fluorinated oilfilled capsule.

  • Operating temperature -20 to 80?C (-4 to 176?F)

  • Shipping weight : 10 Kg
RM5,386.60
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA530E-JBS7N-019DN/D3/N4/T06 

  • Product type : Gauge Pressure Tansmitter

  • EJA530E : Gauge Pressure Tansmitter

  • J - Output signal : 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

  • B - Measurement span (capsule) : 0.1 to 2 MPa (14.5 to 290 psi)

  • S - Wetted parts material 

  • Process connector : 316L SST

  • Diaphragm : Hastelloy C-276

  • Others : 316L SST

  • 7 - Process connection : 1/2 NPT male

  • N - Alaways N

  • 0 - Always 0

  • 1 - Amplifier housing : Cast aluminum alloy

  • 9 - Electrical connection : M20 female, two electrical connections with a blind plug

  • D - integral indicator : Digital indicator

  • N - Mounting bracket : None

  • D3 - Calibration units : bar calibration (bar unit)

  • N4 - Wired tag plate : 316 SST tag plate wired onto transmitter

  • T06 - Pressure test/Leak test certificate : Test Pressure: 2 MPa (290 psi)

  • Shipping weight : 10 Kg
RM3,974.40
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA530E-JBS7N-024DN/D4

  • Product type : EJA530E Gauge Pressure Transmitter

  • EJA530E : Gauge Pressure Tansmitter

  • J - Output signal : 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

  • B - Measurement span (capsule) : 0.1 to 2 MPa (14.5 to 290 psi)

  • S - Wetted parts material 

  • Process connector : 316L SST

  • Diaphragm : Hastelloy C-276

  • Others : 316L SST

  • 7 - Process connection : 1/2 NPT male

  • N - Always N

  • 0 - Always 0

  • 2 - Amplifier housing : ASTM CF-8M stainless stee

  • 4 - Electrical connection : M20 female, two electrical connections without blind plugs

  • D - integral indicator : Digital indicator

  • N - Mounting bracket : None

  • D4 - Calibration units : M calibration (kgf/cm2 unit)

  • Weight : 1.2 + 1.5 Kg

  • Shipping weight : 4 Kg
RM3,735.20
  • Estimated Lead Time : 4 - 6 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA530E-JBS8N-019EL/D3

  • Product type : EJA530E Gauge Pressure Transmitter

  • EJA530E : Gauge Pressure Tansmitter

  • J - Output signal : 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

  • B - Measurement span (capsule) : 0.1 to 2 MPa (14.5 to 290 psi)

  • S - Wetted parts material 

  • Process connector : 316L SST

  • Diaphragm : Hastelloy C-276

  • Others : 316L SST

  • 8 - Process connection : G1/2 DIN 16 288 male

  • N - Always N

  • 0 - Always 0

  • 1 - Amplifier housing : Cast aluminum alloy

  • 9 - Electrical connection : M20 female, two electrical connections with a blind plug

  • E - integral indicator : Digital indicator with the range setting switch (push button)

  • L - Mounting bracket : 316 SST 2-inch pipe mounting

  • D3 - Calibration units : bar calibration (bar unit)

  • Weight : 1.2 Kg

  • Shipping weight : 2.5 Kg
RM5,387.90
  • Estimated Lead Time : 4 - 5 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA530E-JCH4N-012DL/NF2

  • Product Type : Gauge pressure transmitter

  • Output signal : J = 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : C = 0.5 to 10 MPa (72.5 to 1450 psi)

