Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJA310A-FAS4B-X2DD

Product Type : Absolute Pressure Transmitters

Output Signal : F = Digital communication (FOUNDATION Fieldbus protocol,

Measurement span (capsule) : A = 0.03 to 3 MPa {0.3 to 30 kgf/cm2}

Wetted parts material : S

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts materia : B

X

Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plug

Integral indicator : D = Digital indicator

Mounting bracket : D = SUS304 or SCS13A, 2-inch pipe mounting (L type)

Weight : 3.9 Kg

Shipping Weight : 5 Kg

Estimated Lead Time : 2 - 4 Weeks

Manufacturer : Yokogawa

Product No : EJA430A-DBS4B-37DC/FF1/X1/D3/C1/T02

Product Type : EJA430A Gauge Pressure Transmitter

Output Signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)

Measurement span(capsule) : B = 0.14 to 14 MPa {1.4 to 140 kgf/cm2} {20 to 2000 psi} {1.4 to 140 bar}

Wetted parts material : S = SCS14A body, SUS316L capsule, SUS316 vent plug.

Process connection : 4 = with 1/2 NPT female process connector

Bolts and nuts material : B = SUS630 , 3 MPa {30 kgf/cm2} A capsule, 14 MPa {140 kgf/cm2} B capsule

Installation : 3 = Vertical impulse piping type, right side high pressure, process connector downside

Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug

Integral indicator : D = Digital indicator

Mounting bracket : C = SECC Carbon steel , 2-inch pipe mounting (L type)

Factory Mutual (FM) : FF1 = FM Explosionproof Approval *1 *3 *4 Applicable standard: FM3600, FM3615, FM3810, ANSI/NEMA250 Explosionproof for Class I, Division 1, Groups B, C and D Dust-ignitionproof for Class II/III, Division 1, Groups E, F and G Hazardous (classified) locations, indoors and outdoors (NEMA 4X) Temperature class: T6 Amb. Temp.: ?40 to 60C (?40 to 140F)

Painting : X1 = Coating change - Epoxy resin-baked coating

Calibration units : D3 = bar calibration (bar unit)

Failure alarm down-scale : C1 = Output status at CPU failure and hardware error is ?5%, 3.2 mA or less

Pressure test/Leak test Certificate : T02 = Test Pressure: 14 MPa{140 kgf/cm2 Retention time: 10 minutes }, Nitrogen (N2) Gas , Retention time: 10 minutes

Shipping Weight : 8 Kg

Estimated Lead Time : 4 - 6 Weeks

Manufacturer : Yokogawa

Model : EJA430A

Zero-based calibrated span

Linear output

Wetted parts material code ‘S’

Silicone oil

Stability : 0.1 % of URL per 60 months

Operating voltage : 20 ... 300 V DC / 20 ... 253 V AC

Power Supply Effects : 0.005 % per Volt (from 21.6 to 32 V DC, 350 )

External Zero Adjustment : External zero is continuously adjustable with 0.01 % incremental resolution of span. Span may be adjusted locally using the digital indicator with range switch.

Mounting Position Effect : Rotation in diaphragm plane has no effect. Tilting up to 90 will cause zero shift up to 0.4 kPa {1.6 inH2 O} which can be corrected by the zero adjustment.

Supply Voltage : 10.5 to 42 V DC for general use and flameproof type.10.5 to 32 V DC for lightning protector (Optional code /A). 10.5 to 30 V DC for intrinsically safe, Type n, nonincendive, or non-sparking type. Minimum voltage limited at 16.4 V DC for digital communications, BRAIN and HART.

Ambient Humidity Limits : 5 to 100 % RH @ 40 C (104 F)

Process Temperature Limits : -40 to 120 C (-40 to 248 F)

Dimensions (HxWxD), approx : 12.5 cm X 11 cm X 19.7 cm

Weight : 3.9 kg (8.6 lbs.) without integral indicator, mounting bracket, and process connector.

Shipping Weight : 8 Kg

Estimated Lead Time : 2 - 4 Weeks

Manufacturer : Yokogawa

Product No : EJA430A-EBS4A-22DC/Z

Product Type : EJA430A Gauge Pressure Transmitter

Output Signal : E = 4 to 20 mA DC with digital communication (HART protocol, refer to GS 01C22T01-00E)

Measurement span(capsule) : B = 0.14 to 14 MPa {1.4 to 140 kgf/cm2} {20 to 2000 psi} {1.4 to 140 bar}

Wetted parts material : S = SCS14A body, SUS316L capsule, SUS316 vent plug.

Process connection : 4 = with 1/2 NPT female process connector

Bolts and nuts material : A = SCM435, 3 MPa {30 kgf/cm2} A capsule, 14 MPa {140 kgf/cm2} B capsule

Installation : 2 = Vertical impulse piping type, right side high pressure, process connector upside

Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plug

Integral indicator : D = Digital indicator

Mounting bracket : C = SECC Carbon steel , 2-inch pipe mounting (L type)

Weight : 3.9 kg (8.6 lbs.) without integral indicator, mounting bracket, and process connector.

Shipping Weight : 6 Kg

Estimated Lead Time : In stock. Usually ships in 7-10 working days

Manufacturer : Yokogawa

Model : EJA430A

Zero-based calibrated span

Linear output

Wetted parts material code ‘S’

Silicone oil

Stability : 0.1 % of URL per 60 months

Operating voltage : 20 ... 300 V DC / 20 ... 253 V AC

Power Supply Effects : 0.005 % per Volt (from 21.6 to 32 V DC, 350 )

External Zero Adjustment : External zero is continuously adjustable with 0.01 % incremental resolution of span. Span may be adjusted locally using the digital indicator with range switch.

Mounting Position Effect : Rotation in diaphragm plane has no effect. Tilting up to 90 will cause zero shift up to 0.4 kPa {1.6 inH2 O} which can be corrected by the zero adjustment.

Supply Voltage : 10.5 to 42 V DC for general use and flameproof type.10.5 to 32 V DC for lightning protector (Optional code /A). 10.5 to 30 V DC for intrinsically safe, Type n, nonincendive, or non-sparking type. Minimum voltage limited at 16.4 V DC for digital communications, BRAIN and HART.

Ambient Humidity Limits : 5 to 100 % RH @ 40 C (104 F)

Process Temperature Limits : -40 to 120 C (-40 to 248 F)

Dimensions (HxWxD), approx : 12.5 cm X 11 cm X 19.7 cm

Weight : 3.9 kg (8.6 lbs.) without integral indicator, mounting bracket, and process connector.

Shipping Weight : 8 Kg

Estimated Lead Time : 2 - 4 weeks.

Manufacturer : Yokogawa

Product No. : EJA430E-DAS4G-31ED/FF1/D3/S2/C1/T01

Product type : Gauge Pressure Transmitter

EJA430E : Gauge pressure transmitter

D - Output signal : 4 to 20 mA DC with digital communication (BRAIN protocol)

A - Measurement span (capsule) : 0.03 to 3.5 MPa (4.3 to 500 psi)

S - Wetted parts material

Cover flange and process connector : ASTM CF-8M

Capsule : Hastelloy C-276 (Diaphragm) F316L SST, 316L SST (Others)

Capsule gasket : Teflon-coated 316L SST 

Vent/Drain plug : 316 SST

4 - Process connections : with 1/2 NPT female process connector

G - Bolts and nuts material : 316L SST

3 - installation : Vertical piping, right side high pressure, and process connection down side

1 - Amplifier housing : Cast aluminum alloy

E - Integral indicator : Digital indicator with the range setting switch (push button)

D - Mounting Bracket : 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)

FF1 - Factory Mutual (FM) : FM Explosionproof Approval *1 Applicable Standard: FM3600, FM3615, FM3810, ANSI/NEMA 250 Explosionproof for Class I, Division 1, Groups B, C and D, Dust-ignitionproof for Class II/III, Division 1, Groups E, F and G, in Hazardous locations, indoors and outdoors (Enclosure: Type 4X) ?FACTORY SEALED, CONDUIT SEAL NOT REQUIRED.? Temperature class: T6, Amb. Temp.: ?40 to 60?C (?40 to 140?F)

D3 - Calibration units : bar calibration (bar unit)

S2

C1 - Output limits and failure operation : Failure alarm down-scale : Output status at CPU failure and hardware error is -5%, 3.2mA DC or less for 4 to 20 mA output type, and -5%, 0.8V DC or less for 1 to 5 V output type.

T01 - Pressure test/ Leak test certificate : Test Pressure: 3.5 MPa (500 psi)

Shipping weight : 8 Kg

Condition : Brand New

Warranty : 1 Year

Part Number : EJA430E-DAS4J-719DD/D3

Manufacturer : Yokogawa

Estimated Lead Time : 8 - 10 weeks.