  • Wetted parts material : H

    • Process connector : Hastelloy C-276

    • Diaphragm : Hastelloy C-276

    • Others : Hastelloy C-276

  • Process connections : 4 = 1/2 NPT female

  • N : Always N

  • 0 : Always 0

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

  • Integral indicator : D = Digital indicator

  • Mounting bracket : L = 316 SST 2-inch pipe mounting

  • NF2

  • Shipping Weight : 8 Kg

RM3,311.00
  • Condition : Brand New
  • Warranty : 1 Years
  • Product Number : EJA530E-JCS4N-012DL
  • Manufacturer : Yokogawa
RM4,533.76
  • Estimated Lead Time : 4 - 6 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA530E-JCS4N-012EL/KU22/D3/M15
  • Product type : EJA530E Gauge Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)
  • Measurement span (capsule) : C = 0.5 to 10 MPa (72.5 to 1450 psi)
  • Wetted parts material : S = Process connector 316L SST #, Diaphragm Hastelloy C-276 *3#, Others 316L SST #
  • Process connections : 4 = 1/2 NPT female
  • N = Always N
  • 0 = Always 0
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
  • Integral indicator : E = Digital indicator with the range setting switch (push button)
  • Mounting bracket : L = 316 SST 2-inch pipe mounting
  • ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic
  • Calibration units : D3 = bar calibration (bar unit)
  • Material certificate : M15 = Process Connector
  • Shipping weight : 3Kg
RM3,707.60
  • Estimated Lead Time : 4 - 8 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA530E-JCS4N-014DL/KU22/D3/X2/T06/N4/M15
  • Product type : EJA530E Gauge Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)
  • Measurement span (capsule) : C = 0.5 to 10 MPa (72.5 to 1450 psi)
  • Wetted parts material : S = Process connector 316L SST #, Diaphragm Hastelloy C-276 *3#, Others 316L SST #
  • Process connections : 4 = 1/2 NPT female
  • N = Always N
  • 0 = Always 0
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 4 = M20 female, two electrical connections without blind plugs
  • Integral indicator : D = Digital indicator
  • Mounting bracket : L = 316 SST 2-inch pipe mounting
  • ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic
  • Calibration units : D3 = bar calibration (bar unit)
  • Painting Coating change : X2 = Anti-corrosion coating
  • Pressure test/ Leak test certificate : T06 = Test Pressure: 2 MPa (290 psi), Nitrogen(N2) Gas or Water Retention time: one minute
  • Wired tag plate : N4 = 316 SST tag plate wired onto transmitter
  • Material certificate : M15 = Process Connector
  • Weight : 1.2 Kg
  • Shipping weight : 3Kg
RM8,077.60
  • Estimated Lead Time : 4 - 6 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA530E-JCS4N-019DL/KU22
  • Product type : Gauge Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC Output with digital communication
  • Measurement span (capsule) : C = 0.5 to 10 MPa (72.5 to 1450 psi)
  • Wetted parts material *2 : S = Process connector 316L SST #, Diaphragm Hastelloy C-276 *3#, Others 316L SST #
  • Process connections : 4 = 1/2 NPT female
  • Always N
  • Always 0
  • Amplifier housing : 1 = Cast aluminum alloy
  • Electrical connection : 9 = M20 female, two electrical connections with a blind plug*7
  • Integral indicator : D = Digital indicator *8
  • Mounting bracket : L = 316 SST 2-inch pipe mounting
  • Shipping weight : 3Kg
RM3,551.20
  • Estimated Lead Time : 8 - 10 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA530E-JCS4N-022DL/KU22/M15/T07
  • Product type : EJA530E Gauge Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)
  • Measurement span (capsule) : C = 0.5 to 10 MPa (72.5 to 1450 psi)
  • Wetted parts material : S = Process connector 316L SST #, Diaphragm Hastelloy C-276 *3#, Others 316L SST #
  • Process connections : 4 = 1/2 NPT female
  • N = Always N
  • 0 = Always 0
  • Amplifier housing : 2 = ASTM CF-8M stainless steel
  • Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
  • Integral indicator : D = Digital indicator
  • Mounting bracket : L = 316 SST 2-inch pipe mounting
  • ATEX : KU22 = Combined KF22, KS21 and ATEX Intrinsically safe Ex ic
  • Material certificate : M15 = Process Connector
  • Pressure test/ Leak test certificate : T07 = Test Pressure: 10 MPa (1450 psi), Nitrogen(N2) Gas or Water, Retention time: one minute
  • Weight : 2.7 Kg
  • Shipping weight : 4 Kg
RM4,977.20
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA530E-JCS7N-017EN/CS1/N4

  • Product Type : Gauge pressure transmitter

  • Output signal : J = 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

  • Measurement span (capsule) : C = 0.5 to 10 MPa (72.5 to 1450 psi)

  • Wetted parts material : S

    • Process connector : 316L SST

    • Diaphragm : Hastelloy C-276

    • Others : 316L SST

  • Process connections : 7 = 1/2 NPT male

  • N : Always N

  • 0 : Always 0

  • Amplifier housing : 1 = Cast aluminum alloy

  • Electrical connection : 7 = 1/2 NPT female, two electrical connections with a blind plug

  • Integral indicator : E = Digital indicator with the range setting switch (push button)

  • Mounting bracket : N = None

  • Canadian Standards Association (CSA) : CSI = CSA Intrinsically safe Approval

    • Certificate: 1606623
      [For CSA C22.2]
      Applicable Standard: C22.2 No.0, C22.2 No.0.4, C22.2 No.25, C22.2 No.94, C22.2 No.157,
      C22.2 No.213, C22.2 No.61010-1, C22.2 No.60079-0, C22.2 No.61010-2-030
      Intrinsically Safe for Class I, Division 1, Groups A, B, C & D, Class II, Division 1, Groups E, F & G,
      Class III, Division 1, Nonincendive for Class I, Division 2, Groups A, B, C & D, Class II, Division 2,
      Groups F & G, Class III, Division 1
      Enclosure: Type 4X, Temp. Code: T4 Amb. Temp.: ?50 to 60?C(?58 to 140?F) *2
      Electrical Parameters: [Intrinsically Safe] Vmax=30V, Imax=200mA, Pmax=0.9W, Ci=10nF, Li=0