Manufacturer : Yokogawa

Product No. : EJA430E-DAS4J-912EB/D4

Product type : Gauge Pressure Transmitter

EJA430E : Gauge pressure transmitter

D - Output signal : 4 to 20 mA DC with digital communication (BRAIN protocol)

A - Measurement span (capsule) : 0.03 to 3.5 MPa (4.3 to 500 psi)

S - Wetted parts material

Cover flange and process connector : ASTM CF-8M

Capsule : Hastelloy C-276 (Diaphragm) F316L SST, 316L SST (Others)

Capsule gasket : Teflon-coated 316L SST 

Vent/Drain plug : 316 SST

4 - Process connections : with 1/2 NPT female process connector

J - Bolts and nuts material : B7 carbon steel

9 - installation : Horizontal piping and left side high pressure

1 - Amplifier housing : Cast aluminum alloy

2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

E - Integral indicator : Digital indicator with the range setting switch (push button)

B - Mounting Bracket : 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

Calibration unit : D4 = M calibration (kgf/cm2 unit)

Weight : 2.8 Kg

Shipping weight : 8 Kg

Condition : Brand New

Warranty : 1 Year

Part Number : EJA430E-DAS4J-912NB/D1

Manufacturer : Yokogawa

Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJA430E-DBS4G-717DD/D3

Product Type : Gauge Pressure Transmitter

Output signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)

Measurement span (capsule) : B = 0.14 to 16 MPa (20 to 2300 psi)

Wetted parts material : S

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts material : G = 316L SST

Installation : 7 = Vertical piping, left side high pressure, and process connection down side

Amplifier housing : 1 = Cast aluminum alloy

Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug

Integral indicator : D = Digital indicator

Mounting bracket : D = 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)

Calibration units : D3 = Bar calibration (bar unit)

Weight : 2.8 Kg

Shipping Weight : 4 Kg

Estimated Lead Time : 2 - 4 weeks.

Manufacturer : Yokogawa

Product No. : EJA430E-DHS5G-912DJ

Product type : Gauge Pressure Transmitter

EJA430E : Gauge pressure transmitter

D - Output signal : 4 to 20 mA DC with digital communication (BRAIN protocol)

H - Measurement span (capsule) : 5 to 500 kPa (20 to 2000 inH2O)

S - Wetted parts material

Cover flange and process connector : ASTM CF-8M

Capsule : Hastelloy C-276 (Diaphragm) F316L SST, 316L SST (Others)

Capsule gasket : Teflon-coated 316L SST 

Vent/Drain plug : 316 SST

5 - Process connections : without process connector (1/4 NPT female on the cover flanges)

G - Bolts and nuts material : 316L SST

9 - installation : Horizontal piping and left side high pressure

1 - Amplifier housing : Cast aluminum alloy

2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

D - Integral indicator : Digital indicator 

J - Mounting Bracket : 316 SST 2-inch pipe mounting, flat type (for horizontal piping)

Weight : 2.8 Kg

Shipping weight : 4 Kg

Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJA430E-JAH5J-929DB/FS1/D3

Product type : EJA430E Gauge Pressure Transmitter

Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

Measurement span (capsule) : A = 0.03 to 3.5 MPa (4.3 to 500 psi)

Wetted parts material : H = ASTM CF-8M Cover flange and process connector, Hastelloy C-276 Capsule, PTFE Teflon Capsule gasket , 316 SST Vent/Drain plug.

Process connections : 5 = without process connector (1/4 NPT female on the cover flanges)

Bolts and nuts material : J = B7 carbon steel

Installation : 9 = Horizontal piping and left side high pressure

Amplifier housing : 2 = ASTM CF-8M stainless steel

Electrical connection : 9 = M20 female, two electrical connections and a blind plug

Integral indicator : D = Digital indicator

Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

Factory Mutual (FM) : FS1 = FM Intrinsically safe Approval

Calibration units. : D3 = bar calibration (bar unit)

Shipping Weight : 6 Kg

Estimated Lead Time : 2 - 4 weeks.

Manufacturer : Yokogawa

Product No. :  EJA430E-JAS4G-712EK

Product type : Gauge pressure transmitter

EJA430E : Gauge pressure transmitter 

J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

A - Measurement span (capsule) : 0.03 to 3.5 MPa (4.3 to 500 psi)

S - Wetted Parts Materials

Cover flange and process connector : ASTM CF-8M

Capsule : Hastelloy C-276 *2 (Diaphragm)

F316L SST, 316L SST (Others)

Capsule gasket : Teflon-co

Vent/Drain plug : 316 SST4 - Process connections See the table in the next page for the codes for a diaphragm seal system : with 1/2 NPT

female process connectorated 316L SST

G - Bolt and nuts material : 316L SST

7 - Installation : Vertical piping, left side high pressure, and process connection down side

1 - Amplifier housing : Cast aluminum alloy

2 - Electrical Connection : 1/2 NPT female, two electrical connections without blind plugs

E - Integral indicator : Digital indicator with the range setting switch (push button) 

K - 316 SST or SCS14A 2-inch pipe mounting, L type (for vertical piping)

Weight : 2.8 Kg 

Shipping weight : 3.5 Kg

Estimated Lead Time : 4 - 8 weeks.

Manufacturer : Yokogawa

Product No. :

Estimated Lead Time : 2 - 4 weeks.

Manufacturer : Yokogawa

Product No. :  EJA430E-JAS4G-912DJ

Product type : Gauge Pressure Transmitter

EJA430E : Gauge pressure transmitter

J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

A - Measurement span (capsule) : 0.03 to 3.5 MPa (4.3 to 500 psi)

S - Wetted parts material

Cover flange and process connector : ASTM CF-8M

Capsule : Hastelloy C-276 (Diaphragm) F316L SST, 316L SST (Others)

Capsule gasket : Teflon-coated 316L SST 

Vent/Drain plug : 316 SST

4 - Process connections : with 1/2 NPT female process connector

G - Bolts and nuts material : 316L SST

9 - installation : Horizontal piping and left side high pressure

1 - Amplifier housing : Cast aluminum alloy

2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

D - Integral indicator : Digital indicator 

J - Mounting Bracket : 316 SST 2-inch pipe mounting, flat type (for horizontal piping)

Weight : 2.8 Kg

Shipping weight : 4 Kg

Condition : Brand New

Warranty : 1 Year

Part Number : EJA430E-JAS4G-912EB/KS21/X2/A

Manufacturer : Yokogawa

Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJA430E-JAS4G-917DB/X2/A/D3/M11

Product Type : Gauge Pressure Transmitter

Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

Measurement span (capsule) : A = 0.03 to 3.5 MPa (4.3 to 500 psi)

Wetted parts material : S =

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts materia : G = 316L SST

Installation : 9 = Horizontal piping and left side high pressure

Amplifier housing : 1 = Cast aluminum alloy

Electrical connection : 7 = 1/2 NPT female, two electrical connections and a blind plug

Integral indicator : D : Digital indicator

Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

Painting, Coating change : X2 = Anti-corrosion coating

Lightning protector : A = Transmitter power supply voltage: 10.5 to 32 V DC ( 10.5 to 30 V DC for intrinsically safe type, 9 to 32 V DC for Fieldbus communication type.) Allowable current: Max. 6000 A ( 1?40

Estimated Lead Time : 8 - 10 weeks.

Manufacturer : Yokogawa

Product No. : EJA430E-JAS5J-912EB

Product type : Gauge Pressure Transmitter

EJA430E - Gauge pressure transmitter

J - Output Signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

A - Measurement span (capsule) : 0.03 to 3.5 MPa (4.3 to 500 psi)

S - Wetted parts material

Cover flange and process connector : ASTM CF-8M

Capsule : Hastelloy C-276 (Diaphragm) F316L SST, 316L SST (Others)

Capsule gasket : Teflon-coated 316L SST

Vent/drain plug : 316 SST

5 - Process connections See the table in the next page for the codes for a diaphragm seal system : without process connector (1/4 NPT female on the cover flanges)

J - Bolts and nuts material : B7 carbon steel

9 - Installation : Horizontal piping and left side high pressure

1 - Amplifier housing : Cast aluminum alloy

2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

E - Integral indicator : Digital indicator with the range setting switch (push button)

B - Mounting bracket : 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

Shipping weight : 5 Kg

Estimated Lead Time : 6 - 8 weeks.