RM3,080.00
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA530E-JCS7N-019DL/D3/N4/T06

  • Product type : Gauge Pressure Tansmitter

  • EJA530E : Gauge Pressure Tansmitter

  • J - Output signal : 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

  • C - Measurement span (capsule) : 0.5 to 10 MPa (72.5 to 1450 psi)

  • S - Wetted parts material 

  • Process connector : 316L SST

  • Diaphragm : Hastelloy C-276

  • Others : 316L SST

  • 7 - Process connection : 1/2 NPT male

  • N - Alaways N

  • 0 - Always 0

  • 1 - Amplifier housing : Cast aluminum alloy

  • 9 - Electrical connection : M20 female, two electrical connections with a blind plug

  • D - integral indicator : Digital indicator

  • L - Mounting bracket : 316 SST 2-inch pipe mounting

  • D3 - Calibration units : bar calibration (bar unit)

  • N4 - Wired tag plate : 316 SST tag plate wired onto transmitter

  • T06 - Pressure test/Leak test certificate : Test Pressure: 2 MPa (290 psi)

  • Shipping weight : 10 Kg

RM4,158.40
  • Estimated Lead Time : 8 - 10 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA530E-JCS7N-024DL/KS21
  • Product type : In-Line Mount Gauge Pressure Transmitter
  • Output signal : J = 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)
  • Measurement span (capsule) : C = 0.5 to 10 MPa (72.5 to 1450 psi)
  • Wetted parts material : S = Process connector 316L SST # , Diaphragm Hastelloy C-276 *3# ,
  • Others 316L SST #
  • Process connections : 7 = 1/2 NPT male
  • N = Always N
  • 0 = Always 0
  • Amplifier housing : 2 = ASTM CF-8M stainless steel
  • Electrical connection : 4 = M20 female, two electrical connections without blind plugs
  • Integral indicator : D = Digital indicator
  • Mounting bracket : L = 316 SST 2-inch pipe mounting
  • Shipping Weight : 5Kg
RM5,451.00
  • Condition : Brand New
  • Warranty : 1 Years
  • Product Number : EJA530E-JDS4N-012DL/NF11/HAC/A/N4/M15
  • Manufacturer : Yokogawa
RM5,899.00
  • Estimated Lead Time : 8 - 10 weeks.

  • Manufacturer : Yokogawa

  • Product No. : EJA530E-JDS4N-017DL/D3/A/T07/M15/HAC

  • Product type : EJA530E Gauge Pressure Tansmitter

  • EJA530E : Gauge Pressure Tansmitter

  • J - Output signal : 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

  • D - Measurement span (capsule) : 5 to 50 MPa (720 to 7200 psi)

  • S - Wetted parts material 

  • Process connector : 316L SST

  • Diaphragm : Hastelloy C-276

  • Others : 316L SST

  • 4 - Process connection : 1/2 NPT female

  • N - Always N

  • 0 - Always 0

  • 1 - Amplifier housing : Cast aluminum alloy

  • 7 - Electrical connection : 1/2 NPT female, two electrical connections with a blind plug

  • D - integral indicator : Digital indicator

  • L - Mounting bracket : 316 SST 2-inch pipe mounting

  • D3 - Calibration units : bar calibration (bar unit)

  • A - Lightning protector : Transmitter power supply voltage: 10.5 to 32 V DC ( 10.5 to 30 V DC for intrinsically safe type, 9 to 32 V DC for Fieldbus communication type.) Allowable current: Max. 6000 A ( 1?40

RM4,379.20
  • Condition : Brand New
  • Warranty : 1 Years
  • Product Number : EJA530E-JDS4N-017DL/D3/C1/A
  • Manufacturer : Yokogawa
RM3,142.00
  • Estimated Lead Time : 2 - 4 weeks.
  • Manufacturer : Yokogawa
  • Product No. : EJA530E-JDS4N-024DN
  • Product type : Absolute and Gauge Pressure Transmitter
  • Power consumption : 0.96 mA to 3 mA, 27 mW
  • Power supply : 9 to 28 V DC for general use and flame proof type.
  • Self Diagnostics : CPU failure, hardware failure, configuration error, process alrm for pressure or capsule temperature. User-configurable process high/low alrm for pressure is also available
  • Ambient Humidity Limits : 0 to 100% RH
  • Ambient temperature limits : -40 to 85 ?C
  • Process temperature limits: -40 to 120 ?C
  • Shipping weight : 2.5 Kg
RM3,914.60