Manufacturer : Yokogawa

Product No. : EJA430E-JBS4G-312DC/KU22/D4

Product type : EJA430E Gauge Pressure Transmitter

EJA430E : Gauge pressure transmitter

J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

B - Measurement span (capsule) : 0.14 to 16 MPa (20 to 2300 psi)

S - Wetted parts material

Cover flange and process connector : ASTM CF-8M

Capsule : Hastelloy C-276 (Diaphragm) F316L SST, 316L SST (Others)

Capsule gasket : Teflon-coated 316L SST 

Vent/Drain plug : 316 SST

4 - Process connections : with 1/2 NPT female process connector

3 - installation : Vertical piping, right side high pressure, and process connection down side

1 - Amplifier housing : Cast aluminum alloy

2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

D - Integral indicator : Digital indicator

C- Mounting Bracket

KU22 - ATEX : Combined KF22, KS21 and ATEX Intrinsically safe Ex ic *1*3 [ATEX Intrinsically safe Ex ic] Applicable Standard: EN 60079-0:2012, EN 60079-11:2012 II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?30 to 60?C (?22 to 140?F) *2 Ui=30 V, Ci=27.6 nF, Li=0

Estimated Lead Time : 8 - 10 weeks.

Manufacturer : Yokogawa

Product No. : EJA430E-JBS4G-312ND/KU22

Product type : EJA430E Gauge Pressure Transmitter

EJA430E : Gauge pressure transmitter

J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

B - Measurement span (capsule) : 0.14 to 16 MPa (20 to 2300 psi)

S - Wetted parts material

Cover flange and process connector : ASTM CF-8M

Capsule : Hastelloy C-276 (Diaphragm) F316L SST, 316L SST (Others)

Capsule gasket : Teflon-coated 316L SST 

Vent/Drain plug : 316 SST

4 - Process connections : with 1/2 NPT female process connector

3 - installation : Vertical piping, right side high pressure, and process connection down side

1 - Amplifier housing : Cast aluminum alloy

2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

N - Integral indicator : None

D- Mounting Bracket : 304 SST or SCS13A 2-inch pipe mounting, L type (for vertical piping)

KU22 - ATEX : Combined KF22, KS21 and ATEX Intrinsically safe Ex ic *1*3 [ATEX Intrinsically safe Ex ic] Applicable Standard: EN 60079-0:2012, EN 60079-11:2012 II 3G Ex ic IIC T4 Gc, Amb. Temp.: ?30 to 60?C (?22 to 140?F) *2 Ui=30 V, Ci=27.6 nF, Li=0

Estimated Lead Time : 8 - 10 weeks.

Manufacturer : Yokogawa

Product No. : EJA430E-JBS4G-912EB/KF22/A/D1/M11/T12

Product Type : Gauge pressure transmitter

Output signal : J = 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

Measurement span (capsule) : B = 0.14 to 16 MPa (20 to 2300 psi)

Wetted parts material : S

Process connections : 4 = with 1/2 NPT female process connector

Bolts and nuts material : G = 316L SST

Installation : 9 = Horizontal piping and left side high pressure

Amplifier housing : 1 = Cast aluminum alloy

Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs

Integral indicator : E = Digital indicator with the range setting switch (push button)

Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

ATEX : KF22 = ATEX Flameproof Approval
Applicable Standard: EN 60079-0:2012/A11:2013, EN 60079-1:2007, EN 60079-31:2009
Certificate: KEMA 07ATEX0109 X
II 2G, 2D Ex d IIC T6...T4 Gb, Ex tb IIIC T85?C Db
Degree of protection: IP66/IP67
Amb. Temp. (Tamb) for gas-proof :
T4; ?50 to 75?C (?58 to 167?F), T5; ?50 to 80?C (?58 to 176?F), T6; ?50 to 75?C (?58 to 167?F)
Process Temp. for gas-proof (Tp):
T4; ?50 to 120?C (?58 to 248?F), T5; ?50 to 100?C (?58 to 212?F), T6; ?50 to 85?C (?58 to 185?F)
Max. surface Temp. for dust-proof: T85?C (Tamb: ?30 to 75?C, Tp: ?30 to 85?C)

Lightning protector : A = Transmitter power supply voltage: 10.5 to 32 V DC ( 10.5 to 30 V DC for intrinsically safe type, 9 to 32 V DC for Fieldbus communication type.) Allowable current: Max. 6000 A ( 1?40

Condition : Brand New

Warranty : 1 Years

Product Number : EJA438E-DASCG-917DB-WA12B2SW00-AA27/KU22/D3/HE

Manufacturer :Yokogawa

Estimated Lead Time : 8 - 10 weeks.

Manufacturer : EJA438E Diaphragm Sealed Gauge Pressure Transmitter

Product No. : EJA438E-DASCJ-912DB-WJ12A2SW00-CA23

Product type : Yokogawa

EJA438E : Diaphragm sealed gauge pressure transmitter

D - 4 to 20 mA DC with digital communication (BRAIN protocol)

A - Measurement span (capsule) : 0.06 to 3.5 MPa (8.6 to 500 psi)

S : Always S

C : Always C

J - Coverflange bolts and nuts material : B7 carbon steel

9 - Installation : Horizontal piping type and left side high pressure

1 - Amplifier housing : Cast aluminum alloy

2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

D - Integral indicator : Digital indicator

Estimated Lead Time : 8 - 10 weeks.

Manufacturer : Yokogawa

Product No. : EJA438E-JASCC-912NN-ED43C2SE00-BB22/D4

Product type : EJA438E Diaphragm sealed gauge pressure transmitter

EJA438E : Diaphragm sealed gauge pressure transmitter

J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

A - Measurement span (capsule) : 0.06 to 3.5 MPa (8.6 to 500 psi)

S : Always S

C : Always C

C - Coverflange bolts and nuts material : 660 SST

9 - Installation : Horizontal piping type and left side high pressure

1 - Amplifier housing : Cast aluminum alloy

2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

N - Integral indicator : None

N - Mounting bracket : None

E - Process connection style : Extended type

D4 - Flange rating : DIN PN25/40 

3 - Process connection size (Process flange size) : 3-inch (80 mm)

C - Flange material : 316 SST

2 - Gasket Contact surface : Flat (no serration)

SE - Wetted parts material : 316L SST(Diaphragm), 316 SST (pipe), 316 SST (others)

0 - Flushing connection ring : None

0 - Extension : none

B - Fill Fluid : For general use (silicone oil)

process temperature : ?30 to 180?C

Ambient temperature : ?15 to 60?C

B - Capillary connection : Back of diaphragm seal unit

2 : Always 2

2 : Capillary length : 2 m

D4 - Calibration units : M calibration (kgf/cm2 unit)

Weight : 12.2 Kg

Shipping weight : 13.5 Kg

Estimated Lead Time : 2 - 4 weeks.

Manufacturer : Yokogawa

Product No. : EJA438E-JASCG-912DJ-WD42C2SWB0-AA2A/KF22

Product type : EJA438E Diaphragm sealed gauge pressure transmitter

EJA438E : Diaphragm sealed gauge pressure transmitter

J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

A - Measurement span (capsule) : 0.06 to 3.5 MPa (8.6 to 500 psi)

S : Always S

C : Always C

G - Coverflange bolts and nuts material : 316L SST

9 - Installation : Horizontal piping type and left side high pressure

1 - Amplifier housing : Cast aluminum alloy

2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

D - Integral indicator : Digital indicator 

J - Mounting bracket : 316 SST 2-inch pipe mounting, flat type (for horizontal piping)

W - Process connection style : Flush type

D4 - Flange rating : DIN PN25/40 

2 - Process connection size (Process flange size) : 2-inch(50mm)

C - Flange material : 316 SST

2 - Gasket Contact surface : Flat (no serration)

SW - Wetted parts material : 316L SST(Diaphragm) 316L SST (others)

B - Flushing connection ring : Straight type (ring) 1/4 NPT connections (vent/drain plugs) 316 SST (material)

0 - extension : none

A - Fill Fluid : For general use (silicone oil)

process temperature : ?10 to 250?C 

Ambient temperature : ?10 to 60?C

A - Capillary connection : Side of diaphragm seal unit

2 : Always 2

A : Capillary length : 10 m

KF22 - ATEX : ATEX Flameproof Approval

Weight : 9.8 Kg

Shipping weight : 11 Kg

Estimated Lead Time : 8 - 10 weeks.

Manufacturer : Yokogawa

Product No. : EJA438E-JASCG-919DB-WD23B2SW00-BA23

Product type : EJA438E Diaphragm sealed gauge pressure transmitter

EJA438E : Diaphragm sealed gauge pressure transmitter

J - Output signal : 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)

A - Measurement span (capsule) : 0.06 to 3.5 MPa (8.6 to 500 psi)

S : Always S

C : Always C

G - Coverflange bolts and nuts material : 316L SST

9 - Installation : Horizontal piping type and left side high pressure

1 - Amplifier housing : Cast aluminum alloy

9 - Electrical connection : M20 female, two electrical connections with a blind plug

D - Integral indicator : Digital indicator 

B - Mounting bracket : 304 SST 2-inch pipe mounting, flat type (for horizontal piping)

W - Process connection style : Flush type

D2 - Flange rating : DIN PN10/16

3 - Process connection size (Process flange size) : 3-inch (80 mm)

B - Flange material : 304 SST

2 - Gasket Contact surface : Flat (no serration)

SW - Wetted parts material : 316L SST(Diaphragm) 316L SST (others)

0 - Flushing connection ring : None

0 - extension : none

B - Fill Fluid : For general use (silicone oil)

Process temperature : ?30 to 180?C

Ambient temperature : ?15 to 60?C

A - Capillary connection : Side of diaphragm seal unit

2 : Always 2

3 : Capillary length : 3 m

Weight : 9.8 Kg

Shipping weight : 13 Kg

Condition : Brand New

Warranty : 1 Year

Part Number : EJA440E-DCS4J-719DD/KF22/D3

Manufacturer : Yokogawa

This product has been replaced with EJA530E-JBS7N-019DN/D3/N4/T06 Gauge Pressure Tansmitter

Manufacturer : Yokogawa

Product No. : EJA530A-EBS7N-07DF/HAC

Product type : EJA530A Gauge Pressure Transmitter

EJA530A : Gauge pressure transmitter

E - Output signal : 4 to 20 mA DC with digital communication (HART protocol, see IM 01C22T01-01E)

B - Measurement span (capsule) : 0.1 to 2 MPa {1 to 20 kgf/cm2}

S - Wetted parts material : SUS316L Hastelloy C-276 

7 - Process connection : 1/2 NPT male

N - Always N

0 - Always 0

7 - Electrical connection : 1/2 NPT female, two electrical connections and a blind plug

D - Integral indicator : Digital indicator

F - Mounting bracket : SUS304 2-inch pipe mounting

High Accuracy type : HAC = High Accuracy (Applicable for Model EJA530A)

Weight : 1.6 Kg

Shipping weight : 2.5 Kg

Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJA530A-EDS4N-02EF/KU2

Product type : Gauge pressure transmitter

EJA530A : Gauge pressure transmitter

E - Output signal : 4 to 20 mA DC with digital communication (HART protocol, see IM 01C22T01-01E)

D - Measurement span (capsule) : 5 to 50 MPa {50 to 500 kgf/cm2}

S - Wetted parts material : SUS316L Hastelloy C-276 

4 - Process connection : 1/2 NPT female

N - Always N

0 - Always 0

2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plug

E - Integral indicator : Digital indicator with the range setting switch

F - Mounting bracket : SUS304 2-inch pipe mounting

Shipping weight : 10 Kg

Condition : Brand New

Warranty : 1 Year

Part Number : EJA530A-EDS4N-04DF/KS2/E1/D3/M15/T08/HE

Manufacturer : Yokogawa

Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJA530A-FBS4N-09DF/M15/HAC/T06/D3/KS25/LC1/X1

Product type : Gauge pressure transmitter

EJA530A - Gauge pressure transmitter

F - Output signal : Digital communication(FOUNDATION Fieldbus protocol, refer to

GS 01C25T02-01EN)

B - Measurement span : 0.1 to 2 MPa {1 to 20 kgf/cm2}

S - Wetted parts material : Process connection SUS316L, Diaphragm Hastelloy C-276

4 - Process connections : 1/2 NPT female

N - Always N

0 - Always 0

9 - ELectrical connection : M20 female, two electrical connections and a blind plug

D - integral Indicator : Digital indicator

F - Mounting bracket : SUS304 2-inch pipe mounting

M15 - Mill Certificate : Process connector

HAC - High Accuracy type : High Accuracy (Applicable for Model EJA530A)

T06 - Pressure test/Leak test Certificate : Test Pressure: 2 MPa{20 kgf/cm2}

D3 - Calibration units : bar calibration (bar unit )

X1 - Painting Coating change : Epoxy resin-baked coating

Shipping weight : 10 Kg

Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJA530E-JAS7N-019EN/D3/N4/M15

Product type : EJA530E Gauge Pressure Transmitter

EJA530E : Gauge Pressure Tansmitter

J - Output signal : 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

A - Measurement span (capsule) : 10 to 200 kPa (1.45 to 29 psi)

S - Wetted parts material 

Process connector : 316L SST

Diaphragm : Hastelloy C-276

Others : 316L SST

7 - Process connection : 1/2 NPT male

N - Always N

0 - Always 0

1 - Amplifier housing : Cast aluminum alloy

9 - Electrical connection : M20 female, two electrical connections with a blind plug

E - integral indicator : Digital indicator with the range setting switch (push button)

N - Mounting bracket : None

D3 - Calibration units : bar calibration (bar unit)

N4 - Wired tag plate : 316 SST tag plate wired onto transmitter

M15 - Material certificate : Process Connector

Weight : 1.2 Kg

Estimated Lead Time : 8 - 10 weeks.

Manufacturer : Yokogawa

Product No. :  EJA530E-JAS8N-019DN/KS21/D4

Product type : EJA530E Gauge Pressure Transmitter

Output signal : J = 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

Measurement span (capsule) : A = 10 to 200 kPa (1.45 to 29 psi)

Wetted parts material : S = 316L SST Process connector, Hastelloy C-276 Diaphragm, 316L SST Others.

Process connections : 8 = G1/2 DIN 16 288 male

Amplifier housing : 1 = Cast aluminum alloy

Electrical connection : 9 = M20 female, two electrical connections with a blind plug

Integral indicator : D = Digital indicator

Mounting bracket : N = None

ATEX : KS21 = ATEX Intrinsically safe Approval *1*3 Applicable Standard: EN 60079-0:2012/A11:2013, EN 60079-11:2012, EN 60079-26:2007 Certificate: DEKRA 11ATEX0228 X II 1G, 2D Ex ia IIC T4 Ga, Ex ia IIIC T85?C T100?C T120?C Db Degree of protection: IP66/IP67 Amb. Temp. (Tamb) for EPL Ga: ?50 to 60?C (?58 to 140?F) Maximum Process Temp. (Tp) for EPL Ga:120?C Electrical data: Ui=30 V, Ii=200 mA, Pi=0.9 W, Ci=27.6 nF, Li=0 µH Amb. Temp. for EPL Db: –30 to 60°C *2 Max. surface Temp. for EPL Db: T85°C (Tp: 80°C), T100°C (Tp: 100°C), T120°C (Tp: 120°C)

Calibration units : D4 = M calibration (kgf/cm2 unit)

Weight : 1.2 Kg

Shipping Weight : 2.5 Kg

Estimated Lead Time : 4 - 6 weeks.

Manufacturer : Yokogawa

Product No. : EJA530E-JBH8N-019EL/D3

Product type : EJA530E Gauge Pressure Transmitter

EJA530E : Gauge Pressure Tansmitter

J - Output signal : 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

B - Measurement span (capsule) : 0.1 to 2 MPa (14.5 to 290 psi)

H - Wetted parts material 

Process connector : Hastelloy C-276

Diaphragm : Hastelloy C-276

Others : Hastelloy C-276

8 - Process connection : G1/2 DIN 16 288 male

N - Always N

0 - Always 0

1 - Amplifier housing : Cast aluminum alloy

9 - Electrical connection : M20 female, two electrical connections with a blind plug

E - integral indicator : Digital indicator with the range setting switch (push button)

L - Mounting bracket : 316 SST 2-inch pipe mounting

D3 - Calibration units : bar calibration (bar unit)

Weight : 1.2 Kg

Estimated Lead Time : 8 - 10 weeks.

Manufacturer : Yokogawa

Product No. : EJA530E-JBS4N-012DL/D4

Product type : EJA530E Gauge Pressure Transmitter

EJA530E : Gauge Pressure Tansmitter

J - Output signal : 4 to 20 mA DC Output with digital communication (HART 5/HART 7 protocol)

B - Measurement span (capsule) : 0.1 to 2 MPa (14.5 to 290 psi)

S - Wetted parts material 

Process connector : 316L SST

Diaphragm : Hastelloy C-276

Others : 316L SST

4 - Process connection : 1/2 NPT female

N - Always N

0 - Always 0

1 - Amplifier housing : Cast aluminum alloy

2 - Electrical connection : 1/2 NPT female, two electrical connections without blind plugs

D - integral indicator : Digital indicator

L - Mounting bracket : 316 SST 2-inch pipe mounting

D4 - Calibration units : M calibration (kgf/cm2 unit)

Weight : 1.2 Kg